• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.333-350
• /
• 1999

Today freeway is thought to be a very important transportation facility carrying tremendous traffic flow as the main corridor within the area of between the areas. However freeway is experiencing severe congestion and accidents by increased entrance ramp flow especially at peak time period. Ramp meters on the freeway entrance ramps that supply traffic to the freeway in a measured or appropriately regulated amount are needed for alleviating freeway congestion. Because ramp meters can be operated to discharge traffic at a measured or regulated rate thus maintaining more uniform speed on the mainline section maximizing the throughput to the freeway within the capacity of a downstream bottleneck and reducing the congestion related accidents. Thus the objectives in this study were to analyze the traffic characteristics on the freeway I-94 with ramp metering system before/after ITS technology in Detroit (Michigan) area compare shifts of the traffic characteristics on the freeway I-94 before/after ITS technology and finally suggest a better ramp metering strategy for the freeway system The following results were obtained: i)Flow occupancies and speeds on the mainline merge section of freeway were shown to be a big difference depending on the peak periods areas and directions based on the distribution of traffic flow characteristics on the freeway. ii)Reduced speed was shown to be more than 5 mph and ramp flow was also shown to be more than 240 vph at peak periods if there was the ramp metering system constructed on the freeway. iii)Ramp metering system was shown to be optimally operated on the freeway if ramp flow could be maximized within the range of over 900 vph and reduced occupancy could be also maximized by no more than 2 percent at peak periods. iv)The average flows on the freeway after the ITS technology were shown to be a decrease of over 20% depending on the peak periods areas and directions when compared with those flow on the freeway before the ITS technology. over 20% depending on the peak periods areas and directions when compared with those speeds on the freeway before the ITS technology. vi)The average metering rates on the freeway after the ITS technology were shown to be an increase of over 10% depending on the peak periods areas and directions when compared with those metering rates on the freeway before the ITS technology.

• Journal of Korea Port Economic Association
• /
• v.32 no.2
• /
• pp.39-57
• /
• 2016

Many countries are developing transportation technologies aimed at reducing environmental pollution and the environmental burden. For example, environmentally friendly transportation routes and methods are being used to improve inland waterways in Europe. Against this backdrop, a case study was conducted on special cargo (weight cargo, earth and sand, etc.) on Korea's Gyeong-In Ara Waterway, an inland waterway connecting the Han River and the West Sea, serving a distribution function. The results of the analysis showed that coastal shipping could be promoted using the waterway, including a positive synergy among environmental, economic, and social aspects. That is, by shifting from overland transportation to marine transportation, it is possible to reduce environmental pollution, ease traffic congestion, decrease traffic accidents, and shorten the licensing period for the weight cargo demand of the northern area of the Han River. In this respect, the Gyeong-in Ara Waterway could become an environmentally friendly transportation route, promoting coastal shipping in Korea. However, for this to occur, support systems such as subsidies for marine transportation and using the inland waterway are required, as happens in the EU. Furthermore, existing policies to promote coastal shipping should be improved and applied more broadly.

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.313-346
• /
• 2011

The Roman thinker, Cicero said, "The Nations that rule the sea, rule the world". In the world history, the countries done critical roles, have emphasized the importance of the sea. The world history is called as the histories of the countries which governed the sea, such as Phoenicia, Greece, Carthago, Roma, Portugal, Spain, England, and USA. The sea is not only the political, economical, social and cultural basis, serving as the origin of resources and channel of communication, logistics and distribution but also the area of dreams and imaginations and ground of potentiality and visions. This paper reviewed the major countries and their histories to realize the vision of Korea, super power country of maritime and fishery. Main maritime policies and its core issues and prospects of Korea were reviewed. And on the basis of these reviews, the vision of super power country of maritime and fishery was suggested. The vision, the 5th super power country of maritime and fishery in 2020, and 10th country of maritime technology level in 2020 and their details were proposed also. For achieving the vision, the resurrection of MOMAF is necessary and its reasons and 5 necessities were suggested. And the directions of the resurrection of MOMAF were proposed in terms of two viewpoints, policy/functional and institutional basis. I think Korea, the super power country of maritime and fishery, can be realized only when MOMAF may be resurrected.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.169-198
• /
• 2014

Due to the recent worldwide economic downturn, companies are required to put more effort into their innovation and quality improvement. In particular, business relationship is increasingly emphasized to be changed from a vertical relationship to a more horizontal relationship, such as collaborative partnership based on trust. In the logistics industry, through the collaboration, consignors can gain competitive advantages by focusing on their core capabilities, and freight forwarders also take advantages of securing stable cargoes and specialist expertise in distribution. Therefore, this study aims to identify key factors for developing a collaborative partnership between freight forwarders and consignors, and further examine the differences between the two groups empirically by using questionnaire survey. Based on the results, the main factors were found as follows: 1) Trust Building, 2) Competence Improvement, 3) Business Ecosystem and 4) Government Assistance. According to the analysis on sub-factors, first, among the four main factors, it turned out that trust is the most important variable. Specifically, the sub-factor of providing regular and stable service was revealed to be most critical. Second, it was found that forwarders need to improve services on 'Information Exchange System' and 'Electronic Data Interchange'. Finally, it is necessary for both consignors and forwarders to have better understanding of partnership. Key implications for both groups are highlighted based on the results.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.47-67
• /
• 2014

