• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.2
• /
• pp.69-76
• /
• 2017

In the Korea, 80 percent of livestock manure were converted into compost and used as organic fertilizers. The livestock manure compost has two types of powder and pellet type (ID= 5~10 mm). The aim of this study was to investigate the properties of two types of cow manure compost pellet (cylinder and sphere type). Nitrogen concentrations of cylinder type and sphere type of compost pellets were 1.23 and 1.24%, respectively. There were similar with nitrogen concentration of cylinder and sphere types of compost pellets. As a result of analyzing the effect of granulation processing, it was found that the moisture content of the raw material was the most influential factor in the granulation processing in both of the processing types of the screw pressing method and the rotating cylinder method. When the cylinder and sphere types of compost pellets were dry to 20% of moisture content, the specific gravities of these compost pellets were 1.38 and 1.13, respectively. The compressive strength of cylinder type pellet and sphere type pellet were 27.6 and $11.3kg/cm^2$, respectively.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.55-61
• /
• 2011

$BaCo_{0.7}Fe_{0.22}Nb_{0.08}O_{3-{\delta}}$ oxide was synthesized by solid state reaction method. Dense ceramic membrane was prepared using as-prepared powder by pressing and sintering at $1,200^{\circ}C$. XRD result of membrane showed single perovskite structure. Leakage and oxygen permeation test were conducted on the membrane sealed by glass ring as a sealing material. The oxygen permeation flux increased with increasing temperature and pressure difference and maximum oxygen permeation flux was $2.3mL/min{\cdot}cm^2$ at $950^{\circ}C$ with $Po_2$ = 0.63 atm of oxygen partial pressure. The oxygen permeation in the condition of air with $CO_2$ (300 ppm) as feed stream decreased as much as only maximum 2.9% in comparison with air feed stream. It indicated $BaCo_{0.7}Fe_{0.22}Nb_{0.08}O_{3-{\delta}}$ membrane is more stable than another membrane for carbon dioxide.

• Membrane Journal
• /
• v.25 no.5
• /
• pp.415-421
• /
• 2015

$SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ oxide was synthesized by solid state reaction method. Dense ceramic membrane was prepared using as-prepared powder by pressing and sintering at $1250^{\circ}C$. XRD result of membrane showed single perovskite structure. The oxygen permeability were measured under 0.21 atm of oxygen partial pressure ($P_{O_2}$) and between 800 and $950^{\circ}C$. The oxygen permeation flux of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ membrane was increased with the increasing temperature. The maximum oxygen permeation flux was $1.839mL/min{\cdot}cm^2$ at $950^{\circ}C$. Long period permeability experiment was carried out to confirm the phase stability and $CO_2$-tolerance of membrane containing Nb in the condition of air with $CO_2$ (500 ppm) as feed stream at $900^{\circ}C$. The phase stability and $CO_2$-tolerance of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ were investigated by XRD and TG analysis. The result of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ which exposed carbon dioxide for 100 hours indicated 8wt% of $SrCO_3$. But it was known that the level of $SrCO_3$ production dose not have a significant effect on oxygen permeability.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.527-534
• /
• 1992

Raney nickel was used as catalyst in the hydrogen electrode for an alkaline fuel cell. The hydrogen electrode manufactured with the Raney nickel catalyst which was sintered at $700^{\circ}C$ was found to have the highest electrode performance. Using the Raney nickel powder of average particle size $90{\AA}$ for the electrode, the current density which had been measured was $450mA/cm^2$ at $80^{\circ}C$ using 6N KOH solution as an electrolyte. The effects of PTFE addition were investigated with CO-chemisorption, polarization curves and Tafel slope. CO-chemisorption had shown the optimum value when the Raney nickel was mixed with 5wt% of PTFE, but from the current density and Tafel slope at porous Raney nickel electrode, the appropriate value of PTFE addition was 10wt%. Recommendable Ni and Al portion for Raney nickel was 60 : 40 and loading amount was $0.25g/cm^2$. Also the influence of pressing pressure for manufacturing catalytic layer and for junction with gas diffusion layer was examined. The morphology of catalyst surface was investigated with SEM. The influence of reactivation time and heat-treatment temperature were also studied.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.1
• /
• pp.5-9
• /
• 2008

