• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.974-986
• /
• 2015

A novel inverter fault-tolerant control scheme is proposed to drive brushless DC motor. A fault-tolerant inverter and its three fault-tolerant schemes (i.e., phase A fault-tolerant, phase B fault-tolerant, and phase C fault-tolerant) are analyzed. Eight voltage vectors are summarized and a voltage vector selection table is used in the control scheme to improve the midpoint current of the split capacitors. A stator flux observer is proposed. The observer can improve flux estimation, which does not require any speed adaptation mechanism and is immune to speed estimation error. Global stability of the flux observer is guaranteed by the Lyapunov stability analysis. A novel stator resistance estimator is incorporated into the sensorless drive to compensate for the effects of stator resistance variation. DC offset effects are mitigated by introducing an integral component in the observer gains. Finally, a control system based on the control scheme is established. Simulation and experiment results show that the method is correct and feasible.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 춘계학술대회
• /
• pp.86-93
• /
• 1996

The lubrication characteristics of high-speed ball bearings has been investigated empirically using 45mm bore split inner ring ball bearings employed in small industrial gas turbine engines with oil-jet lubrication method. For the close structural simulation, experiments carried out with bearing mounting supports of real engines, such as bearing housings and oil nozzle assemblies with squeeze film dampers. Thus the results of tests can be directly applied to the design and the development of gas turbine engines. Testing was done by varying operating speeds, axial load on bearings, and lubricant flowrates. During testing, the temperature of bearing at outer-ring face, the power consumption of the driving motor, and the rotating resistance of the bearing were measured. From this study, the representative factors for lubrication characteristics at high speed was found, and the most important one was not operating speed but axial load up to 1.95 million dmN speed and 303 kgf axial load. Furthermore, the detailed variation of the rotational resistance of the bearing could be visualized by measuring the change of the radial load under the bearing supports. The rotational resistance consists of the frictional resistance and the bearing-cavity oil resistance.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.539-542
• /
• 2006

Many researches about next generation vehicles are trending toward HEV which has better fuel economy than an internal-combustion engine. But existing HEV has some defects at specific running states(eg. highway running It is possible that dual-mode hybrid system overcomes that defects. Mode change parameter, ${\gamma}$ helps to analyse the mode changing of dual mode hybrid and is applied at a numerical analysis on testing the performance. There is an additional constraint when vehicles drive on engine mode. No power assistance of battery applies on engine mode. Because vehicles must be sustained by only engine power while vehicle drives on constant speed mode. At the conclusion of this paper, graphs show the ability of motors that satisfy the equilibrium of the lever system. Designers can roughly determine capacities of the motors, parameters of the lever system by this analysing method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.1973-1991
• /
• 2018

Multimedia applications over wireless networks have been evolving to augmented reality or virtual reality services. However, a rich data size compared to conventional multimedia services causes bandwidth bottlenecks over wireless networks, which is one of the main reasons why those applications are not used widely. To overcome this limitation, bandwidth aggregation techniques, which exploit a multi-path transmission, have been considered to maximize link utilization. Currently, most of the conventional researches have been focusing on the user end problems to improve the quality of service (QoS) through optimal load distribution. In this paper, we address the joint pricing and load distribution problem for multi-homing in heterogeneous wireless access networks (ANs), considering the interests of both the users and the service providers. Specifically, we consider profit from resource allocation and cost of power consumption expenditure for operation as an utility of each service provider. Here, users decide how much to request the resource and how to split the resource over heterogeneous wireless ANs to minimize their cost while supporting the required QoS. Then, service providers compete with each other by setting the price to maximize their utilities over user reactions. We study the behaviors of users and service providers by analyzing their hierarchical decision-making process as a multileader-, multifollower Stackelberg game. We show that both the user and service provider strategies are closed form solutions. Finally, we discuss how the proposed scheme is well converged to equilibrium points.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1351-1365
• /
• 2019

