• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.76-90
• /
• 2006

Sensor network consists of a large number of sensor nodes that are densely deployed either inside the phenomenon or very close to it. The life time of each node in the sensor network significantly affects the life time of whole sensor network. A node which drained out its battery may incur the partition of whole network in some network topology The life time of each node depends on the battery capacity of each node. Therefore if all sensor nodes in the network live evenly long, the life time of the network will be longer. In this paper, we propose Cluster-Based Power-Efficient Routing (CBPER) Protocol which provides scalable and efficient data delivery to multiple mobile sinks. Previous r(luting protocols, such as Directed Diffusion and TTDD, need to flood many control packets to support multiple mobile sinks and many sources, causing nodes to consume their battery. In CBPER, we use the fact that sensor nodes are stationary and location-aware to construct and maintain the permanent grid structure, which makes nodes live longer by reducing the number of the flooding control packets. We have evaluated CBPER performance with TTDD. Our results show that CBPER is more power-efficient routing protocol than TTDD.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.4
• /
• pp.41-49
• /
• 2008

Sensor networks are often deployed in unattended environments, thus leaving these networks vulnerable to false data injection attacks in which an adversary injects forged reports into the network through compromised nodes. Such attacks by compromised sensors can cause not only false alarms but also the depletion of the finite amount of energy in a battery powered network. In order to reduce damage from these attacks, several security solutions have been proposed. Researchers have also proposed some techniques to increase the energy-efficiency of such security solutions. In this paper, we propose a CH(Cluster Header) selection algorithm to choose low power delivery method in sensor networks. The CNP(Contract Net Protocol), which is an approach to solve distribution problems, is applied to choose CHs for event sensing. As a result of employing CNP, the proposed method can prevent dropping of sensing reports with an insufficient number of message authentication codes during the forwarding process, and is efficient in terms of energy saving.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1223-1247
• /
• 2012

The need for securing Wireless Sensor Networks (WSNs) is essential especially in mission critical fields such as military and medical applications. Security techniques that are used to secure any network depend on the security requirements that should be achieved to protect the network from different types of attacks. Furthermore, the characteristics of wireless networks should be taken into consideration when applying security techniques to these networks. In this paper, energy efficient Security Model for Tree-based Routing protocols (SMTR) is proposed. In SMTR, different attacks that could face any tree-based routing protocol in WSNs are studied to design a security reference model that achieves authentication and data integrity using either Message Authentication Code (MAC) or Digital Signature (DS) techniques. The SMTR communication and processing costs are mathematically analyzed. Moreover, SMTR evaluation is performed by firstly, evaluating several MAC and DS techniques by applying them to tree-based routing protocol and assess their efficiency in terms of their power requirements. Secondly, the results of this assessment are utilized to evaluate SMTR phases in terms of energy saving, packet delivery success ratio and network life time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.12
• /
• pp.2563-2567
• /
• 2011

Advances in smart sensors, embedded systems, low-power design, ad-hoc networks and MEMS have allowed the development of low-cost small sensor nodes with computation and wireless communication capabilities that can form distributed wireless sensor networks. Time information and time synchronization are fundamental building blocks in wireless sensor networks since many sensor network applications need time information for object tracking, consistent state updates, duplicate detection and temporal order delivery. Various time synchronization protocols have been proposed for sensor networks because of the characteristics of sensor networks which have limited computing power and resources. However, none of these protocols have been designed with time representation scheme in mind. Global time format such as UTC TOD (Universal Time Coordinated, Time Of Day) is very useful in sensor network applications. In this paper we propose network time protocol extension for global time presentation in wireless sensor networks.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1066-1070
• /
• 2010

In wireless network, energy efficiency is an important design consideration for continuous multimedia streaming service. This paper proposes a new streaming system, called BACASS (Buffer-Aware and Content-Aware Streaming System) that working on the 802.11e U-APSD (Unscheduled Automatic Power Save). The BACASS leads the DP (Doze Period) of U-APSD for improving energy efficiency by utilizing the PSNR based on content-aware and client buffer occupancy that is hinged on a network-aware streaming system using SVC. The simulation results demonstrate the effectiveness of the proposed streaming system.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1601_1602
• /
• 2009

