• 한국전산유체공학회지
• /
• 제21권1호
• /
• pp.94-102
• /
• 2016

The present paper deals with accuracy improvement of a bleed boundary condition model used to improve the performance of supersonic inlets. In order to accurately predict the amount of bleed mass flow rates, this study performs a scaling of sonic flow coefficient data for 90-degree bleed holes in consideration of Prandtl-Meyer expansion theory. Furthermore, it is assumed that porosity varies with stream-wise location of the porous bleed plate to accurately predict downstream boundary layer profiles. The bleed boundary condition model is demonstrated through Computational Fluid Dynamics(CFD) simulations of bleed flows on a flat plate with/without an oblique shock. As a result, the bleed model shows the improved accuracy of bleed mass rates and downstream boundary layer profiles.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.47-53
• /
• 2002

Three types of sludges including printing paper, newsprint and tissue paper were prepared at 5% concentration for filtration-expression operations. Filtration-expression characteristics of sludge were measured in different pressure and wastepaper powder dosage. Specific filtration resistance and porosity were calculated with theoretical formula. Higher pressure increased the progresses of filtration and expression while it decreased porosity. The addition of 5% wastepaper powder more accelerated the progresses of filtration and expression than that of 10% wastepaper powder. The lowest porosity value was also measured at 5% dosage of wastepaper powder. The decrease of porosity implied the decrease of moisture content in cake. The results indicated that dewatering of sludge was efficient in high pressure and 5% dosage of wastepaper powder.

• 한국분말재료학회지
• /
• 제28권1호
• /
• pp.7-12
• /
• 2021

The change in the open porosity of bulk graphite as a function of the uniaxial molding pressure during manufacturing is studied using artificial graphite powder. Subsequently, the graphite is impregnated to determine the effect of the open porosity on the impregnation efficiency and to improve the density of the final bulk graphite. Bulk graphite is manufactured with different uniaxial molding pressures after mixing graphite powder, which is the by-product of processing the final graphite products and phenolic resin. The bulk density and open porosity are measured using the Archimedes method. The bulk density and open porosity of bulk graphite increase as the molding pressure increases. The open porosity of molded bulk graphite is 25.35% at 30 MPa and 29.84% at 300 MPa. It is confirmed that the impregnation efficiency increases when the impregnation process is performed on a specimen with large open porosity. In this study, the bulk density of bulk graphite molded at 300 MPa is 11.06% higher than that before impregnation, which is the highest reported increase. Therefore, it is expected that the higher the uniaxial pressure, the higher the density of bulk graphite.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.307-316
• /
• 2019

Dam deformation should be strictly controlled for the construction of 300 m-high rockfill dams, so the rockfill materials need to have low porosity. A method of using composite grout is proposed to reduce the porosity of rockfill materials for the construction of high rockfill dams. The composite grout is a mixture of fly ash, cement and sand with the properties of easy flow and post-hardening. During the process of rolling compaction, the grout admixture sprinkled on the rockfill surface will gradually infiltrate into the inter-granular voids of rockfill by the exciting force of vibratory roller to reduce the porosity of rockfill. A visible flowing test was firstly designed to explore the flow characteristics of composite grout in porous media. Then, the compressibility, shear strength, permeability and suffusion susceptibility properties of composite grout-modified rockfill are studied by a series of laboratory tests. Experimental results show that the flow characteristics of composite grout are closely related to the fly ash content, the water-to-binder ratio, the maximum sand size and the content of composite grout. The filling of composite grout can effectively reduce the porosity of rockfill materials, as well as increase the compression modulus of rockfill materials, especially for loose and gap-graded rockfill materials. Composite grout-modified rockfill tends to have greater shear strength, larger suffusion erosion resistance, and smaller permeability coefficient. The composite grout mainly plays the roles of filling, lubrication and cementation in rockfill materials.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권6호
• /
• pp.53-63
• /
• 2010

