• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.212-214
• /
• 2020

리튬이온 배터리를 고온의 환경에서 장시간 운용함에 따라 배터리 내부 물질의 변형 및 특성 변화가 발생하여 안전성의 문제가 발생하게 된다. 배터리의 안전성을 향상하기 위해 배터리의 고장 및 이상 상태를 진단 및 탐지하는 기법들의 연구가 진행되고 있다. 본 논문에서는 배터리의 이상 상황을 모사하기 위해 열폭주의 한 가지 방법인 고온의 환경에서 배터리의 특성 변화를 전기화학적 임피던스 분광법을 통해 분석하였으며, 등가회로 모델의 특성 인자를 활용하여 이상 상황을 탐지할 수 있는 이동 평균 추세선 기반의 이상 탐지 기법을 제안하며, 열폭주가 발생한 데이터를 통해 이상 탐지 기법을 검증한다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1863-1864
• /
• 2008

한국전력거래소에서 운영중인 EMS(Energy Management System)와 MOS(Market Operation System) 설비는 각각 Alstom사와 ABB사에 의해 우리나라의 전력계통 특성에 맞게 제작되어 공급된 전력계통과 전력시장의 운영을 자동화한 시스템이다. EMS는 전력계통 감시와 효율적인 운영을 위해 전력계통을 모델링한 데이터를 활용하며, MOS는 실시간 급전계획 수립을 위한 기반자료로 전력계통을 모델링한 데이터를 사용하게 된다. 그러나, 대한민국 전력산업의 핵심인 두 시스템은 시스템 설계 방식 및 DB 구조가 상이하여 전력계통의 신.증설 및 변경 시 동일한 데이터를 양 시스템에 각각 따로 구축, 운영해야하는 실정이다. 이에 따라 DB작업을 위한 자료 준비부터 입력, 수정, 검증 등 모든 과정에 중복된 관리가 이루어지고 있다. 중복 관리는 양 시스템 간 DB의 주요 데이터 특성 및 명칭이 상이하여 일률적인 관리가 어렵고, 시스템별 특성 및 운영노하우가 없이는 인적실수에 의한 입력오류 개연성이 폭넓게 존재하는 등 현 상황에서 피할 수 없는 현실이었다. EMS와 MOS 시스템 중 최소한 개의 시스템을 전면 재구축하지 않으면 해결되지 않을 본 문제를 해소하기 위하여 전력거래소는 특정 시스템에 구축된 데이터를 변환알고리즘을 통해 나머지 하나의 시스템에 자동 구축할 수 있는 시스템을 개발하여 활용하고자 한다. 이것이 바로 EMS에 입력되어 정확성이 검증된 계통데이터를 추출하여 MOS의 데이터 형식으로 변환하고, 변환된 데이터를 MOS시스템에 자동으로 입력할 수 있는 MOS/EMS 데이터 자동변환시스템이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.942-946
• /
• 2009

A scan order converter has to be placed before the JPEG encoder to provide $8{\times}8$ blocks from the pixels in raster scan order. Recently a hardware architecture has been proposed to implement a scan converter based on the single line memory. Since both read and write accesses happen at each cycle, however, the largest part of the entire power budget is occupied by the SRAM itself. In this paper, the data packing and unpacking procedure is inserted in the processing chain, such that the access frequency to the SRAM is reduced to 1/8 by adopting a packed larger data unit. The simulation results show that the resultant power consumption is reduced down to 16% for the SXGA resolution.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.297-303
• /
• 2016

This paper introduces auxiliary power supply systems (APS) for railroad applications and proposes a new power conversion structure for highly-efficient and lightweight APS systems. The proposed structure focuses on an improvement of the power density in APS. It eliminates unnecessary power conversion stages in the conventional APS structure by modulating the dc/dc converter circuit and the structure of the system. The dc/dc converter circuit used in the proposed structure is based on a multi-level half-bridge converter, a widely used topology in railroad APS applications; a flying capacitor is newly added to the conventional circuit. The added capacitor is used not only to enhance the soft switching condition of the switches, but also so that the new pantograph will have a side voltage source of a battery charger in the APS structure. Since the battery charger uses the pantograph side voltage source in the proposed structure, rather than using the output of the main dc/dc converter in the conventional structure, the size and efficiency of the main dc/dc converter are reduced and increased, respectively. To verify the effectiveness of the proposed structure, simulation results will be presented with metropolitan transit APS specifications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.661-668
• /
• 2012

