• 한국세라믹학회지
• /
• 제30권9호
• /
• pp.747-753
• /
• 1993

The investigation was carried out to study the behaviors of the pore size and porosity, the mechanical strength, the resistance to thermal spallings and slag attacks according to particle sizes of starting raw materials in porous high Alumina ceramics. This porous ceramics have been used in processing of the clean steel by the blowing of the inert gas. The required properties in the practice are the suitable pores size, the sharp pores distribution for a uniform blowing of the gas, the strong corrosion resistance to slags and molten metals and the resistance to thermal spalling. The optimized properties in porous high alumina ceramics of the specimen No. 3 was found to be the very low slag intrusion and the superior resistance to thermal spalling because of the suitable pore size of 2.5${\mu}{\textrm}{m}$, the porosity of 30% and the high sinterability.

• 한국분말재료학회지
• /
• 제27권4호
• /
• pp.325-332
• /
• 2020

In this study, the effects of kaolin addition on the properties of reticulated porous diatomite-kaolin composites are investigated. A reticulated porous diatomite-kaolin composite is prepared using the replica template method. The microstructure and pore characteristics of the reticulated porous diatomite-kaolin composites are analyzed by controlling the PPI value (45, 60, and 80 PPI) of the polyurethane foam (which are used as the polymer template), the ball-milling time (8 and 24 h), and the amount of kaolin (0-50 wt. %). The average pore size decreases as the amount of kaolin increases in the reticulated porous diatomite-kaolin composite. As the amount of kaolin increases, it can be determined that the amount of inter-connected pore channels is reduced because the plate-shaped kaolin particles connect the gaps between irregular diatomite particles. Consequently, a higher kaolin percentage affects the overall mechanical properties by improving the pore channel connectivity. The effect of kaolin addition on the basic properties of the reticulated porous diatomite-kaolin composite is further discussed with characterization data such as pore size distribution, scanning electron microscopy images, and compressive strength.

• 멤브레인
• /
• 제27권3호
• /
• pp.263-272
• /
• 2017

분리막의 기공 크기 및 분포도를 분석하기 위한 다양한 측정법이 있지만 10-50 nm 범위의 한외여과막 기공크기를 정확하게 측정하기가 까다롭다. 따라서 gas-liquid displacement porometer (GLDP)와 liquid-liquid displacement porometer(LLDP) 기공 특성 측정법 두 가지를 이용하여, 10-100 nm의 기공크기를 갖는 세 종류의 세라믹 분리막(K-100, A-100, A-20)의 기공 크기 및 분포도를 비교 분석하였다. GLDP는 한외여과막의 최대 기공크기를 측정하는데 적합한 분석법으로 확인되었고, LLDP로 측정된 평균 기공크기가 분리막의 분리 성능 결과와 더 연계되어 있었다. 또한 LLDP는 10-50 nm 범위의 기공크기를 측정하는데 적합한 기공 분석법으로 확인되었으나, GLDP 보다 낮은 정밀도와 높은 민감도를 나타내었다. 다양한 기공 특성 분석법 가운데, 최근 상용화된 LLDP 기술은 종래의 측정법으로 알지 못했던 유용한 결과들을 제공할 수 있을 것으로 기대된다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 추계학술발표논문집
• /
• pp.179-186
• /
• 2007

The best way to understand paper properties is to study paper structure. Paper is composed solid materials (pulp and other additives) and air three-dimensionally, it's important to understand pore structure of the paper. There are several method to analysis pore structure of the paper. Mercury intrusion technique is frequently used for the characterization of the porous paper, giving access to parameters such as pore size and pore distribution. But some researchers indicated mercury intrusion distorts the structure due to application of high pressure. So this paper suggest new analysis technique to pore structure of the paper. New pore analysis technique with SEM does not require high pressure, gives good resolution and measures pore structure.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.7-13
• /
• 2007

Effects of pulp type, refining and filler type on the pore characteristics and physical properties of paper were investigated. HwBKP, SwBKP and BCTMP are used to study the effect of pulp type in this study. The effects of each filler (PCC, GCC and talc) and the combination of PCC/GCC were also studied. Highest bulk, pore volume and light scattering are obtained from BCTMP and PCC. It was found that the pore size and pore volume are important in light scattering in paper structure. It was found that PCC was the most effective filler for the improvement of the bulk and light scattering because of the increase in pore volume which can scatter light, but the increase of PCC content was not so effective in the improvement of bulk.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.627-636
• /
• 2023

