초록
2015년 기준으로 국내에서 발생된 가축분뇨 중의 80%가 퇴비로 전환되어 유기성 비료자원으로서 농경지에 시용되었다. 현재 이용되고 있는 가축분 퇴비의 형태는 분말형이 주를 이루고 있으며 입상 형태 퇴비로서는 직경 5~10 mm 크기의 원기둥 모양으로 가공된 펠릿이 일부 사용되고 있다. 본 연구에서는 우분을 부숙시킨 분말형 퇴비를 원기둥 막대 형태의 펠릿과 구(구슬) 형태(Sphere type)의 펠릿으로 가공하였을 때의 특성을 비교, 분석하였다. 분말 형태 퇴비의 질소농도는 건물량 기준으로 1.05% 이었으며 원기둥 막대 형태와 구 형태로 펠릿화된 이후에는 각각 1.23%와 1.24%로서 가공방법에 따른 차이는 거의 발생하지 않는 것으로 나타났다. 입상화 가공효과를 분석한 결과, 스쿠루 압착식과 원통 회전형 입상화 방식 등의 두 가지 가공방식 모두에서 원료의 수분함량이 입상화가공에 있어 가장 큰 영향요소인 것으로 나타났다. 수분 함량 20% 수준으로 건조하였을 때의 비중은 분말형 퇴비에 비해 원기둥 막대 형태와 구 형태 펠릿퇴비는 각각 1.38과 1.13 수준이었다. 퇴비수송과 취급에 관련되는 요소인 압축강도는 원기둥 막대형과 구 형태 펠릿퇴비에서 각각 $27.6kg/cm^2$ 와 $11.3kg/cm^2$ 수준으로서 원기둥 막대형태 펠릿퇴비가 더 높았다.
In the Korea, 80 percent of livestock manure were converted into compost and used as organic fertilizers. The livestock manure compost has two types of powder and pellet type (ID= 5~10 mm). The aim of this study was to investigate the properties of two types of cow manure compost pellet (cylinder and sphere type). Nitrogen concentrations of cylinder type and sphere type of compost pellets were 1.23 and 1.24%, respectively. There were similar with nitrogen concentration of cylinder and sphere types of compost pellets. As a result of analyzing the effect of granulation processing, it was found that the moisture content of the raw material was the most influential factor in the granulation processing in both of the processing types of the screw pressing method and the rotating cylinder method. When the cylinder and sphere types of compost pellets were dry to 20% of moisture content, the specific gravities of these compost pellets were 1.38 and 1.13, respectively. The compressive strength of cylinder type pellet and sphere type pellet were 27.6 and $11.3kg/cm^2$, respectively.