Cordierite has a very low thermal expansion coefficient, but has problem that it has a weak mechanical strength and is apt to be attacked by acid such as sulfur for using as a diesel particulate filter support. The physical properties of $ZrTiO_4$ modified with $SiO_2,\;Al_2O_3$, MoOx, $Cr_2O_3\;and\;Nb_2O_5$ were investigated with XRD, SEM, UTM and thermal expansion, etc. in this paper. $ZrTiO_4$ powder was synthesized as a monoclinic structure with processes that starting materials of $TiO_2\;and\;ZrO_2$ were mixed with ball mill and calcined above $1240^{\circ}C$ for 3 hr. Additive modified $ZrTiO_4$ specimens for flexural strength and thermal expansion measurement were obtained by mixing $ZrTiO_4$ powder with additives, pressing and firing at $1300^{\circ}C$ for 3 hr. The porosity of additive modified $ZrTiO_4$ decreased monotonically with increasing additive content by 5 wt% regardless of additive types and saturated for further increase of additive by 10wt. The flexural strength of $Al_2O_3$ (5, 10 wt%) modified $ZrTiO_4$ shows a large increase, but that of other additives modified $ZrTiO_4$ decreased. The thermal expansion coefficient of additive modified $ZrTiO_4$ except $Nb_2O_5$ decreased continuously with the content of additive. In particular, the lowest thermal expansion coefficient of $ZrTiO_4$ was obtained for the additive of $SiO_2$.

