• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1153-1155
• /
• 2008

Color dimming technology has been developed for high color gamut and aggressive power saving. In our new algorithm, we proposed a new concept of 'color class', with which it is possible to control RGB color luminance effectively and exactly. We reached color gamut of 155% of NTSC 1976 and reduced power consumption under 100 watt for 46 inch LCD.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.681-684
• /
• 2002

In this paper, electrical power subsystem(EPS) simulator for KOMPSAT 2 has been analyzed designed and simulated by object oriented design(OOP) method. To design EPS simulator, the EPS modules, which modeled solar array, solar array regulator, deployment device controller, battery, power control unit, and EPS control unit, are modeled. To verify the EPS simulator, the modules has been simulated. By OOP designs, the EPS simulator is very powerful because this method is applicable to design other EPS simulator.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.300-303
• /
• 2002

Combined generation system of Photovoltaic and wind generation have shortcoming that is different output power according to change of weather. So, the combined generation system is required backup system that such as a storage battery to supply energy, when not enough photovoltaic and wind power source for power supply equally and continually because the energy source is changeable and stable through change of weather as irradiation. temperature, wind speed. wind direction. seasons, etc.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.166-168
• /
• 2010

We investigate the possibility of using adiabatic logic as a countermeasure against differential power analysis (DPA) style attacks to make use of its energy efficiency. Like other dual-rail logics, adiabatic logic exhibits a current dependence on input data, which makes the system vulnerable to DPA. To resolve this issue, we propose a symmetric adiabatic logic in which the discharge paths are symmetric for data-independent parasitic capacitance, and the charges are shared between the output nodes and between the internal nodes, respectively, to prevent the circuit from depending on the previous input data.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.494-497
• /
• 2005

In this paper, harmonic detecting methods for the active power application are investigated. They are RDFT, Kalman Filter, Adaptive predictive filter, Instantaneous reactive power detecting method, Improved adaptive filter detecting method. The 5 harmonic detecting methods are simulated and their characteristics for the active filter application are compared using simulation results.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.612-622
• /
• 2009

The short circuit ratio (SCR) of a given grid is able to show the stability of the system in the case of unwanted elements, such as wind turbulence. This paper presents the simulation of a model of the doubly fed induction generator in the simulation software PSCAD/EMTDC. This model has been used to study flicker during continuous operation and the effect of SCR and grid impedance angle on flicker emission. Simulation results show that compensation of the stator reactive power is an effective method to considerably reduce the flicker levels, irrespective of the grid conditions.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.230-231
• /
• 2013

본 논문은 형광등 안정기를 LED 조명으로 호환하기 위한 전자식 안정기 호환형 LED 구동회로를 제안한다. 제안 방식은 기존의 전자식 안정기인 LCC 공진형 인버터에 트랜스포머와 정류단의 추가해 LLCC의 공진형 컨터버로 동작시키고 해석을 한다. 회로의 특성을 분석하면 트랜스포머의 턴비와 자화 인덕턴스의 설계로 최대 전력점의 가변 및 최대전력, 링크전압의 최적 설계가 가능하다. 이론적 해석의 검증을 위하여 27W급 시작품을 제작하고 전자식 안정기와 동작하여 안정기와의 호환성 검증 및 설계와 동일한 특성을 가지고 있음을 증명하였다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.352-353
• /
• 2013

본 논문에서는 형광등 용 전자식 안정기 호환을 위한 LED 구동회로를 제안한다. 일반적인 전자식 안정기는 기본적으로 부하 전류제어를 하지 않으므로 형광등보다 소모전력이 낮은 LED 구동 시 과도한 전압상승이 발생된다. 따라서 기존의 전자식 안정기 호환용 LED 구동회로의 경우 소자내압을 낮추기 위해 과도한 Damping에 의존하므로 효율이 저조하고 안정기 호환성이 크게 떨어지는 문제점이 있다. 반면 제안된 회로는 별도의 Damping 회로없이 LED 구동회로의 등가 임피던스를 시비율에 따라 가변 함으로써 기존 문제점을 획기적으로 개선할 수 있다. 최종적으로 호환성 및 동작성능에 대한 타당성 검증을 위해 20W급 전자식 안정기에 적용하여 고찰된 실험결과를 제시한다.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.256-259
• /
• 2001

An increase of pulsed power demand and load variation produce bad effect to power system. This causes power factor decrease. This paper proposes the excitation of the secondary side of wound rotor induction machine as one of harmonic compensation systems. In this paper, a harmonic compensation scheme based on stator flux-oriented vector control is proposed. By using the flux-oriented vector control, a voltage source PWM(Pulse Width Modulation) control scheme can be applied with fast dynamic response time. The designed control scheme is verified through simulation.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.391-392
• /
• 2015

본 논문에서는 전자식 및 자기식 안정기 동시 호환 가능한 LED 구동회로를 제안한다. 제안 LED 구동회로는 여러 종류의 안정기가 접속 되었을 때, 어떤 안정기가 접속되었는지 자동으로 감지하여 안정기의 동작 특성을 고려하여 선정된 동작 듀티비로 제안회로를 동작시킴으로써 기존의 형광등 구동을 위한 안정기를 입력 시스템으로 사용함으로써 안정기의 철거 및 교체 없이 모든 안정기에 호환이 가능하다. 제안 LED 구동회로의 타당성 검증을 위해 15W급 시작품을 제작하고, 전자식 및 자기식 안정기와의 호환성 실험결과를 바탕으로 제안방식의 타당성을 검증한다.