• 제목/요약/키워드: Port Communication

검색결과 779건 처리시간 0.023초

10기가비트 이더넷 인터페이스를 위한 프레임 다중화기/역다중화기와 IPC를 갖는 10기가비트 이더넷 시스템의 설계 및 구현 (Design and Implementation of 10Gigabit Ethernet System with IPC and Frame MUX/DEMUX Architecture)

  • 조규인;김유진;정해원;조경록
    • 대한전자공학회논문지TC
    • /
    • 제41권5호
    • /
    • pp.27-36
    • /
    • 2004
  • 최근 인터넷 트래픽의 폭발적인 증가에 따라, 매우 빠른 고속 네트워크 장비에 네트워크프로세서(NP)의 사용이 보편화되고 있다. 이에 따라, 기존의 일반적인 마이크로프로세서를 이용한 네트워크 장비의 성능 한계를 벗어나 향상된 성능을 보이는 라우팅 기능과 패킷처리 기능을 분리하는 분산형 시스템 구조가 이용되고 있다. 본 논문에서는 10기가비트 이더넷 포트를 가지는 10기가비트 에지 스위치 시스템에 적용한 패킷 라우팅 처리와 OAM 처리를 위한 분산형 이더넷 IPC 통신 메커니즘과 10Gbps급 이더넷 데이터를 처리할 수 있는 프레임 방식의 MUX/DEMUX 구조를 설계하고 구현하는 방법을 기술한다. 본 논문에서 제안한 분산형 이더넷 UC 통신 메커니즘 구조는 현재 진행되고 있는 10기가비트 이더넷 인터페이스를 갖는 320Gbps급의 백본용 이더넷 스위치 시스템에도 적용하였다.

통신시스템의 데이터 전송선로에 대한 연구 (A Study on the Data Transmission line of communication system)

  • 김석환;이규정;허창우
    • 한국정보통신학회논문지
    • /
    • 제9권6호
    • /
    • pp.1277-1281
    • /
    • 2005
  • 현재 통신시스템에서는 FPGA를 사용하여 여러 가지 로직을 구현하고 있다. 본 논문에서는 데이터 전달 특성을 분석하고 신호의 노이즈와 데이터 손실을 방지하기 위하여 10층의 PCB(Printed Circuit Board)를 만들었다. FPGA에 클럭과 64bit의 데이터를 동기 시켜 전송선로의 길이의 변화와 입력된 클럭의 주파수 변화에 따른 최대 안정된 데이터 전달속도와 전송선로의 길이를 알아보았다. 제작된 PCB보드에서 FPGA의 출력 핀에서 출력포트 사이의 전송선로 길이는 13cm이며 확장된 테스트용 전송선로 보드의 길이는 30cm, 60cm, 120cm이다. 그러므로 전송선로의 길이를 13cm, 43cm, 73cm, 133cm간격으로 측정하였으며, 데이터 전송특성에 대한 클럭 주파수는 100MHz, 50MHz, 100MHz, 125MHz, 150MHz로 나누어 측정하였다. 데이터 전달 특성에서 125Mbps까지는 불가능 하지만 전송선로의 길이가 30cm일 경우 최대 100Mbps까지 안정하게 데이터를 전달할 수 있었다.

Ethernet-Based Avionic Databus and Time-Space Partition Switch Design

  • Li, Jian;Yao, Jianguo;Huang, Dongshan
    • Journal of Communications and Networks
    • /
    • 제17권3호
    • /
    • pp.286-295
    • /
    • 2015
  • Avionic databuses fulfill a critical function in the connection and communication of aircraft components and functions such as flight-control, navigation, and monitoring. Ethernet-based avionic databuses have become the mainstream for large aircraft owning to their advantages of full-duplex communication with high bandwidth, low latency, low packet-loss, and low cost. As a new generation aviation network communication standard, avionics full-duplex switched ethernet (AFDX) adopted concepts from the telecom standard, asynchronous transfer mode (ATM). In this technology, the switches are the key devices influencing the overall performance. This paper reviews the avionic databus with emphasis on the switch architecture classifications. Based on a comparison, analysis, and discussion of the different switch architectures, we propose a new avionic switch design based on a time-division switch fabric for high flexibility and scalability. This also merges the design concept of space-partition switch fabric to achieve reliability and predictability. The new switch architecture, called space partitioned shared memory switch (SPSMS), isolates the memory space for each output port. This can reduce the competition for resources and avoid conflicts, decrease the packet forwarding latency through the switch, and reduce the packet loss rate. A simulation of the architecture with optimized network engineering tools (OPNET) confirms the efficiency and significant performance improvement over a classic shared memory switch, in terms of overall packet latency, queuing delay, and queue size.

