• Journal of Digital Convergence
• /
• v.18 no.9
• /
• pp.285-295
• /
• 2020

The purpose of this study was to identify factors affecting college-based stress and develop stress-relieving educational programs. Data were collected from 169 students in G-province, from June 15th to july 15th, 2020. Analysis was done using IBM SPSS 21.0 for frequency, percentage, average, standard deviation, t-test, ANOVA, Pearson correlation coefficient, and Multiple regression. College-based stress positively correlated with life event, life event importance, interpersonal emotion, and self-control. The most important factor affecting college-based stress was psychological hardiness (β=-.323, p<.001), followed by club activities (β=.237, p<.001), interpersonal conflict (β=.215, p=.001), grade-2 (β=-.203, p=.001), department adaptation (β=.161, p=.010), and age-21 (β=-.149, p=.024). The explanatory power was 44.4% (F=42.43, p<.001). The results of this study are expected to be used as basic data for the development of educational programs for stress reduction at the university level. Therefore, educational programs considering age and grade, using club activities as support systems, and dealing with psychological hardiness and department adaptation are needed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.298-309
• /
• 2019

Objectives: This study aimed to investigate stages of safety and health culture change through a reflection on 40 years of hearing conservation history at a multinational company. Methods: The target workplaces were multinational companies with more than 1,000 employees. The research used the clinical case study and system analysis methods based on direct observation of the research from 1994 to 2009. The latter method performed an analysis of the equilibrium state of the cross-section in the given period and the longitudinal profile of the change during the given period. Results: The stages of cultural change are divided into five stages and summarized as follows. In the first stage, workplace noise was not widely recognized as a hazard, while in the second stage, the measurement of noise levels and audiometric testing were conducted under the Korean Occupational Safety and Health Act (KOSHA). The driving force for change in the second stage was the amendment of the KOSHA. In the third stage, noise came to be recognized as a hazard factor through awareness training. The driving force of change during the third stage was the strong executive power exerted by the audit of the industrial hygiene program from the US head office. In the fourth step, there was a change to actually reduce noise. The driving force in this stage was a change in company executives' risk perception resulting from lawsuits over noise-induced hearing loss and the task force team activities for culture change based on the action learning protocol. At the fifth stage, a 'buy quiet policy' was institutionalized. The management's experience that noise reduction was difficult was the motivation to manage noise from the time of purchase of equipment. Conclusions: The activities of a hearing conservation program are determined by the improvement of the legal system and by the way it is enforced. Noise control activities to reduce noise areas may be possible through the shared risk perception of noise-induced hearing loss and by a change agent role as a facilitator to implement noise control.

• Asia pacific journal of information systems
• /
• v.18 no.2
• /
• pp.1-14
• /
• 2008

