DOI QR코드

DOI QR Code

Design of a 1~10 GHz High Gain Current Reused Low Noise Amplifier in 0.18 ㎛ CMOS Technology

  • Seong, Nack-Gyun (Department of Electronics and Computer Engineering, Hanyang University) ;
  • Jang, Yo-Han (Department of Electronics and Computer Engineering, Hanyang University) ;
  • Choi, Jae-Hoon (Department of Electronics and Computer Engineering, Hanyang University)
  • Received : 2010.12.24
  • Accepted : 2011.02.07
  • Published : 2011.03.31

Abstract

In this paper, we propose a high gain, current reused ultra wideband (UWB) low noise amplifier (LNA) that uses TSMC 0.18 ${\mu}m$ CMOS technology. To satisfy the wide input matching and high voltage gain requirements with low power consumption, a resistive current reused technique is utilized in the first stage. A ${\pi}$-type LC network is adopted in the second stage to achieve sufficient gain over the entire frequency band. The proposed UWB LNA has a voltage gain of 12.9~18.1 dB and a noise figure (NF) of 4.05~6.21 dB over the frequency band of interest (1~10 GHz). The total power consumption of the proposed UWB LNA is 10.1 mW from a 1.4 V supply voltage, and the chip area is $0.95{\times}0.9$ mm.

Keywords

References

  1. FCC, "Final rule of the Federal Communications Commission, 47 CFR Part 15,Sec. 503," Federal Register, vol. 67, no. 95, May 2002.
  2. DS-UWB Physical Layer Submission to 802.15 Task Group 3a, [Online]. Available: ftp://ftp.802wirelessworld.com/15/04/15-04-0137-03-003a-merger2-proposal-ds-uwb-update.doc.
  3. Multi-Band OFDM Physical Layer Proposal for IEEE 802.15 Task Group 3a, [Online]. Available: ftp://ftp.802wirelessworld.com/15/Archive/2003/Jul03/03268r3P802-15_TG3a-Multi-Band_CFP-Document. doc.
  4. Aly Ismail, Asad A. Abidi, "A 3-10-GHz low-noise amplifier with wideband LC-ladder matching network," IEEE Journal of Solid-State Circuits, vol. 39, no. 12, pp. 2269-2277, Dec. 2004. https://doi.org/10.1109/JSSC.2004.836344
  5. Z. D. Huang, Z. M. Lin, and H. C. Lai, "An high gain low noise amplifier with current-reused technique for UWB applications," IEEE Conference on Electron Devices and Solid-State Circuits, Proc., pp. 977-980, Dec. 2007.
  6. Zhe-Yang Huang, Che-Cheng Huang, Yeh-Tai Hung, and Meng-Ping Chen, "A CMOS current reused low-noise amplifier for ultra-wideband wireless receiver," International Conference on Microwave and Millimeter Wave Technology, Proc., pp. 1499-1502, Apr. 2008.
  7. Yi-Jing Lin, S. S. H. Hsu, Jun-De Jin, and C. Y. Chan, "A 3.1-10.6 GHz ultra-wideband CMOS low noise amplifier with current-reused technique," IEEE Microwave and Wireless Components Letters, vol. 17, no. 3, pp. 232-234, Mar. 2007. https://doi.org/10.1109/LMWC.2006.890503
  8. Shou-Chien Huang, Cheng-Hsiu Tsai, and Yue-Ming Hsin, "Low power consumption and high gain ultra wideband low noise amplifier," Microwave and Optical Technology Letters, vol. 51, no. 2, pp. 382-384, Feb. 2008.
  9. C. W. Kim, M. S. Jung, and S. G. Lee, "Ultrawideband CMOS low noise amplifier," IET Electronics Letter, vol. 41, no. 7, pp. 384-385, 2005. https://doi.org/10.1049/el:20058254
  10. T. Taris, J. B. Begueret, and Y. Deval, "A low voltage current reuse LNA in a 130 nm CMOS technology for UWB applications," European Microwave Integrated Circuit Conference, Proc., pp. 307-310, Oct. 2007.
  11. M. Chen, J. Lin, "A 0.1-20 GHz low-power selfbiased esistive-feedback LNA in 90 nm digital CMOS," IEEE Microwave and Wireless Components Letters, vol. 19, no. 5, pp. 323-325, May 2009. https://doi.org/10.1109/LMWC.2009.2017608
  12. Chang-Tsung Fu, Chien-Nan Kuo, and Stewart S. Taylor, "Low-noise amplifier design with dual reactive feedback for broadband simultaneous noise and impedance matching," IEEE Transactions on Microwave Theory and Techniques, vol. 58, no. 4, pp. 795-806, Apr. 2010. https://doi.org/10.1109/TMTT.2010.2041570
  13. H. Fouad, K. Sharaf, E. El-Diwany, and H. El-Hennawy, "An RF CMOS cascode LNA with currentreuse and inductance source degeneration," Radio Science Nineteenth National Conference, Proc., pp. 450-457, 2002.
  14. N. G. Seong, Y. H. Jang, and J. H. Choi, "Design and analysis of a compact ultra wideband CMOS low noise amplifier," Microwave and Optical Technology Letters, vol. 53, no. 2, pp.345-348, Feb. 2011. https://doi.org/10.1002/mop.25747
  15. Shih-Fong Chao, Jhe-Jia Kuo, Chong-Liang Lin, Ming-Da Tsai, and Huei Wang, "A DC-11.5 GHz low-power, wideband amplifier using splitting-load inductive peaking technique," IEEE Microwave And Wireless Components Letters, vol. 18, no. 7, pp. 482-484, Jul. 2008. https://doi.org/10.1109/LMWC.2008.925099
  16. Spectre Circuit Simulator, Cadence Design Systems, INC., www.cadence.com
  17. B. Kleveland, X. Qi, Madden, T. Furusawa, R. W. Dutton, M. A. Horowitz, and S. S. Wong, "High freqency characterization of on chip digital interconnects," IEEE Journal of Solid-State Circuits, vol. 37, issue 6, pp. 716-725, Jun. 2002. https://doi.org/10.1109/JSSC.2002.1004576
  18. Xiaomeng Shi, Jianguo Ma, Beng Hwee Ong, Kiat Seng Yeo, Manh Anh Do, and Erping Li, "Equivalent circuit model of on-wafer interconnects for CMOS RFICs," IEEE Radio and Wireless Conference, Dig., pp. 95-98, Sep. 2004.
  19. R. M. Weng, P. C. Lin, "A 1.5 V low-power common-gate low noise amplifier for ultra wideband receivers," IEEE International Symposium Circuits and Systems 2007, Dig., pp. 2618-2621, May 2007.
  20. Jeong-Yeon Kim, Chang-Wan Kim, "A 0.18-${\mu}$m CMOS UWB LNA combined with high-passfilter," Journal of the Korean Institute of Electromagnetic Engineering and Science, vol. 9, no. 1, Mar. 2009. https://doi.org/10.5515/JKIEES.2009.9.1.007

Cited by

  1. Design of a capacitor cross-coupled dual-band LNA with switched current-reuse technique 2014, https://doi.org/10.1080/00207217.2014.984641