This paper proposes two modified Z-source inverter topologies, namely an embedded L-Z-source inverter (EL-ZSI) and a coupled inductor L-Z source inverter (CL-ZSI). The proposed topologies offer a high voltage gain with a reduced passive component count and reduction in source current ripple when compared to conventional ZSI topologies. Additionally, they prevent overshoot in the dc-link voltage by suppressing heavy inrush currents. This feature reduces the transition time to reach the peak value of the dc-link voltage, and reduces the risk of component failure and overrating due to the inrush current. EL-ZSI and CL-ZSI possess all of the inherent advantages of the conventional L-ZSI topology while eliminating its drawbacks. To verify the effectiveness of the proposed topologies, MATLAB/Simulink models and scaled down laboratory prototypes were constructed. Experiments were performed at a low shoot through duty ratio of 0.1 and a modulation index as high as 0.9 to obtain a peak dc-link voltage of 53 V. This paper demonstrates the superiority of the proposed topologies over conventional ZSI topologies through a detailed comparative analysis. Moreover, experimental results verify that the proposed topologies would be advantageous for renewable energy source applications since they provide voltage gain enhancement, inrush current, dc-link voltage overshoot suppression and a reduction of the peak to peak source current ripple.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.155-162
• /
• 2019

The energy management technology for an independent fuel cell-battery hybrid system is developed for a household usage. To develop an efficient energy management technology, a simulation model is first developed. After the model is verified with experimental results, three energy management schemes are developed. Three control techniques are a fuzzy logic control (FLC), a state machine control (SMC), and a hybrid method of FLC and SMC. As the fuel cell-battery hybrid system is used for a house, battery state of charge (SOC) regulation is the most important factor for an energy management because SOC should be kept constant every day for continuous usage. Three management schemes are compared to see SOC, power split, and fuel cell power variations effects. Experimental results are also presented and the most favorable strategy is the state machine combined fuzzy control method.

• 영미문화
• /
• 제17권2호
• /
• pp.1-27
• /
• 2017

My aim in this paper is to provide a clear view of Victorian gender ideology and highlight the role played by Browning's dramatic monologues in the challenge against the strict patriarchal codes of the era. Laura Mulvey's Male Gaze theory in cinema is especially useful for understanding Browning's most well-known dramatic monologues, "Porphyria's Lover," and "My Last Duchess," because these poems are structured by polarities of looking and being looked at, the active and the passive. In her 1975 essay "Visual Pleasure and Narrative Cinema", Mulvey introduced the second-wave feminist concept of "male gaze" as a feature of gender power asymmetry in film. To gaze implies more than to look at – it signifies a psychological relationship of power, in which the gazer is superior to the object of the gaze. She declares that in patriarchal society pleasure in looking has been split between active/male and passive/female. Browning's women are subject to the male gaze, but they refuse to become the objects of a scopophilic pleasure-in-looking. Porphyria and the Duchess don't exist in order to satisfy the desires and pleasures of men. They reveal themselves as an autonomous being - reserved in Victorian gender dynamics for men. Mulvey advocates 'an alternative cinema' which can challenges the male-dominated Hollywood ideology. It is possible to say that Browning's dramatic monologues correspond to Mulvey's 'alternative cinema' because they show a counterview in terms of the representation of woman against the Victorian patriarchal ideology.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.156-160
• /
• 2005

