• 제목/요약/키워드: Power Constraint

검색결과 500건 처리시간 0.024초

대규모 풍력발전 계통 연계시 주요 송전망 제약예측시스템 개발에 관한 연구 (A Study on the Development of Critical Transmission Operating Constraint Prediction (CTOCP) System With High Wind Power Penetration)

  • 허진
    • 조명전기설비학회논문지
    • /
    • 제29권1호
    • /
    • pp.86-93
    • /
    • 2015
  • Globally, wind power development is experiencing dramatic growth and wind power penetration levels are increasing. Wind generation is highly variable in time and space and it doesn't guarantee the system reliability and secure system operation. As wind power capacity becomes a significant portion of total generation capacity, the reliability assessment for wind power are therefore needed. At present, this operational reliability assessment is focusing on a generation adequacy perspective and does not consider transmission reliability issues. In this paper, we propose the critical transmission operating constraint prediction(CTOCP) system with high wind power penetration to enhance transmission reliability.

Crack-tip constraint analysis of two collinear cracks under creep condition

  • Jiao, Guang-Chen;Wang, Wei-Zhe;Jiang, Pu-Ning
    • Structural Engineering and Mechanics
    • /
    • 제43권3호
    • /
    • pp.311-320
    • /
    • 2012
  • The higher-order asymptotic C(t) - $A_2(t)$ approach was employed to investigate the crack-tip stress of two collinear cracks in a power-law creeping material under the plane strain conditions. A comprehensive calculation was made of the single crack, collinear crack model with S/a = 0.4 and 0.8, by using the C(t) - $A_2(t)$ approach, HRR-type field and the finite element analysis; the latter two methods were used to check the constraint significance and the calculation accuracy of the C(t) - $A_2(t)$ approach, respectively. With increasing the creep time, the constraint $A_2$ was exponentially increased in the small-scale creep stage, while no discernible dependency of the constraint $A_2$ on the creep time was found at the extensive creep state. In addition, the creep time and the mechanical loads have no distinct influence on accuracy of the results obtained from the higher-order asymptotic C(t) - $A_2(t)$ approach. In comparison with the HRR-type field, the higher-order asymptotic C(t) - $A_2(t)$ solution matches well with the finite element results for the collinear crack model.

A Conflict Detection Method Based on Constraint Satisfaction in Collaborative Design

  • Yang, Kangkang;Wu, Shijing;Zhao, Wenqiang;Zhou, Lu
    • Journal of Computing Science and Engineering
    • /
    • 제9권2호
    • /
    • pp.98-107
    • /
    • 2015
  • Hierarchical constraints and constraint satisfaction were analyzed in order to solve the problem of conflict detection in collaborative design. The constraints were divided into two sets: one set consisted of known constraints and the other of unknown constraints. The constraints of the two sets were detected with corresponding methods. The set of the known constraints was detected using an interval propagation algorithm, a back propagation (BP) neural network was proposed to detect the set with the unknown constraints. An immune algorithm (IA) was utilized to optimize the weights and the thresholds of the BP neural network, and the steps were designed for the optimization process. The results of the simulation indicated that the BP neural network that was optimized by IA has a better performance in terms of convergent speed and global searching ability than a genetic algorithm. The constraints were described using the eXtensible Markup Language (XML) for computers to be able to automatically recognize and establish the constraint network. The implementation of the conflict detection system was designed based on constraint satisfaction. A wind planetary gear train is taken as an example of collaborative design with a conflict detection system.

Power Allocation Schemes For Downlink Cognitive Radio Networks With Opportunistic Sub-channel Access

  • Xu, Ding;Feng, Zhiyong;Zhang, Ping
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제6권7호
    • /
    • pp.1777-1791
    • /
    • 2012
  • This paper considers a downlink cognitive radio (CR) network where one secondary user (SU) and one primary user (PU) share the same base station (BS). The spectrum of interest is divided into a set of independent, orthogonal subchannels. The communication of the PU is of high priority and the quality of service (QoS) is guaranteed by the minimum rate constraint. On the other hand, the communication of the SU is of low priority and the SU opportunistically accesses the subchannels that were previously discarded by the PU during power allocation. The BS assigns fractions ?? and 1 ?? of the total available transmit power to the PU and the SU respectively. Two power allocation schemes with opportunistic subchannel access are proposed, in which the optimal values of ??'s are also obtained. The objective of one scheme is to maximize the rate of the SU, and the objective of the other scheme is to maximize the sum rate of the SU and the PU, both under the PU minimum rate constraint and the total transmit power constraint. Extensive simulation results are obtained to verify the effectiveness of the proposed schemes.

