• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.160-170
• /
• 2006

If hydraulic pump controlled by mechanical type regulator has more than one control function, the construction of regulator will be very complicated and control performance falls drastically. It is difficult to have more than one control function for hydraulic pump controlled by electronic type hydraulic valve due to the inconsistency of controllers. This paper proposes a multi-function control technique which controls continuously flow, pressure and power by using EPPR(Electronic Proportional Pressure Reducing) valve in swash plate type axial piston pump. Nonlinear mathematical model is developed from the continuity equation for the pressurized control volume and the torque balance for the swash plate motion. To simplify the model we make the linear state equation by differentiating the nonlinear model. A reaction spring is installed in servo cylinder to secure the stability of the control system. We analyze the stability and disturbance by using the state variable model. Finally, we review the control performances of flow, pressure and power by tests using PID controller.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.428-431
• /
• 2016

Power semiconductor devices had been producted with bipolar only processes, but Bipolar-CMOS-DMOS(BCD) processes have been adapted recently to fabricate these devices since most foundry companies have provided BCD processes instead of Bipolar only processes. In this study, Regulator and OP Amp are used as most popular design IPs and BCD processes for the designing are converted from bipolar only processes. Power Switching Sensor(PSS) ICs are designed specifically and fabricated on a silicon chip. The operation results of the packaged chip show the good matching with test results of the simulation.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.318-321
• /
• 2016

As IoT industry are growing fast, The importance of power management system is also being magnified. CMOS High power-supply rejection ratio(PSRR) Low-dropout(LDO) regulator is achieved by the proposed ripple Subtractor, Feed-forward capacitor and OTA in this paper. The LDO is implemented in $0.18-{\mu}m$ CMOS technology. With the proposed structures, in the maximum loading of 40mA, Simulation result achieves PSRR of -73.4dB at 500kHz and PSRR better than -40dB when frequency is below 10MHz with $6.8-{\mu}F$ output capacitor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.758-761
• /
• 2003

We have designed 5 V/500 mA transless type power module by using semiconductor switching technique, key technique for small size of power supply system. The power module is suitable to a small sized electronic system using a single power supply. It is composed of switching circuit using voltage drop type chopper method, control circuit, voltage detect circuit, and constant voltage circuit, and is fabricated to hybrid-IC type. The switching regulator power supply circuit, designed in this study, has satisfied the electrical characteristics of 5 V/500 mA transless type power module.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.459-461
• /
• 1991

This paper proposes a novel AC voltage regulator topology. The output voltage is varied by controlling voltage drop of the transformer which is connected with load in series. The waveform of output voltage is clamped sinusoidal, then harmonic components are remarkably decreased compared with conventional phase control method. The feasibility of proposed topology is verified experimentally.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.1
• /
• pp.14-20
• /
• 1998

The resistive shunting for the fine control of a Direct Energy Transfer(DET) systems is fully developed, but the non-resistive shunting using variable size solar array segments is in progress. This paper presents the spacecraft power control through switching of solar array segments, which uses a fully regulated DET power regulation. This method eliminates a dissipative element and removes the associated design limitations which arise from the dissipative elements for radiating cooling in deep space. The switching shunt regulator comprises the switched Solar Array Shunt(SAS) modules that regulate the solar array power. These SAS modules connect/disconnect the solar array segments to/from the bus according to the loading in the main bus without significant variations in the dissipation level. In this paper, twelve segments are used in the shunting. In order to verify the basis of analysis, the computational result of an analytic loop gain is performed.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.982-986
• /
• 1998

The peak-power-tracking solar array regulator sensing the inductor current is proposed. Since it uses the inductor current as the solar array output power information, the PPT control scheme can be greatly simplified. The charge controlled two-loop scheme is presented to improve the dynamics due to the inductor current sensing. The comparison between the single-voltage loop controlled system and the two-loop controlled system employing the charge control is presented. This paper also contains the simulation results of that comparison.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.364-368
• /
• 1999

This paper suggests switching regulator technique to overcome the drawback of conventional variable linear power supply. Switching regulator technique can eliminate the extremely lossy operation and reduce the size and weight of variable linear power supply and provide nearly constant output power over the majority of output voltage range. The topology of variable switched mode power supply is employed active clamp forward converter with a current doubler rectifier and by using control of variable-frequency together with control of fixed-frequency, output voltage can be controled. Equivalent circuits pertinent to each operational mode of converter are derived, and an experimental 20V, 50A converter was designed and built. The converter operates from an output voltage of zero to 25 V, under 100 kHz switching frequency.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.165-166
• /
• 2014

기존 LED(Light Emitting Diode) 전류 제어용 SSPR(Secondary Side Post Regulator) 스위치를 갖는 구조의 다중출력 컨버터는 LED 정 전류 제어를 위한 별도의 부스트 컨버터 없이 전류제어가 가능하여 원가 및 부피 저감과 효율이 상승하는 장점이 있다. 하지만, 주 출력단(Master)의 피드백을 받아 1차 측 메인 스위치를 제어하게 되어 제어 회로가 복잡하고 주 출력단 부하 변동에 의해 부 출력단(Slave)의 크로스-레귤레이션(Cross-Regulation) 특성이 좋지 않은 단점이 있다. 따라서, 본 논문에서는 기존 SSPR 스위치의 장점을 갖고 주 출력 단의 부하 변동에도 부 출력단의 크로스-레귤레이션 특성이 좋은 새로운 직렬 공진형 LED 구동회로를 제안한다. 최종적으로 제안 회로를 4채널 LED 구동회로에 적용하여 그 실험결과를 바탕으로 제안 회로의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1075-1077
• /
• 2002

This paper describes a three-phase step-down AC voltage regulator using AC chopper and auxiliary transformer which is series connected with main input. It has many advantages such as fast voltage control, high efficiency and low THD. The operation principle and PWM method of the proposed regulator are described. Experimental results show that it can be used as step-down AC voltage regulator for power saving purpose very efficiently.