• 연구논문집
• /
• s.29
• /
• pp.29-38
• /
• 1999

In comparison with gasoline engine, LPG direct injection engine has some advantages not only in emission and fuel efficiency but also in prevention of power decrease and back fire etc. which are disadvantages of conventional LPG engine. In this study, comparision tests of the incylinder spray and combustion characteristics between of LPG and gasoline fuels were performed in the RCEM as a basic research for the development of future LPG engine with low emission and high fuel efficiency During the direct injection of LPG fuel and gasoline into the inside of RCEM, spray development characteristics according to the injection condition have been photographed by the high speed shadow graph methods. The conditions for the optimum mixture distribution of LPG and gasoline fuels are achievable at the selected ignition timing, respectively.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.29-34
• /
• 2017

Over the past several decades, embedded system and flight control computer technologies have been evolved to meet the diverse needs of the mobile device market. Current embedded systems are at the heart of technologies that can take advantage of small-sized specialized hardware while still providing high-efficiency performance at low cost. One of these key technologies is multiple memory banks. For example, a dual memory bank can provide two times more memory bandwidth in the same memory space. This benefit take lower cost to provide the same bandwidth. However, there is still few software technologies to support the efficient use of multiple memory banks. In this study, we present a technique to efficiently exploit multiple memory banks by software support. Specifically, our technique use an interference graph to optimally allocate data to different memory banks by an optimizing compiler. As a result, the execution time can be improved upto 7% with the proposed technique.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.255-259
• /
• 2008

In this paper, a current-mode integrator for low-voltage, low-power analog integrated circuits is presented. Using the proposed current-mode integrator, the baseband analog filter is designed for WCDMA wireless communication. To verify the proposed current-mode integrator circuit, Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS parameter is performed and achieved 44.9dB gain, 15.7MHz unity gain frequency. The described 3rd-order current-mode baseband analog filter is composed of the proposed current-mode integrator, and SFG(Signal Flow Graph) method is used to realize the baseband filter. The simulated results show 2.12MHz cutoff frequency which is suitable for WCDMA baseband block.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.177-185
• /
• 2005

This paper proposes an expert system that can enhance the accuracy of real-time bus reconfiguration strategy by adopting the local minimum tree search method and that can minimize the spreading effect of the fault by considering the operating condition when a main transformer fault occurs in an automated substation. The local minimum tree search method is used to expand the best-first search method. This method has the advantage that it can improve the solution performance within the limits of the real-time condition. The inference strategy proposed expert system consists of two stages. The first stage determines the switching candidate set by searching possible switching candidates starting from the main transformer or busbar related to the event. The second stage determines the rational real-time bus reconfiguration strategy based on heuristic rules from the obtained switching candidate set. Also, this paper proposes generalized distribution substation modeling using graph theory, and a substation database based on the study results is designed.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.12-17
• /
• 2010

The poppet valve had used every field area due to high quality of leakage property and response characteristic. But this valve still has terrible disadvantage that is self-exited vibration. This problem affects stability of total system and raises noise. The researcher tries to reduce that self-exited vibration when valve was designed. The stability discriminant is the typical study to improve the performance of the poppet valve. This paper concerns about stability discriminant that uses poppet valve with a drain orifice. At the first, the mathematical model is computed from poppet valve. After that, the limitation of stability is calculated that based on Nyquist criterion. At the final, the stability discriminant is selected in each condition and the graph that shows stability in the system is drown by dimensionless quantity.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2620-2623
• /
• 2000

The standard approach consists of using correlation of orthogonal functions in digital filtering, such as well-known FFT(Fast Fourier Transform) and FWT(Fast Walsh Transform). But it needs much calculations, multiplications and additions. The calculation amount is m $log_2m$ in the general case. Therefore, this requires high speed processors to calculate in real time, which can calculate floating point. This study developed improved fast Walsh transform based on dyadic-ordered fast Walsh transform, then regenerated signal flow graph of improved fast Walsh transform, and used it for digital filtering, and then measured fundamental frequency and harmonics for current and voltage signals of power system.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.05a
• /
• pp.100-105
• /
• 2005

Development of complex discrete event simulators requires cooperation between domain experts and modeling experts who involve the development. With the cooperation the domain experts derive user requirement and modeling experts transform the requirement to a simulation model. This paper proposes a method for consistency verification of simulation model in DEVS formalism against the user requirement in UML diagrams. It also presents an automated tool, called VeriDEVS, which implements the proposed method. Inputs of VeriDEVS are three UML diagrams, namely use case, class and sequence diagrams, and DEVS Graph, all in Visio; outputs of a verification result is represented in PowerPoint files.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1236-1248
• /
• 1991

A new fast algorithm for computing the discrete cosine transform(DCT) Is developed decomposing N-point DCT into an N /2-point DCT and two N /4 point transforms(transpose of an N /4-point DCT. TN/t'and)It has an important characteristic that in this method, the roundoff noise power for a fixed point arithmetic can be reduced significantly with respect to the wellknown fast algorithms of Lee and Chen. since most coefficients for multiplication are distributed at the nodes close to the output and far from the input in the signal flow graph In addition, it also shows three other versions of factorization of DCT matrix with the same number of operations but with the different distributions of multiplication coefficients.

• Journal of the Korean Magnetic Resonance Society
• /
• v.17 no.2
• /
• pp.92-97
• /
• 2013

We study the electron spin resonance line-width (ESRLW) of $Fe^{3+}$ in crystalline $LiNbO_3$ ; the ESRLW is obtained using the projection operator method (POM) developed by Argyres and Sigel. The ESRLW is calculated to be axially symmetric about the c-axis and is analyzed by the spin Hamiltonian with an isotopic g factor at a frequency of 9.5 GHz. The ESRLW increases exponentially as the temperature increases, and the ESRLW is almost constant in the high-temperature region (T>8000 K). This kind of temperature dependence of the ESRLW indicates a motional narrowing of the spectrum when $Fe^{3+}$ ions substitute the $Nb^{5+}$ ions in an off-center position. It is clear from this feature that there are two different regions in the graph of the temperature dependence of the ESRLW.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.35
• /
• pp.1-8
• /
• 1995

Automatic inspection system software for display image characteristic of CRT is developed. There are two major contributions of this software development. One is that the data from measuring equipments which was usually collected manually is automatically collected through RS-232C port and is saved in computer, then, trend analysis graph and final reports are generated. The other is that evauation of characteristic of electron gun was automatically processed by CCD camera and image processing technique. The system is developed under MS-Windows environment utilizing Borland C++4.0 Compiler and DT 3852-8 image processor board. This system can save the time and man power to measure and to anayze the image characteristics relative to current method.