멀티코드 CDMA 시스템에서 비선형 왜곡에 대처하는 PAPR 저감 기법 (PAPR Reduction Method for the Nonlinear Distortion in the Multicode CDMA System)

  • 김상우;김남일;김선애;서재원;유흥균
    • 한국전자파학회논문지
    • /
    • 제16권12호
    • /
    • pp.1171-1178
    • /
    • 2005
  • Multi-code code division multiple access(MC-CDMA) 시스템은 다수의 코드 사용으로 인한 용량의 증가를 통해 다양한 속도, 다양한 품질의 서비스를 제공할 수 있다는 장점을 갖는다 그러나, 여러 개의 코드들이 합쳐지면서 PAPR(Peak to Average Power Ratio)이 크게 증가되므로 비선형 왜곡에 의한 시스템 성능이 크게 저하되고, 이를 위해 HPA(High Power Amplifier)에서 많은 양의 back-off를 해야 하므로 큰 전력 손실이 나타난다. 본 논문에서는 들어오는 정보 데이터에 상응하는, 즉 입력 데이터의 상관 관계에 의한 constraint code의 삽입함으로써 PAPR을 효율적으로 낮출 수 있는 방법을 제안한다. PAPR 저감 효과는 사용된 constraint code의 길이와 index에 의존하며, PAPR 저감 효과와 constraint code의 길이 사이에 trade-off가 존재한다. HPA 및 AWGN 채널을 고려한 시뮬레이션 결과에서, 1) Input back-off 없이 가능한 모든 constraint code를 사용해 신호를 선택한 경우와 2) 약간의 input back-off와 몇 가지 constraint code만을 이용해 신호를 선택한 경우에서, BER성능이 선형 HPA를 사용한 OFDM의 성능과 거의 같게 나타남을 확인할 수 있다.

Power Allocation and Capacity Analysis of Secondary User in Heterogeneous Spectrum Sharing Systems

  • Lim, Sungmook;Ko, Kyunbyoung
    • International Journal of Contents
    • /
    • 제12권1호
    • /
    • pp.70-75
    • /
    • 2016
  • In this paper, we considered heterogeneous spectrum sharing system where the number of subcarriers of the primary user (PU) was twice as much as that of the secondary user (SU). In this case, due to non-orthogonality and inter-carrier interference (ICI) from SU to PU, it is difficult to satisfy the interference constraint of PU. In order to mitigate ICI and satisfy the interference constraint, we proposed a new transmission scheme of the SU with power allocation scheme. The proposed scheme will only generate subcarrier-by-subcarrier interference. Therefore, it can easily satisfy the interference constraint of the PR and enhance the capacity of the SU. In addition, we derived the ergodic capacity of the SU. Based on numerical results, we confirmed that the proposed schemes could guarantee SU with a reliable capacity while satisfying the interference constraint of the PU. In addition, the derived capacity well matched the numerical results.

Overshoot에 구속조건을 갖는 원자여의 시간최적제어 (Time Optimal Control of Nuclear Reactor with Constraint on Power Overshoot)

