• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.17-22
• /
• 2020

Recently, the decrease in thin film thickness has been actively studied by changing several physical elements such as the increase in revolution velocity of lower substrate equipped with AC or DC motor. In this paper, we propose a novel spin coater control system that changes AC or DC motor and common use software with limitation of velocity and position control into step motor and LABVIEW software based on GUI to control revolution velocity and position more precisely. By determining six input values of rotation velocity 1, 5, 10, 25, 50, 100 PPS, we fabricated six samples using coating target, TA(tantalum) on silicon substrate and measured their thin film thickness by SEM. Hence, this research can be applied to inferring thin film thickness of tantalum regarding any value of revolution velocity without additional experiments and for linear reference model via property analysis of thin film thickness using other thin-film materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1053-1055
• /
• 2000

This paper describes a new approach to estimating permanent magnet synchronous motor(PMSM) speed and position from measured terminal voltages and currents for speed-sensorless vector control. The proposed system is based on observing the instantaneous reactive power of the motor. The described technique is very simple and robust to variations of motor parameters. The new approach is not dependent upon the value of the stator resistance. Also, MRAS schemes are chosen for determining the adaptive law for the speed and the position estimator. The effectiveness is verified by simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.384-386
• /
• 2000

This paper describes a new approach to estimating permanent magnet synchronous motor(PMSM) speed and position from measured terminal voltages and currents for speed-sensorless vector control. The proposed system is based on observing the instantaneous reactive power of the motor. The described technique is very simple and robust to variations of motor parameters. The new approach is not dependent upon the value of the stator resistance. Also, MRAS schemes are chosen for determining the adaptive law for the speed and the position estimator. The effectiveness is verified by the experimental results.

• 산업경영시스템학회지
• /
• 제19권39호
• /
• pp.19-26
• /
• 1996

A solution procedure to minimize the number of storage carousels has been developed under the carousel throughput rate and total storage capacity requirements. The number of carousels can be reduced by increasing the throughput rate of carousels which depends upon the size of carousels, the storage item allocation to carousels, and the item position assignments in each carousel. Since the problem is very complicated and hard to solve optimally, the following solution procedure to solve the problem hierarchically is proposed: With a given number of carousels, the storage items are allocated to carousels so that the slowest average transaction time among carousels may be minimized, and then the position of each item is assigned in the allocated carousel so that the throughput of the carousel can be maximized.

• Journal of Astronomy and Space Sciences
• /
• 제29권4호
• /
• pp.351-362
• /
• 2012

We made a study on real-time determination method for relative position using the laser-measured distance data between satellites. We numerically performed the determination of relative position in accordance with extended Kalman filter algorithm using the vectors obtained through nonlinear equation of relative motion, laser simulator for distance measurement, and attitude determination of chief satellite. Because the spherical parameters of relative distance and direction are used, there occur some changes in precision depending on changes in relative distance when determining the relative position. As a result of simulation, it was possible to determine the relative position with several millimeter-level errors at a distance of 10 km, and sub-millimeter level errors at a distance of 1 km. In addition, we performed the determination of relative position assuming the case that global positioning system data was not received for long hours to see the impact of determination of chief satellite orbit on the determination of relative position. The determination of precise relative position at a long distance carried out in this study can be used for scientific mission using the satellite formation flying.

• 한국방사선학회논문지
• /
• 제16권2호
• /
• pp.151-156
• /
• 2022

적은 수의 광센서를 사용하는 검출기를 설계하고, 최대우도함수를 통해 감마선과 상호작용한 섬광 픽셀의 위치를 디지털 위치로 측정하는 연구를 수행하였다. 이를 위해 섬광체 내에서 빛의 이동을 모사할 수 있는 DETECT2000을 사용하여 시뮬레이션을 수행하였으며, 위치 측정의 정확도를 평가하였다. 6 × 6의 섬광 픽셀 배열과 4개의 광센서를 사용하여 검출기를 구성하였으며, 각 섬광 픽셀 중심에서 감마선 이벤트를 발생시켜 수집된 빛의 비율을 통해 순람표를 작성하였다. 새로운 위치에서 발생된 감마선 이벤트를 최대우도함수의 입력값으로 적용하여 순람표와 비교후 섬광 픽셀의 위치를 디지털 위치로 변환하였다. 모든 섬광 픽셀들에서 평가하였으며, 그 결과 99.1%의 높은 정확도를 획득하였다. 이러한 방법을 현재 사용되는 시스템에 적용할 경우 섬광 픽셀의 위치를 판별하는 과정의 간소화를 이룰 것으로 판단된다.

