• Tribology and Lubricants
• /
• 제34권1호
• /
• pp.16-22
• /
• 2018

Cylindrical turbine guide bearings (TGBs) with simple plain pads have conventionally been used in vertical hydro-power turbine-generator applications in order to provide turbine runner shafts with smooth rotation guides and supports. To overcome low-load/low-eccentricity performance drawbacks, such as very low film stiffness and lack of design credibility in the stiffness values themselves, of conventional cylindrical TGBs, the introduction of a rotational-directional leading-edge taper to each partitioned pad, simply pad leading-edge taper, has been found to be very effective in enhancing their design-application availability and usefulness. In this study, we investigate the effects of taper angle and length for given taper heights in detail in order to systematically establish the effectiveness of design on the performance improvement of vertical hydro-power application cylindrical TGBs with pad leading-edge tapers. The analysis results with $4-Pad{\times}1-Row$ cylindrical TGBs show that the lubrication performance of the cylindrical TGBs is optimized with an approximate taper angle ratio of 0.8 and taper length ratio of 0.9. We conclude that the introduction of pad leading-edge tapers along with the optimization of taper designs can be very effective in improving the overall operation reliability of cylindrical TGBs and the rotordynamic characteristics of vertical hydro-power turbine-generator rotor-bearing systems as well, to which the TGBs are applied.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권1호
• /
• pp.239-260
• /
• 2023

The underwater acoustic wireless communication networks are generally formed by the different autonomous underwater acoustic vehicles, and transceivers interconnected to the bottom of the ocean with battery deployed modems. Orthogonal frequency division multiplexing (OFDM) has become the most popular modulation technique in underwater acoustic communication due to its high data transmission and robustness over other symmetrical modulation techniques. To maintain the operability of underwater acoustic communication networks, the power consumption of battery-operated transceivers becomes a vital necessity to be minimized. The OFDM technology has a major lack of peak to average power ratio (PAPR) which results in the consumption of more power, creating non-linear distortion and increasing the bit error rate (BER). To overcome this situation, we have contributed our symmetry research into three dimensions. Firstly, we propose a machine learning-based underwater acoustic communication system through long short-term memory neural network (LSTM-NN). Secondly, the proposed LSTM-NN reduces the PAPR and makes the system reliable and efficient, which turns into a better performance of BER. Finally, the simulation and water tank experimental data results are executed which proves that the LSTM-NN is the best solution for mitigating the PAPR with non-linear distortion and complexity in the overall communication system.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.149-154
• /
• 2023

In the Fourth Industrial Revolution, hydrogen energy is in the spotlight. There is a difficulty in commercialization due to the lack of hydrogen infrastructure. Therefore, a lot of hydrogen should be imported and a method using ammonia is the most useful. In this study, using the mixed gas of hydrogen and nitrogen generated when ammonia is decomposed, the hydrogen separation performance is to be tested. Hydrogen was separated using an electrochemical hydrogen compressor based on a fuel cell and the experiment was conducted by changing the ratio of hydrogen and nitrogen. In addition, the performance was also compared by the difference both the pressure and the membrane.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.131-139
• /
• 1999

A Numerical Analysis of NOx production in Hydrogen-Air flame is performed using the quasi-laminar reaction modelling. As results, in low global strain rate region, $U_F/D_F\;{\leq}\;50,000$, the quasi-laminar reaction modelling reproduces the experimentally observed EINOx half power scaling that the ratio of EINOx and flame residence time, $L_f^3(D_F^2U_F)$, is proportional to the square root of global strain rate. Thus, it suggests that turbulence-chemistry interaction has a minor impact on the trend of NOx production in low global strain rate region. However, the quasi-laminar reaction modelling predicts the higher temperature and NOx than experimentally observed. This overprediction may be due to the lack of radiation and quasi-laminar reaction modelling.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.277-280
• /
• 2003

The purpose of this study is for the active use of the fly ash, which is a by-product of the combustion pulverizes coal thermal power plants, to compensate for the lack of landfill and for conservation of energy, by using fly ash as the supplementary cementitious material, and to prove its possibility as the related products of the cement. First of all, we examined strength development of Micro grinding fly ash by elevating its fineness and using $Na_{2}SO_{4}$ as an activator to elevate pozzolanic reaction of fly ash. Following fly ash replacement ratio and curing temperature we hope to prove its properties to suggest its possibility in the concrete and cement industry. In case of water curing, the more fineness and higher annexing of activator is, the higher strength is, and the higher curing temperature is the more pozzolanic reaction happens.