  • 곽은호
    • 대한전자공학회논문지
    • /
    • 제12권4호
    • /
    • pp.15-20
    • /
    • 1975
  • 원자로의 출력을 초기상태에서 요구표적 상태로 증가시켜 주는 과도기간중 출력의 Overshoot가 생기는데 이 Overshoot에 구속조건을 두는 것은 원자로를 제각함에 있어 안전사 매우 중요하다. 따라서 출력이 요구 최대허용 구동영역을 넘지 않도록 반응도를 조절하면서 초기값(no, co)에서 최종같인 요구값(2no,2co) 또는 (1. 5no,1.5co)로 출력을 증가시키는데 최대원리(Maximum principle)를 적용하였다. 그리고 이때의 스위청점, 스위청시간 및 최적제각 반응도를 구하였다. The power overshoot is rises in the output during the transient period when the output of nuclear reactor is increased from the initial state to the desired target state and certain amount of constraint on power level is of primary importance for safety control of nuclear reactor. Therefore, the maximum principle is applied to this process control in transfering its power from the initial state(no, co) to the final target state(2no, 2co or 1.5no, 1.5co), adjusting the reactivity so that its overshoot is limited within the allowable constraint required. In this case, the switching points, switching times, optimal lima and optimal control reactivity are calculated.

  • PDF

시간 제약 조건 하에서 저전력을 고려한 CLB구조의 CPLD 기술 매핑 알고리즘 (CLB-Based CPLD Technology Mapping Algorithm for Power Minimization under Time Constraint)

  • 김재진;김희석
    • 대한전자공학회논문지SD
    • /
    • 제39권8호
    • /
    • pp.84-91
    • /
    • 2002
  • In this paper, we proposed a CLB-based CPLD technology mapping algorithm for power minimization under time constraint in combinational circuit. The main idea of our algorithm is to exploit the "cut enumeration and feasible cluster" technique to generate possible mapping solutions for the sub-circuit rooted at each node. In our technology mapping algorithm conducted a low power by calculating TD and EP of each node and decomposing them on the circuit composed of DAG. It also takes the number of input, output, and OR-term into account on condition that mapping can be done up to the base of CLB, and so it generates the feasible clusters to meet the condition of time constraint. Of the feasible clusters, we should first be mapping the one that h3s the least output for technology mapping of power minimization and choose to map the other to meet the condition of time constraint afterwards. To demonstrate the efficiency of our approach, we applied our algorithm to MCNC benchmarks and compared the results with those of the exiting algorithms. The experimental results show that our approach is shown a decrease of 46.79% compared with DDMAP and that of 24.38% for TEMPLA in the power consumption.

On the Capacities of Spectrum-Sharing Systems with Transmit Diversity

  • Asaduzzaman, Asaduzzaman;Kong, Hyung-Yun
    • Journal of electromagnetic engineering and science
    • /
    • 제10권3호
    • /
    • pp.99-103
    • /
    • 2010
  • Motivated by recent works on spectrum-sharing systems, this paper investigates the effects of transmit diversity on the peak interference power limited cognitive radio(CR) networks. In particular, we derive the ergodic and outage capacities of a spectrum-sharing system with multiple transmit-antennas. To derive the capacities, peak interference power constraint is imposed to protect the primary receiver. In a CR transmitter and receiver pair with multiple antennas at the transmitter side, the allowable transmit power is distributed over the transmit-antennas to achieve transmit diversity at the receiver. We investigate the effect of this power distribution when a peak interference power constraint is imposed to protect the primary receiver. We show that the transmit diversity does not improve the ergodic capacity compared to the single-antenna system. On the other hand, the transmit diversity significantly improves the outage capacity. For example, two transmit-antennas improve the outage capacity 10 times compared to the single-antenna with a 0 dB interference constraint.

시간제약 조건하에서 재사용 모듈 설계를 통한 CPLD 저전력 기술 매핑 (CPLD Low Power Technology Mapping for Reuse Module Design under the Time Constraint)

  • 강경식
    • 디지털산업정보학회논문지
    • /
    • 제4권3호
    • /
    • pp.77-83
    • /
    • 2008
  • In this paper, CPLD low power technology mapping for reuse module design under the time constraint is proposed. Traditional high-level synthesis do not allow reuse of complex, realistic datapath component during the task of scheduling. On the other hand, the proposed algorithm is able to approach a productivity of the design the low power to reuse which given a library of user-defined datapath component and to share of resource sharing on the switching activity in a shared resource. Also, we are obtainable the optimal the scheduling result in experimental results of our using chaining and multi-cycling in the scheduling techniques. Low power circuit make using CPLD technology mapping algorithm for selection reuse module by scheduling.