Pneumatic fracturing is an emerging tool to enhance the remediation efficiency of contaminated unsaturated zones by injecting high pressure air and inducing artificial fracture networks. Pneumatic fracturing is reported to be well suited for the cases where the contaminated unsaturated zone thickness is less than 5 m as many contaminated domestic sites in Korea. Nevertheless, there have been almost no studies carried out on the site-specific efficiency and the optimized design of pneumatic fracturing considering the unsaturated zone characteristics of Korea. In this study, we employ numerical simulations to compare the efficiency of pneumatic fracturing on the aspect of the site remediation and the porosity improvement at several hypothetic unsaturated zones composed of four typical soil types. According to the simulation results, it is found that the zone with fine grains soil such as clay and silt shows better efficiency than the zone composed of coarse grains in terms of air flow and porosity enhancements. The results imply that pneumatic fracturing may improve the efficiency of site reclamation by jointly or independently applied to the many contaminated sites in Korea.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.415-421
• /
• 2004

The voltage profile of Zinc/Air battery during discharge has very flat pattern in a given voltage range, But, if not enough the porosity in cathode, as a result of that capacity, energy and discharge voltage of batteries become low. Therefore, we focused the pore effects in activated carbon for cathode. We examined discharge voltage, specific capacity, specific energy, resistance and characteristics during the GSM pulse discharge upon different kinds of activated carbon in Zinc/Air battery, Also we measured porosity of the air cathode according to the ASTM. So we achieved improvement of specific capacity, specific energy and discharge voltage according to increase meso pores of activated carbon. We found the optimized activated carbon material for Zinc/Air battery.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.381-386
• /
• 2007

A porous reaction bonded silicon carbide (RBSC) was fabricated by a molten Si infiltration method. The porosity and flexural strength of porous RBSC fabricated in this study were dependent upon the amount of carbon source used in the SiC/carbon preform as well as the amount of Si infiltrated into the SiC/carbon preform. The porosity and flexural strength of porous RBSC were in the range of $20 vo1.{\sim}49 vo1.%$ and $38{\sim}61 MPa$, respectively. With increase of carbon contents and molten Si for infiltration, volume fraction of the pores was gradually decreased, and flexural strength was increased. The porous RBSCs fabricated with the same amount of molten Si show less residual Si around neck with increase of carbon source, as well as a new SiC was formed around neck which resulted in the decreased porosity and improvement of the flexural strength. In addition, decrease of the porosity and increase of the flexural strength were also obtained by increase of the amount of molten Si with the same amount of carbon source. However, it was found that the flexural strength of porous RBSC depends on the porosity rather than the amount of the newly formed SiC in neck phase between SiC particles used as a starting material.

• 한국토양비료학회지
• /
• 제28권3호
• /
• pp.256-260
• /
• 1995

신개간지인 송정양토(松汀壤土)에서 토양 개량방법별로 경제성 있는 작물을 선발하기 위하여 1985년부터 4년간(年間) 대조구, 퇴비구, 심경구, 인산구, 석회구, 종합개량구등 6개 처리를 하여 옥수수, 콩, 율무, 고구마를 재배하면서 작물 수량과 토양 특성 변화를 조사한 결과는 다음과 같다. 토양의 孔隙率은 고구마구의 공극율이 가장 높았으며 개량제 시용이 없었던 4년차의 공극율이 가장 낮았다. 연차간(年次間)의 평균수량(收量)은 대조구에 비해 수량이 가장 많았던 종합개량구에서 옥수수가 132%, 콩이 29%, 율무가 49%, 고구마가 59% 증수되었다. 토양(土壤)의 개량처리(改良處理)로 각작물 수량의 평균 증수율(增收率)은 옥수수 53%, 총 15%, 율무25%, 고구마 38%이었다. 개량제 비용을 공제한 경제성분석(經濟性分析)에서는 옥수수재배시 퇴비처리구를 제외한 전작물(全作物)에서 개량제 처리는 경제성이 있었으며 고구마의 수익성이 가장 높았다.

