• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.93-98
• /
• 2001

Wastewaters produced in textile industrial processes contain dyes which are not easily amenable to biological treatment. The object of this study is to determine the post-treatment system of biological process for the textile wastewater by comparing three different types of chemical process, which were 1) post-treatment by ozone or UV, 2) post-treatment by coagulation,3) post-treatment by ozone or UV followed by coagulation. In an application ozone or UV as a post-treatment, color was generally decreased with time, however, SCOD removal effect was not that good. When coagulation was used as point-treatment process, the effluent quality was satisfying. Therefore, the application of coagulation process as a post-treatment of biological process would be more desirable than that as a ozone or UV.

• Journal of Families and Better Life
• /
• v.24 no.1 s.79
• /
• pp.83-102
• /
• 2006

The purpose of this study is to examine the effects of the divorce process on post-divorce adjustment. This study specifically examines the effects of the pre-divorce marital quality, perceived barriers to divorce at the time of considering divorce, and the level of everyday stress after divorce on post-divorce adjustment of men and women focused on gender differences. Data gathered from 147 men and 208 women living in Seoul and Gyeonggi province were analyzed for this study. The major findings are as follows. First, pre-divorce marital quality, perceived barriers to divorce at the time of considering divorce, and the level of everyday stress after divorce, have both positive and negative effects on post-divorce adjustment of divorced men and women depending on the stages of divorce process. Second, the relationship between various aspects of divorce process and adjustments differ according to the sub-dimension of post-divorce adjustment. Third, divorce process functions differently for divorced men and women. The results show the importance of considering the divorce process, including both pre-divorce and post-divorce circumstances in order to have a good understanding of post-divorce adjustment of men and women.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.659-662
• /
• 2002

SL(Stereolithography) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. This effect brings about excessive surface roughness and requires additional post-process finishing such as abrasive techniques that are detrimental to part geometry and time consuming. Hence a wax coating and grinding post-process is proposed to improve the surface quality of SL part. The wax that has suitable properties for the proposed post-process is coated all over the part surface. By grinding the thin layer of coated on the SL part only, the surface roughness can be improved without any damage on the part. From the experimental results, This approach is considered to be very practical fur die casting with RT(Rapid Tooling) techniques.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.3
• /
• pp.331-337
• /
• 2013

Post-chlorination for disinfection in portable water process is final process. The design factors of post-chlorination are inflow pipe line from tank of filtrated water to cleanwell, injection point of chlorine, appropriate shape of baffle in cleanwell for disinfection efficient improvement. Until now, we did not have the design standard for post-chlorination. we evaluated most suitable design method of post-chlorination process in portable water process by using computational fluid dynamics in this research. We found the result that the pipe to connect the cleanwell should be one. If pipe line split into two or more, uniform distribution of the flow is difficult. Second, optimal injection point of chlorine is the middle of pipe line to connect the cleanwell. Therefore, it is not economical to install chlorine contact basin in cleanwell. Third, the shape of baffle should be designed in order to water flows in one direction. And we found that it is better to design the low number of flow turning.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.98-105
• /
• 2014

According to a simple survey on the current status of the assembly line design, it was found that trial and error methods on the basis of experiences have been used mainly in domestic manufacturing industries, even though there exist a lot of excellent line balancing studies. It seems that more practical researches should be carried out to develop user-oriented line balancing tools especially for small and medium-sized enterprises. This study presents a design of the line balancing tool which can support the line balancing tasks of nonspecialists. The proposed design tool is composed of three major modules: pre-process, line balancing, and post-process. In particular, pre-process and post-process are newly proposed to increase its ease of use. We applied the proposed design to a test problem and test result showed that our practical method may contribute to enhance the efficiency of production operations management.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.167-175
• /
• 2013

This study is the process of making high-definition TV broadcast color correction affects the end result comparison is focus on implement through study. In the production process and the impact on the color Correction in the video as an study for UHD, 4K, 6K video production workflow improvement of an effective program in the present and time and cost in the post production process, color correction for the final video through the production and overcome the failure of further in-efficient color correction study will help you to solve the problem. This study is the color changes over the course of the final video to see how much influence color correction of post-production. Color correction using a program of courses in Visual quality, regularly presented the possibility to retain and make on high definition video production post-production process for color correction method is utilized as the basis of study.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.239-244
• /
• 2015