The essence of subgrade mud pumping under train load is the migration of fine particles in subgrade soil. The migration of fine particles will change the pore structure of overlying ballast, thus affecting the mechanical properties and hydraulic properties of ballast layer. It is of great theoretical significance and engineering value to study the effect of fine particle migration on the pore structure of ballast layer under cyclic loading. In this paper, a tailor-made subgrade mud pumping test model and an X-ray computed tomography (CT) scanning equipment were used to study the influence of migration of fine particles in subgrade soil on the pore parameters (plane porosity, volume porosity, pore distribution and pore connectivity) of overlying ballast under cyclic loading. The results show that the compression of ballast pores and the blockage of migrated fine particles make the porosity of ballast layer decreases gradually. And the percentage of small pores in ballast layer increases, while the percentage of large pores decreases; the connectivity of pores also gradually decreases. Based on the test results, an empirical model of ballast porosity evolution under cyclic loading is established and verified.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.209-216
• /
• 1995

In order to investigate the effect o green microstructure on the sintering behavior and properties of AlN ceramics, samples were prepared by slip casting and dry pressing. The slip cast samples had high green density, fine pore size and narrow pore size distribution. They showed much higher sinterability and more homogeneous sintered microstructure compared to the dry pressed samples. Both increased thermal conductivity and flexural strength for samples prepared by slip casting could be attributed to the improved microstructural homogeneity with isolated second phase(s).

• 공업화학
• /
• 제8권5호
• /
• pp.756-762
• /
• 1997

본 실험에서는 황산용액에서 전기화학적으로 금속 알루미늄판을 양극산화하여 원통형 세공구조를 갖고 있는 alumina막을 형성시켰다. 양극화에 사용된 알루미늄 시료는 전해연마, 화학연마 및 열산화와 같은 전처리 공정을 거쳐서 준비하였으며, 형성된 알루미나막의 세공분포와 두께 등을 SEM과 BET를 사용하여 조사하였다. 그 결과 산화피막이 Keller모델과 같은 기하 구조로 이루어져 있으며. 균일한 세공 분포를 지니고 있음을 볼 수 있었다. 그리고 산화막의 세공크기와 두께는 황산전해질의 농도, 반응온도 그리고 전류밀도와 같은 양극산화 공정변수에 의존함을 알수 있었다.

• 공업화학
• /
• 제9권5호
• /
• pp.729-733
• /
• 1998

은 침착된 활성탄의 표면 구조와 세공의 크기 분포등에 대하여 연구하였다. 침착물은 내부 표면에는 영향을 주지 않고 외부 표면에만 영향을 주는 것으로 나타났다. 또한 흡착 등온선은 침착되지 않은 활성탄이나 침착된 활성탄 모두 전형적인 BET 분류 type-I 임을 확인하였으며, 침착물 양이 증가할수록 흡착량이 감소하며 window blocking 현상이 나타남을 확인하였다. 침착물 양이 증가할수록 비 표면적 값은 감소하였으며, 미세세공 부피도 감소하였다. 은 침착된 활성탄의 평균 미세세공 반경은 침착물 양과는 무관하게 일정하였다.

• 지질공학
• /
• 제24권2호
• /
• pp.179-189
• /
• 2014

We analyzed the three-dimensional distribution of micropores and internal structures in both fresh and weathered granite using micro-focus X-ray computed tomography (micro-CT). Results show that the pore radius in fresh granite is mostly in the range of $17-50{\mu}m$, the throat radius is in the range of $5-25{\mu}m$, and the coordination number (CN) of pores is less than 10. In contrast, the pore radius in weathered granite is mostly in the range of $20-80{\mu}m$, the throat radius is in the range of $8-30{\mu}m$, and the CN is less than 12. In general, a positive linear relationship exists between pore radius and CN. In addition, both the size and the density of pores increase with an increasing degree of rock weathering. The size of the throats that connect the pores also increases with an increasing degree of weathering, which induces fracture propagation in rocks. Micro-CT is a powerful and versatile approach for investigating the three-dimensional distributions of pores and fracture structures in rocks, and for quantitatively assessing the degree of pore connectivity.