기존의 표준공법과 신공법간의 품질특성치의 평균에 차이가 있는지를 알아보기 위한 가장 실용적인 실험 설계는 표준공법으로 진행되고 있는 공정을 신공법으로 바꾼 후에 연속적으로 생산해서 실험 자료를 얻는 것이다. 이 실험 자료로부터 평균 수율의 차이가 있는 지를 검정하기 위해서는 표준공법으로 연속해서 생산된 제품들의 수율에 관한 정보를 추가적으로 필요로 한다. 표준공법으로 연속해서 생산된 제품들의 수율에 관한 충분한 최근의 자료가 없으면 분할법에 의한 실험설계가 실용적인 설계이다. 분할법 I은 각 단계의 실험을 축차적으로도 실시할 수 있다는 장점이 있다. 단계 1에서는 표준공법과 신공법의 실시순서를 랜덤하게 정한다. 그다음에 정해진 방법에 따라서 연속해서 실험을 r회 실시한다. 단계 2,..., rep에서도 동일한 방법으로 실험을 실시한다. 분할법 II는 모든 실험을 한번에 실시하는 설계로, 두 개의 공정조건의 변경이 제한적으로 가능하다면 먼저 rep개의 반복을 갖는 각 공법을 2*rep개의 일차단위에 랜덤하게 배치하고, 일차단위에 랜덤하게 배치된 공정조건을 고정시키고 실험을 r회 반복한다. 분할법에서 일반적으로 공정조건을 변경하는데 비용과 시간이 많이 들어서 rep를 적게 하는 효율적인 실험의 반복수 ${\gamma}^*$을 결정하는 것이 엔지니어들의 관심사항이다. 분할법 I이나 분할법 II에서의 효율적인 실험의 반복수는 ${\gamma}^*$=6이고, 차선책은 ${\gamma}^*$=4이다.

• 한국작물학회지
• /
• 제37권5호
• /
• pp.405-412
• /
• 1992

경운과 무경운 조건에서 수도를 건답휴립직파할 때 질소분시비율이 수도의 생육과 수량성에 미치는 영향을 알기 위하여 직파재배용으로 육성중인 밀양 9005의 건조종자를 6kg / 10a 수준으로 1990년 5월 17일 산파하고, 맥류휴립산파기로 복토하였다. 질소-인산-가리를 15-10-10kg /10a 수준으로 시용하였는데 인산과 가리는 모두 기비로 시용하였다. 질소는 기비 : 담수직후 : 담수 2주후 : 출수 25일전 : 출수기에 요소를 10 : 20 : 30 : 20 : 20%, 20 : 30 : 20 : 20 : 10%, 30 : 40 : 0 : 20 : 10%로 분시하였고, 완효성시비료는 질소가 40%이고, 비효특속기간이 120일인 latex 피복한 요소를 전량기비로 시용하였다. 경운에서는 무경운에 비하여 출수기가 1일 지정되었고, 출수기의 엽면적지수가 컸으며, 도복지수가 적었을 뿐 입묘수, 수량, 수량구성요소, 도복관련형질 및 간기부의 cellulose, hemicellulose, lignin 함량은 차이가 없었다. 질소분시비율간에는 완효성비료 전량기비구에서 간장, 유효경비율, 간기중, 천립중, 수확지수가 더 컸으며, 무경운의 완효성비료 전량시비구에서 수량이 더 높았다. 완효성비료 시용구에서는 생육 초기에는 질소함유율과 흡수량이 가장 낮았지만, 출수기 이후에는 질소함유율과 흡수량은 다른 질소분시구보다 높았다. 분얼수는 완효성비료 시용구에서 가장 낮았고, 생육초기에는 질소의 기비비율이 높을수록 많았으며, 생육중기에는 20 : 30 : 20 : 20 : 10%의 분얼수가 가장 높았지만 유효경비율이 달라 수수는 처리간에 차이가 없었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.111-112
• /
• 2013

The three-phase four-leg voltage source inverter (VSI) topology can be an interesting option for the three phase-four wire system. With an additional leg, this topology can handle the neutral current, hence the DC link capacitance can be reduced significantly. In this paper the three dimensional space vector modulation (3D SVM) in ${\alpha}{\beta}{\gamma}$ coordinates for the three-phase four-leg VSI is presented. By using the 3D SVM method, the DC link voltage can be reduced by 16% compared with the split DC link capacitor topology and the output distortion can also be reduced under the unbalanced load condition.