• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.172-180
• /
• 2017

The repetitive control (RC) strategy is widely used in AC power systems because of its high performance in tracking period signal and suppressing steady-state error. However, the dynamic response of RC is determined by the fundamental period delay $T_0$ existing in the internal model. In the current study, a ($nk{\pm}i$)-order harmonic RC structure is proposed to improve dynamic performance. The proposed structure has less data memory and can improve the tracking speed by n/2 times. $T_0$ proves the effectiveness of the ($nk{\pm}i$)-order RC strategy. The simulation and experiments of ($6k{\pm}1$)-order and ($4k{\pm}1$)-order RC strategy used in the voltage source inverter is conducted in this study to control the harmonic current source, which shows the validity and advantages of the proposed structure.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.3-4
• /
• 2011

This paper presents a survey of floating power supply based on bootstrap operation for three-level voltage-source inverters. The floating power supply for upper switches is achieved by the bootstrap capacitor charged during on-time of the switch underneath. Hence, a large number of bulky isolated DC/DC power supplies for each gate driver are reduced. The Pspice simulation results show the behavior of bootstrap devices and the performance of bootstrap capacitor voltage.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.314-317
• /
• 1997

The purpose of this study is developing a converter which is able to convert a 300[KW] power, and is a DC power supply output a 1500[V] DC voltage for inverter driving. The power converter is driven by two converter serisely and keep a high power factor of power source. This system is haven all the characteristic of voltage source converter by having a processing ability of regenerating power. The two converters controls a PWM modulation and output voltage using a only one 16 bit DSP processor.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.896-902
• /
• 2018

본 논문에서는 환기를 위한 시로코 팬의 내부에서 유동 및 소음을 해석하기 위해 상용프로그램으로 해석하였다. 소음원의 위치와 크기만을 확인하기 위해 유동해석은 정상 상태 유동 해석을 진행하였다. 유동 해석을 통해 시로코 팬의 내부에서 발생하는 유동의 속도와 속도 벡터로 유동의 흐름을 보았다. 내부의 압력 분포는 contour로 결과를 보았다. 정상 상태 유동 해석 결과에서 Curle surface acoustic power와 Proudman acoustic power를 활용하여 해석결과로부터 소음원의 위치와 크기를 볼 수 있다. Curle surface acoustic power으로 표면에서 발생하는 소음을 볼 수 있다. Proudman acoustic power으로 유동영역에서 발생하는 소음을 볼 수 있다. 정상 상태에서 시로코 팬의 내부에서 발생하는 소음원의 위치와 크기만 볼 수 있기 때문에 발생하는 소음의 주파수를 확인하기 위해서는 추가적으로 비정상 상태 해석을 진행할 필요가 있다. 본 연구를 통해 시로코 팬의 성능을 향상시키고 소음을 저감하기 위한 연구의 기초 자료가 될 것으로 기대된다.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1545-1554
• /
• 2018

This paper proposes a modified control strategy to improve the performance of three-phase four-leg shunt active power filters (APFs) for the compensation of three phase unbalanced loads. Unbalanced current cannot be obtained accurately by a harmonic detector due to the lower frequency. The proposed control strategy eliminates conventional harmonic detectors by directly regulating the source current. Therefore, the computational complexity is greatly reduced and the performance of the APF is improved. A mathematic model has been developed based on the source currents. The corresponding controllers have been designed based on the sinusoidal internal model principle. The proposed control strategy can guarantee excellent compensation performance and stable operation after an extreme disturbance such as a short circuit fault. In addition, the proposed technique can selectively compensate specific harmonics. A 50kVA prototype APF is implemented in the laboratory to validate the feasibility and performance of the proposed control strategy.

• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.542-549
• /
• 2005

Impact sounds, such as those created by footsteps, the dropping of an object or the moving of furniture, can be a source of great annoyance In residential buildings. Running and jumping impact sound by child are one of the most irritating noises in an apartment buildings. It's necessary to know that the impact power characteristics of real impact source in an apartment buildings. This study aims to Investigate the impact power characteristics and impact power time of running and jumping by child. This study carried out investigation through the 159 children in school. The results of this study is that jumping impact power is greater than running impact power.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1054-1065
• /
• 2015

Multi-functional voltage source inverters (VSIs) have attracted increasing attention in recent years for their advantageous auxiliary services for power quality enhancement in autonomous microgrids. These types of VSIs can not only achieve a proper control scheme in autonomous mode but also cope with the prescribed power quality and stability requirements. These functionalities are integrated within the same device, thereby significantly improving the cost-effectiveness of microgrids while decreasing the investment and bulk compared with those of multiple devices with independent functionalities. Control strategies for power quality enhancement in autonomous microgrids using multi-functional VSIs are comprehensively reviewed in this paper. In addition, such VSIs are discussed in detail, and comparisons of which are also provided. Lastly, a number of future research directions for multi-functional VSIs are recommended.

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4692-4697
• /
• 2014

태양광 전원은 태양광 패널이 설치된 지역의 위치와 날씨 그리고 기후 등에 매우 큰 영향을 받으며, 전원으로서의 사용시간의 제한과 출력의 불확실성이라는 특성을 갖는다. 이러한 태양광 전원의 불확실성을 가능한 줄이기 위해, 태양광 전원의 출력에 대한 오랜 기간 동안의 데이터를 분석하여 출력의 평균값을 산출해 내었다. 태양광 전원의 출력의 평균값은 태양광 전원에 직접 연결되어 그리드에 안정적인 전력을 공급하기 위한 Li 에너지 저장장치의 적정 용량산정과 운용방식에 꼭 필요한 데이터이며, 이로부터 Li 배터리의 충방전모드에 의해 그리드에 일정한 출력의 전력을 공급하는 것이 가능하도록 하였다. 태양광 전원과 Li 배터리를 포함하는 시스템이 악조건의 그리드 운전상태에서의 동작특성을 관찰하기 위해 Li 배터리의 충전율이 100%에서 10%로 단시간에 감소될 정도의 과부하 상태에 대해 태양광 전원과 Li 배터리의 운용특성을 분석하고 Li 배터리 셀 단위의 출력 및 온도특성을 해석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.77-81
• /
• 2004

In this paper a novel line interactive UPS (Uninterruptible Power Supply) using the two 4-leg VSCs and AC line reactor is proposed. The 4-leg Voltage Source Converter(VSC) can use the DC link voltage effectively by the 3-D SVPWM method. Hence the DC battery voltage can be reduced by $15\%$ in comparison to that of the conventional line-interactive UPS system. One VSC is in parallel with the AC line reactor of the power source side, and the other is in series with the load. The parallel 4-leg voltage source inverter controls three-phase line voltage independently in order to control the line reactor current indirectly. It eliminates the neutral line current and the active ripple power of the source side using the pqr theory so that unity power factor and the sinusoidal source current can be achieved even though both the source and the load voltages have zero sequence components. The series 4-leg voltage source inverter compensates the line voltage and allows the load voltage to be balanced and harmonic-free. Both of parallel and series 4-leg voltage source inverters always act as independently controllable voltage sources, so that three-phase output voltage shows a seamless transition to the backup mode. The feasibility of the proposed UPS system has been investigated and verified through computer simulation results.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.232-238
• /
• 2015

This work describes the development of a D-band (110-170 GHz) signal source based on a SiGe BiCMOS technology. This D-band signal source consists of a V-band (50-75 GHz) oscillator, a V-band amplifier, and a D-band frequency doubler. The V-band signal from the oscillator is amplified for power boost, and then the frequency is doubled for D-band signal generation. The V-band oscillator showed an output power of 2.7 dBm at 67.3 GHz. Including a buffer stage, it had a DC power consumption of 145 mW. The peak gain of the V-band amplifier was 10.9 dB, which was achieved at 64.0 GHz and consumed 110 mW of DC power. The active frequency doubler consumed 60 mW for D-band signal generation. The integrated D-band source exhibited a measured output oscillation frequency of 133.2 GHz with an output power of 3.1 dBm and a phase noise of -107.2 dBc/Hz at 10 MHz offset. The chip size is $900{\times}1,890{\mu}m^2$, including RF and DC pads.