This study examined elements which could evaluate a container terminal logistics system from the viewpoint of supply chain management. This study derived the elements of a container terminal logistics system such as flexibility, reliability, responsiveness, and information sharing and 16 evaluation sub-items in the aspect of a supply chain. In the result of analysis, the weight between SCM elements of a container terminal logistics system was the highest in reliability(0.282), followed by flexibility(0.273), responsiveness(0.224), and information sharing(0.221). The conversion weight was calculated by combining the weight of elements of a container terminal logistics system and the weight of evaluation sub-items. The highest weight which was considered as the most important factor to evaluate a container terminal logistics system was work planning(berth, yard) of flexibility(0.081), followed by accurate fulfillment of container work schedule(ship, yard) and the optimum distribution and arrangement of equipment(QC, TC, YT)(0.079), stable works without damage of containers and ships(0.071), and preventive maintenance of equipment and operators' skill(0.070).

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.285-291
• /
• 2015

Exposure to cold sea water can be life-threatening to the drowned individual. Although appropriate life jacket can be usually be provided for the buoyance at the drowning accident, heat loss can make the drowned individual experience the hypothermia. Inflatable life jackets filled with inflatable air pocket can increase the thermal protection as well as the buoyancy force. Because it is important to know how the human body behaves unde the different life jacket, present study compares the thermal insulation capacity of solid type life jacket with that of inflatable life jacket. In order to represent the insulation capacity of life jacket, thermal resistance is estimated based on the assumption of steady-state. Also, a transient three-dimensional thermal distribution of the thigh is analyzed by using finite element method implementing the Pennes bioheat equation. The finite element model is a segmental, multi-layered representation of the body section which considers the heat conduction within tissue, bone, fat and local blood flow rate.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.159-164
• /
• 2016

The goal of this study is to implement a communication system that can monitor the status of the nacelle using the power cable itself, without the dedicated communication lines such as an UTP cable and optical fiber for the offshore wind turbine. An inductive coupling powerline communication system for a MW class offshore wind turbine was proposed and its communication performance was demonstrated. The inductive couplers was designed for operation at up to 500 A using a ferrite composite materials. Field test was carried out on the wind farms of Jeju island. Using the iperf communication test program, we have obtained more than 15 Mbps data transmission rate through the 100 m power cable that was installed between the nacelle and the bottom of the power converter. In the data transmission stability test for a week, there was no failure ever. The minimum transmission rate was 15 Mbps and the average data rate was about 20 Mbps. Next, we have installed an infrared camera inside the nacelle in order to measure the temperature distribution and variation of the nacelle. The real-time thermal image taken by the camera was successfully sent to the monitoring system without error.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.181-191
• /
• 2009

In general, seafarer's human error is considered to be the preponderant muse for the majority of maritime transportation accidents in a merchant ship. The implementation techniques for Human Error Model (HEM) to assess possible accident risk by deck officers including captain, chief officer, second mate and third mate are described in this study. The scope of this work is focused to 642 deck officers in the ship management company with 130 vessels. At first, HEM can be constructed through the statistical analysis and expert's brainstorming process with human data to 642 deck officers. Then the variables $\upsilon$ for the human factors, the evaluation level EP($\upsilon$) for $\upsilon$, the weight $\alpha$ of $\upsilon$, and the title weight $\beta$ of each deck officers can be decided. In addition, through the analysis of ship's accident history, the accident causation ratios by human error ${\gamma}_H$ and by external error ${\gamma}_B$ can be found as 0.517(51.7%) and 0.483(48.3%), respectively. The correlation coefficients to $\upsilon$ are also shown significant for a 95% confidence interval (p < 0.05) for each coefficient. And the validity of HEM is also surveyed by the analysis of normal probability distribution of risk level RL to each deck officer.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.451-466
• /
• 2017

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using highly advanced Modeling & Simulation (M&S) system of Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was carried out and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.103-109
• /
• 2005

At the adjacent sea area of Busan Central Wharf, a variety of vessels, such as middle-large passenger ships, small fast sailing ships, container ships, cargo ships and working ships as well as small miscellaneous vessels are freely sailing comparatively without special steering and sailing Rules and marine traffic control because exclusive wharfs in accord with their purpose and use have been arranged in each wharf. In this research, we analyzed traffic stream and navigational characteristics of main traffic route based on statistics and distribution of tracks by ship's type and tonnage of the passing vessels after conducting marine traffic survey twice using exclusive software by targeting the sea area during the period of time. We examined the traffic safety of the passing vessels by classifying the sea area by each function based on the analysis about this traffic situation, and analyzing the effect by designating 'Buknea passage'. We also studied the plan for the effective rearrangement of Central Wharf considering basically the traffic safety oif arrival and departure in a point if view of navigators.