• 대한토목학회논문집
• /
• 제26권1B호
• /
• pp.51-60
• /
• 2006

산업활동으로 인해서 발생하는 제강슬래그와 최근 선진국에서 환경개선 및 오염방지를 위한 용도로 활용하고자 활발히 연구되고 있는 제올라이트 등의 다공성 재료를 오염된 하천의 정체수역에 설치하여 저비용으로 수질을 개선시킬 수 있는 기법은 폐기물의 재이용 측면과 하천수질개선 측면에서 매우 필요하다. 현재 제철소에서 발생하는 부산물인 제강슬래그의 화학적성분은 주로 CaO, $SiO_2$, $Al_2O_3$, $Fe_2O_3$ 등으로 이루어져 있으며, 침전유발물질 및 흡착성물질이 함유되어 있다. 제강슬래그는 다공질 형태의 비표면적을 가지고 있어서 정화용 필터나 흡착재로 이용하기에 좋은 이점을 지니고 있다. 그리고 제올라이트는 양이온 교환특성, 흡착특성, 촉매특성, 탈수 및 재흡수특성 등의 이점을 지니고 있어서 축산농가의 환경개선, 도시의 생활하수의 처리, 공업폐수 처리, 음료수 수질개선, 방사성폐기물 처리 및 방사성 물질의 오염방지 등에 응용되고 있다. 그러므로 제강슬래그나 제올라이트를 Mattress/Filter의 채움재 및 수질정화용 여재로 활용함으로써 수질개선 등 효과를 동시에 얻을 수 있다. 본 연구에서는 제강슬래그와 제올라이트가 정체수역에 설치되는 Mattress/Filter시스템의 채움재로 활용할 때 공극률에 따른 수질개선효과를 파악하기 위하여 공극률을 38.6%인 P1, 45.8%인 P2 및 49.8%인 P3로 변화시켜 각각의 유입수와 유출수의 pH, DO, T-N, T-P 등을 측정하여 비교하였다. 수질개선에 사용된 Mattress/Filter시스템은 오염된 하천수가 Mattress/Filter시스템의 공극사이를 통과하면서 채움재에 형성된 다공질에 의한 여과작용과 생물막에 의한 접촉작용, 흡착작용 및 생물분해작용 등을 촉진시키는 기능을 가지고 있음을 알 수 있었다. 제강슬래그 및 제올라이트를 채움재로 사용한 Mattress/Filter 시스템은 쉽게 생물막을 형성시키고 유기물의 흡착을 촉진시켜 오염물질을 정화하는데 필요한 자정작용의 효과를 증대시키고 수질개선을 촉진시킬 수 있는 자연환경에서 하천정화에 이용될 수 있는 시스템임을 확인할 수 있었다.

• 콘크리트학회논문집
• /
• 제28권6호
• /
• pp.647-653
• /
• 2016

본 연구에서는 FA (Fly Ash)를 20%치환한 배합에 대하여 TDFA (Tire Derived Fuel Ash)를 3.0~12.0%까지 중량 치환하면서 내구성 평가를 수행하였다. TDFA는 열병합발전소에서 열효율을 높이기 위해 폐타이어를 혼소시킨 뒤 발생한 산업부산물로서 국내에서 콘크리트에 적용한 연구는 없는 상태이다. 이를 위해 물-결합재를 50%, FA를 20% 치환한 Control 콘크리트를 제조하였으며, TDFA를 치환하면서 압축강도, 촉진 탄산화 시험, 촉진염해 시험, 공극구조평가를 수행하였다. 압축강도, 탄산화, 공극구조에서는 12%까지 TDFA를 FA와 치환해도 동등이상의 성능을 확보하였다. 특히 염해에 대해서는 TDFA의 치환률의 증가에 따라 뚜렷한 염화물 확산계수의 감소를 나타내어 최종적으로 75.3~70.9%까지 염화물 확산계수가 감소하였다. TDFA를 혼입한 콘크리트 배합시, 워커빌리티의 확보가 가능하다면 TDFA를 혼입한 콘크리트는 내구성 개선에 효과적일 것으로 판단된다.