유해가스(CO, CO2) 감지정보 전송을 위한 USN 지그비센서노드 구현 (A Study on the USN Zigbee Sensor Node for Transmission to Harmful Gas(CO, CO2) Sensing Data)

  • 천동진;박영직;이승호;김정섭;곽동걸;정도영
    • 전기학회논문지
    • /
    • 제59권7호
    • /
    • pp.1302-1308
    • /
    • 2010
  • In this study, Zigbee Sensor Node to transmit harmful gases CO and $CO_2$ information using wireless communication within the ground and underground structures were developed. Wireless communication protocol was used Zigbee Stack included IEEE 802. 15.4 MAC protocol. For wireless transmission of detected harmful gas signal from ADC of MCU was implemented Zigbee Sensor Node that was developed protocol using Serial-Port-Profile(SPP) here. The proposed Zigbee Sensor Node was verified transmission distance from experiments. Transmission distance was into 90m in experiments. Distance experiments were measured at 10m intervals using sine & pulse wave input signal at indoors. The proposed Route Sensor Node was applied mesh routing protocol. When built up USN(Ubiquitous Sensor Network)using Route Sensor Node, transmission distance was not limited. On the experimental results, harmful gas values between direct measurements and USN measurements were consistent. The semiconductor CO sensor and N-DIR $CO_2$ sensor module as a harmful sensor was used. Therefore, the proposed Zigbee Sensor Node was verified about reliability and validity to build USN for transmission of harmful gas information.

고압전력선 통신을 위한 임피던스 측정 및 정합 방안 연구 (Impedance Measurement and Matching Technique for Medium-Voltage Powerline Communication)

  • 이재조;유정훈;홍충선;이대영
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제53권5호
    • /
    • pp.345-352
    • /
    • 2004
  • Currently, high data rate PLC(Power Line Communications), up to 100 Mbps, which use frequency bandwidth between 2 MHz and 30 MHz is investigated very hard, and commercial PLC modem for low voltage powerline network (indoor) is coming soon into communication market. For the purpose of developing a fit communication system which has little distortion of signal and attenuation, it is surely necessary to know about channel environments of powerline. Especially, the impedance measurement of the powerline and impedance matching are very important. As is known, since medium-voltage powerline (22.9 ㎸) is still working, it is not so simple to measure the powerline impedance. In our study, a portable impedance measurement equipment is developed. It consists of coupling capacitor, a drain coil and impedance matching transformer. The equipment is easily connected to medium voltage line and impedance of power line is measured using a network analyzer. Also, measurement results are used for impedance matching of PLC signal. In fact, matching transformer with several different impedances are used. The matching transformer is connected between coupling capacitor and signal port. In this paper, the developed portable impedance measurement equipment and impedance measurement results are presented. Also impedance matching technique using matching transformers will be explained. We showed the result of the improved performance by the impedance matching.

물류의 효율적 관리를 위한 자동화 시뮬레이션 시스템 설계 (The Design of Automation Simulation System For Efficient Logistics Management)

  • 김상현;이우;오승홍;이주완;김원중
    • 한국전자통신학회논문지
    • /
    • 제17권1호
    • /
    • pp.187-192
    • /
    • 2022
  • 현재 컨테이너 항만은 최신의 정보통신 기술을 활용한 자동화된 운영시스템에 의해 규격화된 컨테이너들은 최적의 적부계획(Stowage Planning)에 의해 체계적으로 이루어지고 있다. 그러나 단위 중량이 수십 톤에 이르는 철강 코일의 적부는 현재까지도 수작업으로 이루어지고 있어서 작업이 매우 비효율적이다. 그 결과로 작업들은 지연되고 안전사고들도 자주 발생되고 있다. 본 연구에서는 수작업에 의한 철강코일의 적부 과정에서 일어나는 판단착오, 체선, 안전사고 등을 방지하기 위하여 철강코일 적부 자동화 시뮬레이션 시스템을 설계하였다.