According to technology acceptance model(TAN) which is one of the most important research models for explaining IT users' behavior, on intention of using IT is determined by usefulness and ease of use of it. However, TAM wouldn't explain the performance of using IT while it has been considered as a very good model for prediction of the intention. Many people would not be confirmed in the performance of using IT until they can control it at their will, although they think it useful and easy to use. In other words, in addition to usefulness and ease of use as in TAM, controllability is also should be a factor to determine acceptance of IT. Especially, there is a very close relationship between controllability and ease of use, both of which explain the other sides of control over the performance of using IT, so called perceived behavioral control(PBC) in social psychology. The objective of this study is to identify the relationship between ease of use and controllability, and analyse the effects of both two beliefs over performance and intention in using IT. For this purpose, we review the issues related with PBC in information systems studies as well as social psychology, Based on a review of PBC, we suggest a research model which includes the relationship between control and performance in using IT, and prove its validity empirically. Since it was introduced as qa variable for explaining volitional control for actions in theory of planned behavior(TPB), there have been confusion about concept of PBC in spite of its important role in predicting so many kinds of actions. Some studies define PBC as self-efficacy that means actor's perception of difficulty or ease of actions, while others as controllability. However, this confusion dose not imply conceptual contradiction but a double-faced feature of PBC since the performance of actions is related with both self-efficacy and controllability. In other words, these two concepts are discriminated and correlated with each other. Therefore, PBC should be considered as a composite concept consisting of self-efficacy and controllability, Use of IT has been also one of important areas for predictions by PBC. Most of them have been studied by analysis of comparison in prediction power between TAM and TPB or modification of TAM by inclusion of PBC as another belief as like usefulness and ease of use. Interestingly, unlike the other applications in social psychology, it is hard to find such confusion in the concept of PBC in the studies for use of IT. In most of studies, controllability is adapted as PBC since the concept of self-efficacy is included in ease of use explicitly. Based on these discussions, we can suggest perceived use control(PUC) which is defined as perception of control over the performance of using IT and composed of controllability and ease of use as sub-concepts. We suggest a research model explaining acceptance of IT which includes the relationships of PUC with attitude and performance of using IT. For empirical test of our research model, two user groups are selected for surveying questionnaires. In the first group, there are freshmen who take a basic course for Microsoft Excel, and the second group consists of senior students who take a course for analysis of management information by Excel. Most of measurements are adapted ones that have been validated in the other studies, while performance is real score of mid-term in each class. In result, four hypotheses related with PUC are supported statistically with very low significance level. Main contribution of this study is suggestion of PUC through theoretical review of PBC. Specifically, a hierarchical model of PUC are derived from very rigorous studies in the relationship between self-efficacy and controllability with a view of PBC in social psychology. The relationship between PUC and performance is another main contribution.

• Journal of Drive and Control
• /
• v.13 no.4
• /
• pp.59-67
• /
• 2016

This paper proposes a model-prediction-based collision-avoidance algorithm for excavators for which the recursive-least-squares (RLS) estimation of the excavator's rotational inertia is used. To estimate the rotational inertia of the excavator, the RLS estimation with multiple forgetting and two updating rules for the nominal parameter and the forgetting factors was conducted based on the excavator-swing dynamics. The average value of the estimated rotational inertia that is for the minimizing effects of the estimation error was computed using the recursive-average method with forgetting. Based on the swing dynamics, the computed average of the rotational inertia, the damping coefficient for braking, and the excavator's braking angle were predicted, and the predicted braking angle was compared with the detected-object angle for a safety evaluation. The safety level defined in this study consists of the three levels safe, warning, and emergency braking. The analytical rotational-inertia-based performance evaluation of the designed estimation algorithm was conducted using a typical working scenario. The results of the safety evaluation show that the predictive safety-evaluation algorithm of the proposed model can evaluate the safety level of the excavator during its operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1158-1166
• /
• 2013

SAR calculation method following the Mobi-Kids study protocol is analyzed and evaluation method of cumulative RF dose from mobile phones which have been used by a subject of case and control groups is proposed. An SAR database is built by calculating SAR distributions in 4 head models at different ages for representative phone models with the same conducted power. To obtain SAR distribution in a subject's head for a specific commercial phone which had/have been used by him/her, an SAR correction factor using SAR compliance test results is determined. Cumulative dose is calculated by considering mobile phone characteristics and use pattern such as call time and laterality(right and left).