• Journal of East-West Nursing Research
• /
• v.1 no.1
• /
• pp.50-71
• /
• 1997

The intention of this study is to apprehend the con. tents and methods of herb remedies that are commonly conducted when there are health-problem cases of ENT, eyes, teeth and skin. Methods of this study are divided into two stages : 1) For a period of six months from December 1994 to June 1995, some 40 persons who are believed to be well versed with herb remedies have been randomly chosen, and we made a survey on herb remedies by symptoms: and 2) we have endeavored to make their grounds evident through the studies on literatures with the focus on the basic data collected. Their results are as follows: 1) When one feels a pain in ears, such herb remedies are employed as pouring the vapor into ears, which is made by steaming Alaska pollack, or as applying or wiping with the juices of radish or the ginkgo, or' alum. Applying the radish juice is effective for sterilization and fever removal: and applying the ginkgo juice is effective for cleanliness. But, plastering alum, sesame oil or castor oil, or pouring the vapor of Alaska pollack into ears are perhaps effective but do not have any pharmacologic grounds. 2) When one bleeds at the nose, such kinds of herb remedies are applied as stimulating nose or head with cold water, pressing nose or ridge of nose, or filling up nares with mashed mugworts. In addition, they have utilized garlic or leeks. Such methods as stimulating with cold water or just pressing nose and ridge of nose is based on reasonable grounds, i.e. vasoconstriction and vascular compression ; and applying mashed garlic on the sole of foot is good for the circulation of Qui ; and the use of mugworts and leeks is based upon the pharmacological function of hemostasis. 3) When one feels a sore throat such kinds of herb remedies are employed as gargling or rinsing throat with brine, drinking hot gruel or water, or drinking the juice of mugwort, radish, ginger or Chinese quince. Gargling with brine or drinking the juice of mugwort, radish or ginger is based upon the pharmacological function of pain alleviation, fever removal, and detoxication. 4) When a boil is formed in mouth, such herb remedies are applied as spreading honey, brine or alum water, and taking gall nut, Chinese matrimony vine, lotus root, etc, for drugs. Spreading honey, brine or water that is made by infusing gallnut, Chinese matrimony vine, lotus root is based upon such functions as hematosis, astriction, antibacterial, and antiphlogistic, Alum, eggplant and licorice are said to be effective, but their pharmacological effects have no grounds. 5) When one has conjunctivitis such herb remedies are commonly applied as irrigation with brine and dropping breast milk in eyes. Moreover, such other drugs are used as plantain. shepherd's purse, and purslane, etc. The use of brine, breast milk, plantain, shepherd's purse and purslane is based upon such functions as sterilization, antiphlogistic, disinfection and pain relieving. Eriocaulon sieboldianum, bean stem, bean pod and narcissus leaves are said to be effective, but their pharmacological action have no basis. When one has a stye, such herb remedies are applied as extracting eyelashes, stimulating by a massage of middle finger, third finger or big toe, as well as sear ing with a heated bamboo comb that is fine-toothed. Other than these, plantain and nightshade's nuts are used as drugs for it. Extracting eyelashes corresponds with exclusing suppurative node and draining the stye of pus ; and the use of plantain is based upon disinfection: and nightshade's nuts are said to be effective, however, their pharmacological action has no grounds. 6) For a treatment of toothache, such herb remedies are commonly employed as rinsing mouth with brine and holding cold water or gasoline in the mouth ; and as the drugs that are believed to be effective have been Welsh onion, ginger and castor-oil, plant, etc. The use of Welsh onion is based upon pain killing, antiinflammatory actions, and the use of ginger is based upon detoxication and disinfection ; and seeds of castor-oil plants are said to be effective, but they have no pharmacological basis. 7) When one has hives, such herb remedies are commonly applied as rubbing burned straw in affected parts, exposing to its smoke, rubbing with salt, sweeping down with a broom, and spreading and drinking boiled water of trifoliate orange. The use of cassia tora seeds, walnut, aloe and radish is said to be effective. The use of cassia tor a seeds has the functions of intestinal order, anti-paralysis, etc. The use of walnut has resulted in an increase of blood by invigorating spirits ; and the use of aloe is based upon disinfection, antibiotic, anti-salt, antihistamine and detoxication action. But, the effects of radish juice and straw's smoke have no pharmacological grounds. 8) When one gets a boil, such herb remedies are commonly used as applying a plaster, paste of flour mixed with yolk, soy sauce or honey, as well as spreading pounded elm tree. Other remedies that have been said to be effective are ; heating with mugwort, brine, wild rocambole, aloe, onion, squid's bone, etc. The use of mugwort is based upon pain killing, astringent antiinflammatory and tranquility. Wild rocambole is based upon the generation and maintenance functions of cell-joining textures ; elm tree upon antiphlogistic ; aloe upon fever removal and antiphlogistic ; onion on pain killing, fever removal, antiphlogistic and tranquility ; squid's bone on astriction: and brine or vinegar on sterilization. Pine resin and gardenia seed are said to be effective, but they have no pharmacological basis. 9) When one cuts his skin, such herb remedies are commonly employed as spreading mugwort's juice or squid's bone powder, or pressing the wounds. In addition, kalopanax, onion and fine soil are employed. The use of mugwort, kalopanax and squid's bone is based upon such functions as hemostasis, sedation, pain killing, antibacterial ; and fine soil is said to be effective, but it has no pharmacological basis. 10) When one suffers from whitlow, such herb remedies are commonly utilized as heating with boiled soy sauce, spreading soybean paste, or dipping into eggs, etc. Other drugs that have been employed are onion root, brine, eggplant, potato, loach, etc. The use of onion is based upon pain killing and antiphlogistic functions ; and that of brine upon antiphlogistic function. The use of soy sauce or soybean paste, fomentation, eggplant, potato and loach is said to be effective, but it has no pharmacblogic ground. 11) For the treatment of frostbite, such herb remedies are commonly used as dipping the affected part into frozen soybean sack, using boiled water of eggplant stem, garlic caulis, onion, hot pepper, caulis. Onion is based upon antiphlogistic and tranquility actions garlic upon disintection, metabolic exacerbation, tonic and aphrodisiac actions and the use of eggplant and hot pepper is based upon help blood circulation, dissolution and excretion of waste matters in vein. 12) For the treatment of burn, such herb remedies or drugs are commonly used as cleansing with Korean gin, spreading eggs, cleansing with cold water and soap water ; and as brine, cactus, moss, soybean paste, oil, etc. The cleansing with Korean gin, cold water, soap water, brine, vinegar is based upon cleaning and sterilizing functions ; and the use of cucumber is based upon nu. trition provision, and strengthening of resisting power by adjustment of metabolism. The use of potato, cactus, moss, oil and eggs is said to be effective, but their phamacological functions are not clarified. In view of the above results, we can realize that the drugs that have been employed in herb remedies are quite diverse. However, in regard to majority of herb remedies that have been employed by symptoms, the pharmacological functions of their drugs have not been clarified, and they are merely known as effective. Furthermore, they have not been recorded in the literature as yet ; and we confirm that there have been many herb remedies that were executed without the proper knowlege of their effects. It is now our view that the results of this survey may be utilized for consulting data in regard to the use of herb remedies.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.172-179
• /
• 2006

