• 대한전자공학회논문지TC
• /
• 제42권6호
• /
• pp.53-60
• /
• 2005

옥내$\cdot$외의 전력선 환경에 대한 정확한 채널 모델링에 관한 노력이 최근에 이루어지고 있다 알려진 일반 제한과 발표된 모델들은 특별한 형태의 접근들이었다. 본 논문은 더 신속하고 효율적인 전력선 통신 실험을 위한 전력선 채널 특성 측정에 관한 연구이다. 용량성 부하 시뮬레이터는 전력선 옥내 망 모뎀 개발에 필수적인 장비이다. 총 2:H가지 경우의 용량성 부하 변화에 대한 주파수 응답 특성 측정으로 채널 데이터 베이스화를 수행하였다. 본 측정 실험에서 전력선통신 채널은 보다 더 확정적인 매체라는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1067-1070
• /
• 2002

The maximum demand power management system(the demand controller) is an equipment for demand management. If the pre-estimated load is over the preset power, the demand controller make warnings and break the load circuit according to predefined priority. Then consumption power is maintained below the maximum demand power level. The DTU receives the control commands from demand controller, and then controls loads. In this paper, the power line cables are used for communication between the demand controller and DTUs and monitoring PC. The experiments show that the proposed system is compatible with the conventional system, and feasible for new or remodeling plant.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.480-481
• /
• 2009

In the paper we study for the ubiquitous networking based on power line communication technology with digital signal transmission. The necessity of research for using resources in the network effectively is being increase as network to use the PLC with smart grid networking. The data rate has compared with implemented modem 250Mbps in the pixel resolution and bandwidth, which has degraded with 80%. We also proposed for design of high-definition digital signal transceiver, which has used in the network between digital multimedia with PLC. Using resources in the network effectively can be also verified with this research.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.160-162
• /
• 2006

In this paper, a heterogeneous home network is designed and implemented based on the PLC (power line communications) and the IEEE 802.15.4. This paper presents the need of the heterogeneous home network and the convergence sub-layer. The convergence sub-layer is designed and implemented on the Xelline power line communication modem with IEEE 802.15.4 communication module.

• 대한전자공학회논문지TE
• /
• 제42권3호
• /
• pp.7-12
• /
• 2005

본 논문에서는 전력선 통신 시스템에서 낮은 임피던스에 의한 에러율의 저하를 개선하기 위하여 제안한 D급 증폭 회로를 사용한 구동 회로를 적용하였다. 전력선 모뎀에 사용되는 전압 구동 회로와 전류 구동 회로를 제작하고, 본 논문에서 제안한 D급 증폭 회로를 이용한 구동 회로와 비교하여 실험을 하였다. 실험 결과 본 논문에서 설계한 구동 회로가 다른 구동 회로보다 급격하게 임피던스 변화하는 전력선 채널에 대하여 성능이 우수함을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2559-2561
• /
• 2002

This paper presents a systematic method of probing channel characteristics and communication reliabilities of home PLC (power line communication) network applied to the Internet accessed control of home appliances. The effects of the three performance deterioating factors, i.e., additive noise, channel attenuation, and intersymbol interference, can be systematically measured by applying the channel probing waveform in the frequency range from 100kHz to 450kHz. The agreement between the derived probability of bit error and the measured probability of bit error supports the validity of the proposed approach of probing home power line channel characteristics. The experimental results performed with the constructed test-bed applying the proposed channel probing method also support the feasibility of commercially deploying the PLC modem installed home appliances and their services for the Internet accessed home automation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.321-325
• /
• 2001

Servo drives with microcomputer control provide the possibility of using modem and sophisticated control algorithms. As an additional feature it is possible to implement parallel and/or redundant software and hardware structures to realise safe motion or similar security functions. Unfortunately microcomputer control also has some impact on the behaviour of servo drives. Control algorithm, cycle time, sensors and interface have to be perfectly synchronised. Special control schemes are necessary on the line side (power supply) to meet the actual requirements concerning EMC. This contribution presents experiences and results obtained from a modem digital drive system pointing out the influences of low and high accuracy position sensors and the interdependencies mentioned above.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.427-428
• /
• 2008

We have studied design and application about an self generation equipment for underground power transmission cable. The split CT(Current Transformer), which has the applicable underground power transmission cable, was manufactured through electromagnetic simulation of magnetic core. And manufactured the AC-DC converter that supplied stable DC power for PLC modem when current of power line has more than 150A. An self generation equipment using the CT and AC-DC converter get into operation the PLC modem consistently. As a result, the underground power transmission cable was showed the application possibility through the stable communication and network characteristics.

• 한국통신학회논문지
• /
• 제17권9호
• /
• pp.951-962
• /
• 1992

전력선은 동축선이나 광섬유 링크와는 대조적으로 제한된 전송전력, 높은 부하 간섭과 잡음, 가변하는 감쇠 및 임피던스 레벨 등의 문제를 안고 있으나, 별도의 통신선로가 필요없이 신호와 전원을 동시에 제공 할수 있는 잇점이 있으므로 가정 자동화 및 근거리 통신 목적으로 가치 있는 채널을 제공한다. 본 논문에서는 이러한 220V의 AC전력선을 이용하여 1200bps의 디지털 신호를 송수신할 수 있는 OOK BASK모뎀을 구현하였다. 수신 신호의 복조를 위해 비동기 검파 방식을 택하였으며, 연성판정(soft decision)을 수행하였다. 대부분의 과정을 단일 칩 마이크로 프로세서를 이용하여 하드웨어를 대폭 간소화하였다. 또한 유럽의 표준인 CENELEC의 규격에 적합하도록 설계되었으며, 가정 자동화 시스템으로 적절히 응용될 수 있음을 확인하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권3호
• /
• pp.330-335
• /
• 1999

Recently, there a lot of activities on the researches that implement many kinds of control system using power lines. To implement that, it is desirable to use hybrid PSK model because it takes advantage of PSK and DPSK which has a low-bit-error rate. In this parer, we implement the transmitter of this model. Because the power line is not designed for the data communication, we separated the signal generator circuit and the signal loading circuit so that minimized noises from outside. Also, to make it easy on the experiments, most of process are performed by software. As a result, transmitting a high frequency signal on the power line made no effects on the electrical devices.