Chemical mechanical polishing (CMP) is one of the most important processes for enabling sub-14 nm semiconductor manufacturing. Moreover, post-CMP defect control is a key process parameter for the purpose of yield enhancement and device reliability. Due to the complexity of device with sub-14 nm node structure, CMP-induced defects need to be fixed in the CMP in-situ cleaning module instead of during post ex-situ wet cleaning. Therefore, post-CMP in-situ cleaning optimization and cleaning efficiency improvement play a pivotal role in post-CMP defect control. CMP in-situ cleaning module normally consists of megasonic and brush scrubber processes. And there has been an increasing effort for the optimization of cleaning chemistry and brush scrubber cleaning in the CMP cleaning module. Although there have been many studies conducted on improving particle removal efficiency by brush cleaning, these studies do not consider the effects of brush contamination. Depending on the process condition and brush condition, brush cross contamination effects significantly influence post-CMP cleaning defects. This study investigates brush cross contamination effects in the CMP in-situ cleaning module by conducting experiments using 300mm tetraethyl orthosilicate (TEOS) blanket wafers. This study also explores brush pre-treatment in the CMP tool and proposes recipe effects, and critical process parameters for optimized CMP in-situ cleaning process through experimental results.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.2
• /
• pp.213-218
• /
• 2008

Prediction models for post-chlorination require complicated information of reaction time, chlorine dosage considering flow rate as well as environmental conditions such as turbidity, temperature and pH. In order to operate post-chlorination process effectively, the correlations between inlet and outlet of clear well were investigated to develop prediction models of chlorine dosages in post-chlorination process. Correlations of environmental conditions including turbidity and chlorine dosage were investigated to predict residual chlorine at the outlet of clear well. A linear regression model and autoregressive model were developed to apply for the post-chlorination which take place time delay due to detention in clear well tank. The results from autoregressive model show the correlationship of 0.915~0.995. Consequently, the autoregressive model developed in this study would be applicable for real time control for post chlorination process. As a result, the autoregressive model for post chlorination which take place time delay and have multi parameters to control system would contribute to water treatment automation system by applying the process control algorithm.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.97-103
• /
• 2008

In this paper, the Post Process for the manifold complex processing using CAD/CAM Software of two and a half Dimensions(2.5D) has been developed to maximize the application of the manifold manufacturing machine. Many companies are currently making use of high price systems to improve manufacturing process using the multi-axial complex manufacturing machine. In accordance with the requirements, the utilization of CAD/CAM Software for the manifold complex manufacturing machine is earnestly demanded. However, the experts who have experience in manifold manufacturing machine are insufficient. Consequently the outcomes of the Post Process for 2.5D CAD/CAM Systems have been dealt in order to be smoothly operated by those who have basic skills and be understood in process drawings. CNC program functions can be specially used as they are, when drawn up. The Post Process for the original point designation and transformation of coordinates has been developed and applied. The results gave proof of practical manufacturing outcomes.

• Journal of Korean Clinical Nursing Research
• /
• v.14 no.3
• /
• pp.141-151
• /
• 2008

Purpose: This study aimed at applying a standardized nursing process to adult surgery patients of post anesthetic care unit, and examining the validity of linkages in the measuring index of nursing outcome by which nursing outcome was applied. Method: The subjects were 184 surgery adult patients admitted at the post anesthetic care unit of Y university hospital. This study was used the measured tool developed by Choi et al.(2004) and by Lee (2004) who had already verified a validity based on Johnson and Bulechek's study(2001). Results: The nursing diagnosis of an acute pain, an urinary retention, a nausea, a decreased cardiac output, an ineffective airway clearance and an ineffective airway clearance were used in taking care for patients. The related factors according to the main nursing diagnosis were as the following: an injurious physical factor in an acute pain, reflex are inhibition in an urinary retention, post surgical anesthesia in a nausea, stroke volume change in a decreased cardiac output, secretory stasis in an ineffective airway clearance, pain in an ineffective breathing pattern. Conclusion: The study results could be facilitated in nursing process application for nurses at post anesthetic care unit. Also this study would provide basic data to develop a computerized program for the improvement of nursing process application.