When $Al_2O_3-MoO_3$ mixture is reduced, $MoO_3$ is only reduced to Mo at $900^{\circ}C$. But a compound between $Al_2O_3$ and Mo is not formed up to $1300^{\circ}C$. In the case of $Al_2O_3-MoO_3-MnO_2$ mixture, an intermediate compound $Mn_2Mo_3O_8$ is firstly formed at $900^{\circ}C$ and changes to $MnAl_2O_4$ at $1100^{\circ}C{\sim}1300^{\circ}C$. $Al_2O_3/Mo/MnO_2$ composite are manufactured by a selective reduction process in which Mo is only reduced in the powder mixture of $Al_2O_3,\;MoO_3\;and\;MnO_2$ oxide. For $Al_2O_3/Mo$ composite, the average grain size was not changed with increasing Mo content because of inhibition of grain growth of $Al_2O_3$ matrix in the presence of Mo particles. Fracture strength increased with increasing Mo content due to phenomenon of grain growth inhibition of $Al_2O_3$ matrix. Hardness decreased because of a lower hardness value of Mo, whereas fracture toughness increased. For $Al_2O_3,\;Mo\;and\;MnO_2$ composite, grain growth was facilitated by MnOB and it showed a lower fracture strength because of grain growth effect with increasing Mo and $MnO_2$ content. Hardness decreased because of the grain growth of matrix and coalesced Mo particles to be located in grain boundary, whereas fracture toughness increased.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.477-483
• /
• 2008

$La_{0.7}Sr_{0.3}Co_{0.2}Fe_{0.8}O_{3-{\delta}$ oxide was synthesized by a citrate method and a typical dense membrane of perovskite oxide has been prepared using as-prepared powder by pressing and sintering at $1300^{\circ}C$. Precursor of $La_{0.7}Sr_{0.3}Co_{0.2}Fe_{0.8}O_{3-{\delta}$ prepared by citrate method was investigated by TGA and XRD. Metal-citrate complex in precursor was decomposed into perovskite oxide in the temperature range of $260{\sim}410^{\circ}C$ but XRD results showed $SrCO_3$ existed as impurity at less than $900^{\circ}C$. Electrical conductivity of membrane increased with increasing temperature but then decreased over $700^{\circ}C$ in air atmosphere ($Po_2=0.2atm$) and $600^{\circ}C$ in He atmosphere ($Po_2=0.01atm$) respectively due to oxygen loss from the crystal lattice. The oxygen permeation flux increased with increasing temperature and maximum oxygen permeation flux of $La_{0.7}Sr_{0.3}Co_{0.2}Fe_{0.8}O_{3-{\delta}$ membrane with 1.6 mm thickness was about $0.31cm^3/cm^2{\cdot}min$ at $950^{\circ}C$. The activation energy for oxygen permeation was 88.4 kJ/mol in the temperature range of $750{\sim}950^{\circ}C$. Perovskite structure of membrane was not changed after permeation test of 40 h and the membrane was stable without secondary phase change with 0.3 mol Sr addition.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.