• Ocean and Polar Research
• /
• 제42권1호
• /
• pp.77-88
• /
• 2020

This paper presents the coordinate systems used for trawl doors modeling, and provides matrix equations of connection between these systems. The projections of the forces acting on the door into axes of various coordinate systems were obtained, which were used in the door equilibrium equations. Six equilibrium conditions for the door as a solid were obtained: formulas that allow for the door area in plan to be determined; its weight in water; its mass; three moment equations for determining the position of the warp and backstrops fastening points to the door with triangular and quadrangular backstrop arrangements. It was found that the moment equilibrium equations of trawl doors are generally incompatible, which was not found by any of the authors who have previously conducted research into trawl doors. Using the Kronecker-Capelli theorem, the compatibility equation is obtained. This equation includes the coordinates of the backstrop fastening points to the door, which means that these points cannot be randomly selected. The technique of determining the warp and backstrops' fastening points position to the door is described. Conditions of directional (by angle of attack) and roll (in angle of roll) stability of the doors' equilibrium are presented. The equations presented in this paper comprise a mathematical model that allows, when designing the doors, to select optimal parameters, as well as to carry out adjustments for trawling purposes to ensure the stable movement of the doors and the entire trawl system.

• 한국컴퓨터정보학회논문지
• /
• 제10권6호
• /
• pp.345-354
• /
• 2005

이동매니퓰레이터는 -이동로봇과 작업로봇이 직렬로 결합된 형태 - 작업 공간 밖에 존재하는 작업에 대하여 높은 성능으로 작업을 수행할 수 있으므로 고정 베이스 구조의 매니이퓰레이터에 비하여 다양한 작업 환경에서 유용하다. 임의의 위치에 있는 물체를 인식하기 위하여 이동매니퓰레이터에 부착된 2자유도의 능동카메라에 의해 입력되는 영상과 능동카메라의 기구학적 관계에 기초를 두는 직각좌표계를 이용하여 물체의 위치와 이동로봇의 위치를 구하는 방법을 제시한다. 동차행렬을 이용하여 이미지정보와 물체의 위치를 해석하므로 이동매니퓰레이터의 최적경로를 생성한다. 최종적으로, 물체의 인식을 통하여 작업로봇을 제어할 수 있는 조인트변수의 값을 계산한다. 제안된 방법은 제작된 이동매니퓰레이터로 시뮬레이션과 실험을 통하여 확인되어지고 논의된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1525-1532
• /
• 2010

현대의 측량기술은 위성항법시스템 및 원스톱디지털장비의 등장으로 지구공간상 어느 지점이라도 단일좌표체계의 절대성위치 취득이 가능한 시대로 진보하고 있다. 한편 철도의 속도는 나날이 고속화 되어가고 있어 철도건설시 궤도중심을 포함한 주요시설물 등의 위치를 결정할 때 고도화된 정밀성이 요구된다. 이에 따라 철도건설공사측량에서는 기술지원과 절차가 지침화되어 적용되고 있다. 본 연구에서는 철도건설의 설계와 시공 그리고, 유지관리로 이어지는 과정에서 철도건설측량지침 적용에 따른 측량시 문제점에 대한 대안을 시범지구의 실데이터를 통해 분석 연구 제시하였다.

• 로봇학회논문지
• /
• 제9권1호
• /
• pp.67-77
• /
• 2014

An electric motor is the one of the most important parts in robot systems, which mainly drives the wheel of mobile robots or the joint of manipulators. According to the requirement of motor performance, the controller type and parameters vary. For the wheel driving motors, a speed tracking controller is used, while a position tracking controller is required for the joint driving motors. Moreover, if the mechanical parameters are changed or a different motor is used, we might have to tune again the controller parameters. However, for the beginners who are not familiar about the controller design, it is hard to design pertinently. In this paper, we develop a nominal robust controller model for the velocity tracking of wheel driving motors and the position tracking of joint driving motors based on the disturbance observer (DOB) which can reject disturbances, modeling errors, and dynamic parameter variations, and propose the methodology for the determining the least control parameters. The proposed control system enables the beginners to easily construct a controller for the newly designed robot system. The purpose of this paper is not to develop a new controller theory, but to increase the user-friendliness. Finally, simulation and experimental verification have performed through the actual wheel and joint driving motors.