• 제어로봇시스템학회논문지
• /
• 제9권8호
• /
• pp.647-650
• /
• 2003

PLC (Power Line Communication) is the communication method using the existing power line installed in houses and offices to convert and transmit high frequency communication signal from tens of KHz to tens of MHz, and receive the filtered signal using high frequency filter The advantage of PLC is that PLC uses the existing power line installed in houses and offices so it does not require separate power line. Easy and convenient access using electric outlets is another advantage of PLC. However, PLC has some disadvantages such as limited transmission power, high load interference and noise, variable signal attenuation, characteristic of impedance, and selective possibility of frequency property. We designed the boiler temperature control system unit by using the PLC modem. We can avoid unnecessary heating of separate temperature control unit, and save the cost accordingly control stability of the proposed system is proven through the experiment.

• 산업기술연구
• /
• 제21권A호
• /
• pp.207-211
• /
• 2001

For the power line communication, we studied its characteristic impedance, noise characteristics, loss characteristics and the coupling circuit between the communication MODEM and power lines. As the results of the experiments, we concluded that the power line impedance in a house varied in the wide range because the electric systems generate the current and voltage hamornic noises.

• 한국인터넷방송통신학회논문지
• /
• 제10권3호
• /
• pp.159-166
• /
• 2010

전력선은 이미 전 세계적으로 60% 이상의 주거지에 설치되어 있기 때문에 고속의 전력선 통신을 이용하여 인터넷 액세스를 실현하는 새로운 액세스용 회선을 부설하지 않고 광대역 서비스를 제공할 수 있다. 이러한 이유로 정보화 시대에 인터넷 망이 닿지 않는 Last Mile Solution에 가장 적합한 서비스로서 전력선 통신에 대한 연구가 이루어지고 있다. 하지만, 전력선은 통신 선로가 아니고 전력을 전송하도록 설계되었기 때문에 전자파의 누설로 부근의 무선통신 시스템에 영향을 주게 된다. 본 논문에서는 기존의 무선 통신 서비스와 전력선 통신과의 간섭을 줄이기 위하여 기존의 Notch Filter보다 성능 면에서 우수한 고성능 Notch Filter 알고리즘을 제안하였다. 또한, 고성능 Notch Filter를 적용하여 임베디드 보드를 통한 Notch Filter Emulator를 구현하였다.

• 산업기술연구
• /
• 제19권
• /
• pp.81-89
• /
• 1999

We have developed a power line simulator which is one of the basic tools for the research of the power line communication and its control system. In the developed simulators, we have considered the transfer function of the power line, noises and signal attenuation characteristics. Simulator was made using the matlab tool program. We made the power line modern using the FSK chip(ST7537) and experimentalized to show the efficiency grade of simulator. We have expected that the developed simulators are very useful in the area for the power line communication research and the control system design.

• 한국통신학회논문지
• /
• 제15권6호
• /
• pp.475-484
• /
• 1990

Direct Sequence 스펙트럼 확산방식에서 전원동기를 이용한 전원선 통신장치의 구성을 제안한 것이다. 전원선은 주파수대역폭이 일반적으로 10KHz~450KHz로 제한되어 있고, 특히 동기회로가 복잡해져서 제작가격이 높아지며 또한 시스템 규모가 커지며 다중통신하기가 어렵다. 동기회로를 이루기 위해서 교류전원에 동기하는 전원동기 Clock 발생회로를 제안하고 어드레스 설정기를 두어서 다중통신을 가능하게 하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권9호
• /
• pp.546-553
• /
• 2000

W e have developed a power line simulator which is one of the basic tools for the research of the power line communication and its control system. In the developed simulators, we have considered the transfer function of the power line, noises and signal attenuation characteristics. Simulator was made using the matlab tool program. We made the power line modem using the FSK chip(ST7537) and experimentalized to show the efficiency grade of simulator. We have expected that the developed simulators are very useful in the area for the power line communication research and the control system design.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.889-897
• /
• 2001

Recently, a lot of studies on the power line communication(PLC) are being done by many companies and institutes due to its own merit which can use the power line spread widely as a communication channel. But, there are many serious problems about the harsh and unpredictable characteristics, or noise, signal distortion and attenuation to be overcome for commercialization. In this paper, the power line characteristics as the view point of communication channel are investigated and the technologies of PLC are proposed to control the power of electric machineries by using the combined method of ASK modulation and microprocessor technologies. Also experiments are carried out to ascertain performance in case of applying to electric lights control according to various distancea as an example.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2419-2422
• /
• 2010

현재 선박용 통신 네트워크의 구성은 RS-422, RS-485, CAN, EtherNet 기반의 물리계층으로 NMEA0183, NMEA2000, MiTS(Maritime information Technology Standards) 프로토콜을 지원하도록 설계하고 있다. 특히, 기존의 선박통신은 별도의 전용선을 설치해야하는 단점이 있다. 그러나, 기존의 통신방식과 달리 전력선 통신은 선박내부에서 사용하고 있는 AC220V /DC24V을 그대로 사용하는 장점이 있다. 그러므로, 본 논문에서는 이러한 물리계층을 지원하도록 선박내부의 전력선 통신망을 설계하여 NMEA0183 프로토콜을 지원하는 DC-전력선 통신(DC-PLC : DC-Power Line Communication) 기반의 브릿지를 설계하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.234-239
• /
• 2010

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nanocrystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electromagnetic simulation in this study. Communication speed of 14 Mbps in 600 meter communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.439-440
• /
• 2008

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nano-crystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electro-magnetic simulation in this study. Communication speed of 14 Mbps in 600 m communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.