• Korean System Dynamics Review
• /
• v.13 no.3
• /
• pp.47-66
• /
• 2012

This paper aims at investigating and identifying the factor that has led the back and forth relationship between China and the United States since 1989. Previous studies on this subject addressed the issue by taking either of two approaches: one with the micro view that interprets the back and forth relationship in the context of the end of the Cold war, on other hand, with the macro view that interprets the fragile relationship in the context of the rise of China. However, neither of the approaches explains with sufficiency the question at hand. Hence for the inquiry, this article suggests a fresh view by exploring alternative method of using a cognitive map of each nation's leader, Jiangzemin and Bill Clinton. This article provides an empirical analysis through the Selected works of Jiangzemin and the speeches of Bill Clinton in 1998 for the first time in the field of Sino-US relationship studies in Korea. With the results of the cognitive map analysis, we can reach the following four points. Firstly, indicators of the forth relationship between China and the US are: i) the recognition by Bill Clinton on the importance of China's economic growth and; ii) the US's cooperation of science technology with China. Second, the conflict between China and the US results from the discordance of opinions on the matter of human rights and military power. Second, the conflict will inevitably arise on environmental issues around the globe including a global warming. Third, while China has yet to find a legitimate reason to agree upon these issues with the US, the US urges China of its cooperation. Lastly, Both China and the US attach great importance to the alliance with Japan. This implicates that relatively, issues involving Japan take more control in the China-US relationship, than those of Korea Peninsula.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.108-116
• /
• 2014

With the increasing the importance of emotional quality of vehicle, the sound quality of systems with electric motor components has become increasingly important. Electric motors are used for windows, seats, sun roof, mirrors, steering columns, windshield wiper and climate control blowers, etc. In this paper, a study was conducted to identify sound quality factors that contribute to customer's satisfaction and preference of the window lift system. Jury test for subjective evaluation was carried out and sound quality index was developed. Averaged sound pressure level and sharpness were significant factors when glass moves down. Also, maximum loudness at stop section and averaged loudness were significant factor when glass moves up. Next, noise source identification was carried out using beam forming method during glass transferred section and impulsive noise at stop section. Several improvement methods were applied using the source identification result. And finally, the degree of sound quality improvement was judged using sound quality index.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.637-647
• /
• 2010

The Universal Soil Loss Equation (USLE)-based modeling systems have been widely used to simulate soil erosion studies. However the GIS-based USLE modeling systems have limitation in gully erosion evaluation which is one of the most important factor in soil erosion estimation. In this study, the integrated soil erosion evaluation system using with Sediment Assessment Tool for Effective Erosion Control (SATEEC) system, nLS and Unit Stream Power-based Erosion/Deposition (USPED) model was developed to simulate gully erosion. Gully head location using nLS model, USPED for gully erosion, and the SATEEC estimated sheet and rill erosion were evaluated and combined together with the integrated soil erosion evaluation system. This system was applied to the Haean-myeon watershed, annual average sediment-yield considering sheet, rill and gully erosion was simulated as 101,933 ton/year at the study watershed. if the integrated soil erosion evaluation system is calibrated and validated with the measured data, this system could be efficiently used in developing site-specific soil erosion best management system to reduce soil erosion and muddy water inflow into the receiving waterbody.

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.1047-1056
• /
• 2010

In clinical trials, patients should be randomly allocated to treatment and control groups that consider the balance of their prognostic factors(covariates). There are many randomization methods and stratification is popular in Korea. In stratification, patients are divided into strata based on covariates and then the patients are randomly assigned to the arms of each strata. If the number of covariates increases then the number of strata increases rapidly and the results may not be reliable when the patients are inadequate in each strata. To complement this problem Pocock and Simon (1975) suggested a new randomization method that called for minimization focusing on the balance of covariates. In this study, we compare the advantages and disadvantages, the imbalance of covariates, the power of minimization, and other randomization methods by simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.793-798
• /
• 2012

In this paper, dependence of subthreshold current has been analyzed for doping distribution and channel structure of double gate(DG) MOSFET. The charge distribution of Gaussian function validated in previous researches has been used to obtain potential distribution in Poisson equation. Since DGMOSFETs have reduced short channel effects with improvement of current controllability by gate voltages, subthreshold characteristics have been enhanced. The control of current in subthreshold region is very important factor related with power consumption for ultra large scaled integration. The deviation of threshold voltage has been qualitatively analyzed using the changes of subthreshold current for gate voltages. Subthreshold current has been influenced by doping distribution and channel dimension. In this study, the influence of channel length and thickness on current has been analyzed according to intensity and distribution of doping.