본 논문은 SSN(Simultaneous Switching Noise) 이 유전체를 통해 다른 시스템에 유기되는 것을 막기 위한 방법인 EBG(Electromagnetic Band-Gap)에 관한 연구이다. 이에 대한 EBG 구조를 설계하기 위해 PDN(Power Delivery Network)에 주기적인 패턴을 삽입한다. 패키지에 EBG 구조를 적용하기 위해 인쇄 회로기판 범위에서 연구되었던 구조를 변형 및 개조하여 EBG 구조가 내포하고 있는 필터의 차단 주파수의 범위를 넓히며 차단 시작 주파수를 1GHz 아래로 낮추는 소형화 방법을 모색한다. 이 연구에서 실시할 EBG 구조에 대한 간단한 고찰과 인쇄 회로 기판에 적합한 AI-EBG(Alternating impedance Electromagnetic Band-Gap) 구조를 이용한 EBG 의 소형화에 대해 언급하고, 소형화를 위한 3-D EBG 의 설계구조에 대해 설명한다. 그리고 저주파에서 차단특성을 높이기 위한 방법으로 3-D EBG를 사용하고 AI-EBG와 비교하여 차단특성의 변화를 Full-wave 시뮬레이션과 측정으로서 비교한다.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.32-37
• /
• 2022

As semiconductors become finer, equipment must perform precise and accurate processes to achieve the desired wafer fabrication requirement. Radio frequency power delivery system in plasma system plays a critical role to generate the plasma, and the role of impedance matching unit is critical to terminate the reflected radio frequency power by modifying the impedance of the matching network in the plasma equipment. Impedance matching unit contains one fixed inductor and two variable vacuum capacitors whose positions are controlled two step motors. Controlling the amount of vacuum variable capacitor should be made as soon as possible when the mismatched impedance is detected. In this paper, we present the impedance matching algorithm using the phase sensor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.878-884
• /
• 2013

This paper presents a transmission power control MAC protocol that allows terminals to vary transmit power level on data frame basis in ad hoc network. Unlike the IEEE 802.11 approach, we do not use the RTS/CTS packets to silence the neighboring nodes. Instead, channel gain and distance information between transmitter and receiver terminal are inserted in the RTS/CTS packets. These informations are used to dynamically bound the transmission power. Simulation results indicate that, compared to the GMAC, the proposed MAC protocol achieves a increase in the average frame delivery ratio and a decrease in the average frame delay.

• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.742-752
• /
• 2015

The communications through the power lines are called as the PLC and this is a common name for the communication modes for the information delivery. This technology transmits the data through the power lines on which the information is stored with the form of high frequency signal. The characteristic of the frequency signal is that the signal can be separated from the power line through exclusive power line modem and transmitted to the terminal devices. In this paper, 'In-home Headcount' checking algorithm using Wi-Fi and taking above mentioned advantages is proposed, and the basic Technology for such Solitary Senior Citizen's Lonely Death monitoring system has been designed and implemented. The comparative analysis has been conducted in this paper with the test-operated and test bed-completed 'Hyosimi 119 Safety-Welfare System' which is still being tested since 2008. With the 'In-home Headcount Checking Algorithm', Wi-Fi connection/disconnection status and SSIDs of relevant Wi-Fis will be checked. We expect that our proposed method will become as the basic Technology which can prevent lonely deaths of elderly people living alone. Since the PLC technology can be normally implement all the functions used on internet anticipate that the technology could be applied to many areas to construct a new form of communication network.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.320-330
• /
• 2012

In this paper, we investigate the power integrity of grid structures for power and ground distribution on printed circuit board (PCB). We propose the 2D transmission line method (TLM)-based model for efficient frequency-dependent impedance characterization and PCB-package-integrated circuit (IC) co-simulation. The model includes an equivalent circuit model of fringing capacitance and probing ports. The accuracy of the proposed grid model is verified with test structure measurements and 3D electromagnetic (EM) simulations. If the grid structures replace the plane structures in PCBs, they should provide effective shielding of the electromagnetic interference in mobile systems. An analytical model to predict the shielding effectiveness (SE) of the grid structures is proposed and verified with EM simulations.