• 대한가정학회지
• /
• 제35권2호
• /
• pp.217-234
• /
• 1997

This study attempts to analyze some determinants of consumers' medical service quality and their complaining behavior. The results can be summerized as follows: 1. The determinants of consumers' perceived medical service quality could be categorized as five factors; i.e. nursery, hospital environment, medical doctors, other staffs service fee. Among them nursery sector consists of 32% variance. 2. According to the discriminant analysis, those determinants are of great value to distinguish between satisfied/unsatisfied group. The hit ratio was 85.4% which is relatively high score. 3. The type of complaining behavior could be grouped into no action, private and public complaining behavior. Most of respondents belonged to no action group and a few showed private complaining behavior. Any respondents who were willing to show public complaining behavior could not be found out. 4. These variables which influence complaining behavior were preconception toward hospital, barrier to complaining process and expected complaining behavior. Among them the first one was most influential variable. 5. In order to distinguish between complaining/non complaining behavior group, discriminant analysis was done. The result showed the above three variables had a significantly discriminatory power, the hit ratio reaching above 70%. In summary, we can see that consumers' evaluation on the whole medical service depends on the external factor such as staffs' attitude or hospital facilities due to the lack of their ability to evaluate highly specialized service like doctor's treatment.

• 한국태양에너지학회 논문집
• /
• 제39권3호
• /
• pp.29-45
• /
• 2019

As the solar energy market grows, the need to investigate the potential of photovoltaic system is being highlighted. However, due to the lack of plain field, the system on top of buildings is being exploited. This paper analyzes the potential to install PV systems on the rooftops. First of all, with the aid of a photovoltaic system simulation software, buildings were designed in a specific area based on the architectural data. And then, with the same software, the potential to install photovoltaic system was explored by placing PV modules on the buildings' rooftops. The installation potential was calculated and simulated with consideration for obstacles on the rooftops. The parameters are composed of available area for system installation, area utilization rate, PV system power capacity, operation yield hour per day and performance ratio. In the simulation, 5 sites were analyzed based on their architectural data. In the end, reliable data that can be utilized were collected for the potential to install the system with the photovoltaic system simulation software.

• Wind and Structures
• /
• 제36권3호
• /
• pp.161-174
• /
• 2023

The analytical model of tornado vortices plays an essential role in tornado wind description and tornado-resistant design of civil structures. However, there is still a lack of guidance for the selection and application of tornado analytical models since they are different from each other. For single-cell tornado vortices, this study conducts a comparative study on the velocity characteristics of the analytical models based on numerically simulated tornado-like vortices (TLV). The single-cell stage TLV is first generated by Large-eddy simulations (LES). The spatial distribution of the three-dimensional mean velocity of the typical analytical tornado models is then investigated by comparison to the TLV with different swirl ratios. Finally, key parameters are given as functions of swirl ratio for the direct application of analytical tornado models to generate full-scale tornado wind field. Results show that the height of the maximum radial mean velocity is more appropriate to be defined as the boundary layer thickness of the TLV than the height of the maximum tangential mean velocity. The TLV velocity within the boundary layer can be well estimated by the analytical model. Simple fitted results show that the full-scale maximum radial and tangential mean velocity increase linearly with the swirl ratio, while the radius and height corresponding to the position of these two velocities decrease non-linearly with the swirl ratio.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.897-910
• /
• 2012

Inappropriate communications can cause a lack of necessary information exchange between operators and lead to serious consequences in large process systems such as nuclear power plants (NPPs). In this regard, various kinds of taxonomies of inappropriate communications have been developed to prevent inappropriate communications. However, there seems to be difficult to identify inappropriate communications from verbal protocol data between operators. Because the existing taxonomies were developed for use in report analysis, there is a problem of 'uncertainty'. In consequence, this paper proposes a new taxonomy of inappropriate communications and provides some insights to prevent inappropriate communications. In order to develop the taxonomy, existing taxonomies for four industries from 1980 to 2010 were collected and a new taxonomy is developed based on the simplified one-way communication model. In addition, the ratio of inappropriate communications from 8 samples of audio-visual format verbal protocol data recorded during emergency training sessions by operating teams is compared with performance scores calculated based on the task analysis. As a result, inappropriate communications can be easily identified from the verbal protocol data using the suggested taxonomy, and teams with a higher ratio of inappropriate communications tend to have a lower performance score.

• 한국토양비료학회지
• /
• 제45권1호
• /
• pp.107-111
• /
• 2012

Eight marine sediments from Busan port in Korea were annually analyzed to examine the concentration distribution of dioxins from 2006 to 2010. Yearly mean concentration of dioxins ranged from 186.3 to $383.3pg\;g^{-1}$ in real values and 5.087 to 8.541 pg-TEQ (Toxicity equivalency) based on dry weight of samples. The dioxin concentration at the site near fishing market was the highest concentration among all sampling sites. Also the dioxin concentration at the sites with various pollutant sources such as large ships, sewage influx and thermal power station as well as fishing market was higher than that of the sites without specific pollutant sources. Another main factor that affects the dioxin concentration is topography characteristics of the bay. The bay has relatively high dioxin concentration because of the lack of the pollutant diffusion. This study demonstrated that the dioxin concentration in the site with pollutant sources and the lack of the pollutant diffusion was relatively high as compared with the other sites. As a result of contribution ratio of dioxin congeners, OCDD (Octachlorodibenzodioxin) in all sites was major contributor in real value, in contrast, dioxin congeners in TEQ values were dominated by 2,3,4,7,8-PeCDF.