수중구조를 위한 ICT 기반 수중통신 모니터링 장치 구현 (Implementation of ICT-based Underwater Communication Monitoring Device for Underwater Lifting)

  • 윤종화;강상일;윤달환
    • 전기전자학회논문지
    • /
    • 제26권3호
    • /
    • pp.396-400
    • /
    • 2022
  • 본 연구에서는 해저에서 발견한 인체를 해수면까지 운반하는 인양백을 기반으로 수중구조를 위한 ICT 기반 수중통신 모니터링 장치를 구현한다. 인양백은 에어를 주입하는 리프트백, 사이드백, CO2 카트리지 등으로 패키지화 되어 있다. 모니터링 시스템은 휴대하기 용이한 구조로 모바일 방식으로 개발한다. 수중 초음파 센서 신호는 USB 포트를 사용하여 공급되며, O/S는 리눅스로 구성한다. 수중통신동시험은 동해안에서 수심 6m~40m까지 실시간으로 측정 시험을 진행한다. 초음파 음향센서는 2,400bps로 변환되어 2원화에 따라 전송오차를 검증한다. 센서에서 모니터링까지 통신속도는 115,200bps, 제어기에서 수신부까지 통신속도는 2,400bps를 사용한다. 리프팅 장치의 상용화 단계에서 로우엔드 타입 개발이 용이하고 호환성이 넓도록 한다.

Smart Power Management System for Leisure-ship

  • Park, Do-Young;Oh, Jin-Seok
    • 한국항해항만학회지
    • /
    • 제35권9호
    • /
    • pp.749-753
    • /
    • 2011
  • A leisure ship has a stand-alone type power system, and a generator is in use on this condition. But the generator cannot be operated in condition of leisure activity, ocean measurement and etc, because of environment and noise. Recently, renewable energy system is connected with power system of the leisure-ship for saving energy. The renewable energy system can not supply the stable power to leisure-ship because power generation changes according to weather condition. And most of the leisure ship is operated without methodical power management system. This study's purpose is to develop SPMS(Smart Power Management System) algorithm using the renewable energy (photovoltaic, wind power and etc.). The proposed algorithm is able to supply stable the power according to operation mode. Furthermore, the SPMS manages electric load (sailing and communication equipment, TV, fan, etc.) and reduces operating times of the generator. In this paper, the proposed algorithm is realized and executed by using LabVIEW. As a result, the hour for operating the generator is minimized.

New Configuration of a PLDRO with an Interconnected Dual PLL Structure for K-Band Application

  • Jeon, Yuseok;Bang, Sungil
    • Journal of electromagnetic engineering and science
    • /
    • 제17권3호
    • /
    • pp.138-146
    • /
    • 2017
  • A phase-locked dielectric resonator oscillator (PLDRO) is an essential component of millimeter-wave communication, in which phase noise is critical for satisfactory performance. The general structure of a PLDRO typically includes a dual loop of digital phase-locked loop (PLL) and analog PLL. A dual-loop PLDRO structure is generally used. The digital PLL generates an internal voltage controlled crystal oscillator (VCXO) frequency locked to an external reference frequency, and the analog PLL loop generates a DRO frequency locked to an internal VCXO frequency. A dual loop is used to ease the phase-locked frequency by using an internal VCXO. However, some of the output frequencies in each PLL structure worsen the phase noise because of the N divider ratio increase in the digital phase-locked loop integrated circuit. This study examines the design aspects of an interconnected PLL structure. In the proposed structure, the voltage tuning; which uses a varactor diode for the phase tracking of VCXO to match with the external reference) port of the VCXO in the digital PLL is controlled by one output port of the frequency divider in the analog PLL. We compare the proposed scheme with a typical PLDRO in terms of phase noise to show that the proposed structure has no performance degradation.

개선된 윔홀 라우터를 이용한 파이프라인 브로드캐스트 (Pipelined Broadcast with Enhanced Wormhole Routers)

  • 전민수;김동승
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제29권1호
    • /
    • pp.10-15
    • /
    • 2002
  • 이논문은 nckdnjs 하리퍼큐브에서 O(m+n-1) 이내에서 크기 m인 메세지를 브로드캐스트 하는 파 이프라인 브로드캐스트(pipelined broadcast)를 제안한다. 이것은 도달가능집합(reachable set)으로 부터 유도된 복제 나무(replication tree)를 이용한다. 이 브로드캐스트방식은 O(m[n/log(n+1)])의 수행시간을 갖는 Ho-Kao 의 알고리즘에 비해 성능이 크게 개선된 결과이다. 브로드개스트 통신은 메시지 복제 기능을 갖는 all-port 휨홀 라우터를 이용한다. 이 논문은 알고리즘 기술 및 실제 구현시 이전 방식들과의 성능비 교도 제시한다.