A coaxial-cable impedance transformer that can be used in high power and wideband frequency range is an arbitrary impedance transformation ratio by an additional coaxial cable. The coaxial-cable impedance transformer to be 50-${\Omega}$ to 25-${\Omega}$ impedance transformation ratio is easily operated an wideband power divider by connecting two 50-${\Omega}$ lines at 25-${\Omega}$ impedance point. This wideband power divider has a poor output matching characteristic and a poor isolation characteristic between two output ports. In this paper, it proposes a coaxial-cable power divider to be a good output matching and isolation characteristics as it uses the singly terminated filter design theory. The odd-mode operation characteristic of the suggested power divider to use singly terminated low pass filter coefficient due to matching order and ripple value is examined by ADS program. And, it fabricates and measures the operation characteristic of 2-way power divider with 2nd-order and 4th-order matching circuit.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1280-1287
• /
• 2019

Grid-connected bidirectional PCS(Power Conditioning System) technology is a technology for implementing distributed renewable energy smart grid. And it is always charged by using power collected from solar modules and commercial grid power among vast smart grid systems, and stored when needed.It is a hybrid energy storage device that allows power to be released into the low voltage system. To this end, a PV input power converter with MPPT function, a bidirectional power converter for battery charging and discharging, and a DC Link input are output to a 3 phase 380V AC system, and if nessary, the bidirectional DC/DC converter We designed and developed a PCS with three power converter structures composed of inverters that perform battery charging. Currently, this system is applied to the site of Jeju, which is vulnerable to power outages and fire accidents.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.37-42
• /
• 2000

In this paper, The high-speed, low-Power analog-to-digital conversion structure is proposed using the pipelined comparator away for high-speed conversion rate and the successive- approximation structure for low-power consumption. This structure is the successive-approximation structure using pipelined comparator array to change the reference voltage during the holding time. An 8-bit 10MS/s analog-to-digital converter is designed using 0.8${\mu}{\textrm}{m}$ CMOS technology. The INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 41㏈ at a sampling rate of 10MHz with 100KHz sine input signal. The Power consumption is 4.14㎽ at 10MS/s.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.692-701
• /
• 2003

In this paper, a new logic transformation method to consider both low power consumption and high testability is proposed. We search the CFF(Compact Fanout Free) that has low probability of being observable at the primary outputs. Under the condition that the CFF is unobservable at all primary outputs, the switching operations in it can be removed by adding redundant connections into it. The testability of the transformed circuit generally tends to reduce. In our method, however, the inserted redundant connections operate as test points in the test mode and can improve not only the controllability but also the observability of the CFF. The transformed circuit consumes less power in the normal mode and also has higher testability in the test mode. To show the efficiency of the proposed logic transformation method, we perform some experiments on the MCNC benchmark test circuits. The results show that the power consumption of the transformed circuit is reduced by 13% maximally and the fault coverage of the transformed circuit is increased.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.41-46
• /
• 2023

Design of W-band TE10 to TEM mode converter for radial power combiner is proposed in this paper. The proposed structure is used with generally available pin to realize TEM mode and is designed to convert TE10 to TEM mode gradually using 2-step impedance transformer and back short. The pin of proposed mode converter is well bonded to the housing so that environment conditions such as vibration or shock are not affected. The proposed mode converter, in a back-to-back configuration, has less than 1.55 dB insertion loss and more than 10 dB return loss from 92.5 GHz to 97.7 GHz. Proposed converter is expected compact radar and various applications requiring for high power and stable environment conditions.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.138-144
• /
• 2006

In this paper, dual mode FET mixer for WiBro and wireless LAN(WLAN) applications has been designed in the form of dual gate FET mixer by using the cascode structure of two single gate pHEMTs. The designed dual gate mixer has been optimized to have variable conversion gain for WiBro and WLAN applications in order to save dc power consumption. The LO to RF isolation of the designed mixer is more than 20dB from 2.3GHz to 2.5GHz band. With the LO power of 0dBm and RF power of -50dBm, the mixer shows 15dB conversion gain. When RF power increases from -50dBm to -20dBm, the conversion gain decreases to -2dB from 15dB with bias change. The variable conversion gain has several advantages. It can reduce the high dynamic range requirement of AGC burden at IF stage. Also, it can save the dc power dissipation of mixer up to 90%.