• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.641-647
• /
• 2011

This paper describes a design and fabrication of SDLVA. The SDLVA operates 0.5~2.0 GHz with -70~0 dBm dynamic range. The SDLVA is consisted of 5-stage RF block, 2-stage detector block and summation circuit using clamping op-amp to improve video linearity. The result of measure, SDLVA of RF path has over 73 dB small-signal gain and 10.1~12.2 dBm saturation power. The video path has 25 mV/ dB${\pm}$1.0 mV and under ${\pm}$1.5 dB video linearity.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.166-170
• /
• 1997

A Single phase induction motor is the predominant fractional horsepower power rated, extensively used in domestic and industrial application. For example, these motors provide the motive power to washing machines, fans, refrigerators, etc. In this paper, single phase induction motor input current was detected by a small current transformer and determined TRIAC gate signal by using op-amp analog circuit. The soft-start strategy is based on limited auxiliary current angle during starting period in the closed-loop control. The Simulation and experimental result show the motor's starting characteristics of the proposal starting system and are compared with centrifugal switch starting motor.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.866-869
• /
• 1991

The Remote Meter Reading System has a briefly wireless method, telephone line method and power line method. Our System is composed of Power Amp., Optical Sensing, Digital, Analog, Logic and Load Control Parts. We adapted PSK modulation method by Power Line Carrier in Communication System.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1529-1533
• /
• 2005

In this paper designed available pre-amplifier to Intrabroadband power amplifier. Designed pre-amplifier used WJ company's AMI which frequency characteristic and noise characteristic are superior. Designed to have superior VSWR characteristic and frequency characteristic covering broadband of 100MHz ${\~}$ 3GHz using feedback. Designed ye-amp broadband special qualify such as EMC measurement equipment roll important position do to utilize to power amplifier of equipment that how consider.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1855-1860
• /
• 2010

Electric vehicles have reached a new level of development with introductions by Chrysler, Ford, Honda and Toyota. Today's charging technology includes conductive and inductive charging systems. There are three standardized charging levels: Level 1: charging can be done from a standard, grounded AC 120V, 3-prong outlet available in all homes; Level 2: charging is at AC 240V, 40 amp charging station with special consumer features to make it easy and convenient to plug in and charge EVs at home or at an EV charging station; Level 3: a high-powered charging "fast charge" technology currently under development that will provide a charge in less than 15 minutes. The incoming AC power is converted to DC and stored in the vehicle's batteries. In this paper, we investigated the application of urban railway DC electric power for electric car charging system.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1511-1512
• /
• 2006

In this paper, we measured PD signals from artificial surface defects and corona discharges under laboratory circumstances like the fields using both HFCT-sensor and UHF-sensor for MV grade XLPE cable with AMP, spectrum analyzer and oscilloscope. Also, detected signals were analyzed via PRPDA system in this paper. As a result, in this case of HFCT-sensor, the amount of background noise are larger than as compared to UHF-sensor. There is needed some hardware or software or software algorithm removing background noise effectively for diagnosis the underground power transmission cable in the case of HFCT-sensor.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.34-43
• /
• 2019

An improved half-bridge LLC converter with a magamp auxiliary post-regulator is proposed in this paper. The function of the magamp is bypassed when the converter works within the low input-voltage range. Meanwhile, it operates as an auxiliary post-regulator when the input voltage is high. By changing the blocking time of the magamp, the dc gain of the converter can be extended. Hence, the input voltage range of the converter is extended. The realization of proposed topology does not require a complicated circuit. The controller of the magamp can be easily implemented using only passive components, transistors and an OP amp. The generalized operational principle is analyzed and the design criterion for the magamp is presented. Finally, a 25V output, 400W experimental prototype was built and tested for a 160-300V input-voltage range to verify the feasibility of the proposed method.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2831-2834
• /
• 2003

본 논문에서는 PWM 방식을 이용한 THERMO-CON 제어 회로를 제안하였다. 제안한 회로는 정전압을 형성하기 위한 레귤레이터, 신호를 처리하기 위한 op-amp, 삼각파를 만들기 위한 OSC, 그리고 부하의 상태를 감지하기 위한 AMC 와 ISC 로 구성된다. 테스트 결과 서지 전압인가 시 PWM 방식으로 동작하여 회로의 P/sub D/(Power Dissipation)을 줄여 소자의 파괴를 막고 중부하 시(여러 개의 릴레이 구동 시) PWM 동작을 하여 소자의 파괴를 막는다는 것을 확인하였으며, 출력 쇼트 시 쇼트보호회로에 의해 출력 트랜지스터의 파괴를 막는다는 것을 확인하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.33-35
• /
• 1984

A new type single beam photoacoustic spectrometer suitable for measuring optical absorption of condensed powder matter with the automatic calibration capability of a source power spectrum is introduced. The signal processing until of this spectrometer consists of a photoacoustic cell a lock-in amp., a switching circuit and a personal computer. The measured optical absorption spectra of a few material by this method are good agreement with the results obtained by the double-beam photoacoustic spectrometer.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.206-211
• /
• 2005

The hearing aids specific operational amplifier described in this paper is a single-supply, low voltage CMOS amplifier. It works on 1.3V single-supply and gets a gain of 82dB. The 0.18${\mu}m$ CMOS process was chosen to reduce the driven voltage as well as the power dissipation.