• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2001

Surfaces of PTFE and PVDF were modified by ion-assisted reaction (IAR) in which 1 keV $Ar^{+}$ ions were irradiated on the surface of the polymer with varying ion dose in an oxygen gas environment, and Cu, Pt, Al and Ag thin films were deposited on the modified polymers. Wettability of the modified polymers was largely improved by the formation of hydrophilic groups due to chemical reaction between polymer surface and the oxygen gas during IAR. The change in wettability in the modified polymers was also related to the change in surface morphology and roughness. Adhesion between metal films and polymers modified by IAR was significantly improved, so that no detachment was possible in the $Scotch^{TM}$ tape test. The increase of adhesion strength between the metal film and the modified PVDF was mainly attributed to the formation of hydrophilic groups, which interacted with the metal film. In the case of the modified PTFE, the enhanced adhesion to metal film could be explained by the change in surface morphology together with the formation of hydrophilic groups. The electrical properties of the metal films on the modified polymers were also investigated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.253-256
• /
• 2008

Although researches on the beams strengthened with Fiber reinforced Polymers (FRPs) have recently been conducted around the world, there are few researches on the beams with FRPs under a sustained load. This paper presents the behavior of the beams with Carbon Fiber Reinforced Polymers (CFRP) and Glass Fiber Reinforced Polymers (GFRP) under a sustained load during 300 days. Strains of steel and FRP reinforcement were measured in order to investigate the behavior of the beams. Additionally, Adjusted Effective Modulus Method (AEMM) and Ghali and Farve's method were used to predict increase in the stress and strain caused by creep and shrinkage. Through the experiment, it was found that the beam with CFRP is more effective than the beam with GFRP in terms of flexural strengthening. Compared with analytical results, it was indicated that strains of tension steels were overestimated, whereas strains of compression steels were underestimated.

• Applied Chemistry for Engineering
• /
• v.28 no.2
• /
• pp.230-236
• /
• 2017

We synthesized liquid crystalline polymers containing isosorbide group as a cholesteric derivative and methylene group for controlling the transition temperature to the liquid crystal phase. Effects of the concentration of the isosorbide group and the position of the methylene group on the properties of the liquid crystalline polymer were investigated. Among all the synthesized polymers, polymers (MnHI-x) with a methylene group in the main chain showed higher melting transition temperature and thermal stability than those (SnBI-x) with a methylene group in the side chain. All the synthesized polymers showed an enantiotropic liquid crystal phase. The polymers having 10 mol% isosorbide as a cholesteric liquid crystal phase derivative showed nematic phase, and those having 20 mol% or more isosorbide showed a cholesteric or chiral smectic phase. Thus, we can conclude that the isosorbide group plays a role as a cholesteric liquid crystal phase derivative.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.19-32
• /
• 2012

Pharmaceutical use accounts for a great part of articles and papers on crosslinking of polymers. Crosslinking of polymers used for tissue engineering and drug delivery respects non-cytotoxicity and in situ gelling. The crosslinking of polymers is aimed not only at the improvement of modulus, chemical resistance, and thermal resistance, but also at endowing them with such functions as metal adsorption, antifouling, and ion exchange via crosslinked segments. Smart polymers responding to environmental change, and cosslinking mediated by light, enzyme, natural compound and in aqueous medium in consideration of environment are being studied. Developing new polymeric materials is essential along with the pharmaceutics aiming at the longevity of 120 years old. Functionalization and property adjustment of polymers through crosslinking will be done more delicately. Hydrogels will be focused on injectable and in situ gel forming. In the coating industry crosslinking system with low non-toxicity and low energy consumption will be developed in consideration of workers and environment.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.97-107
• /
• 2006

In spite of excellent thermomechanical performance the majority of aromatic polyimides are so poor in processability due to their high backbone rigidity that their applications are greatly limited. The introduction of long side chains not only enhances their processiblity but also makes useful contribution to discovering new application fields. In this article, a variety of novel aromatic polyimides with flexible side chains were prepared either from new dimines or new dianhydrides to measure the influence of the side chains on structure and properties of the polymers and their new applications as liquid crystal alignment layers, photosensitive polymers, alternating multilayer nano-films and photoluminescent materials are discussed.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2371-2376
• /
• 2009

Three phenoxazine-based conjugated polymers, namely, the aryl substituted phenoxazine homopolymer (P1) as well as the dimeric phenoxazine-fluorene (P2) and phenoxazine-bithiophene (P3) copolymers, were synthesized via the Ni(0) mediated Yamamoto reaction and the palladium-catalyzed Suzuki coupling reaction. The weight-averaged molecular weights ($M_w$) of P1, P2, and P3 were found to be 27,000, 22,000, and 15,000, respectively, and their polydispersity indices were 3.6, 1.8, and 2.1. All the polymers were soluble in common organic solvents such as chloroform, toluene, and so on. The UV-visible absorption maxima for P1, P2, and P3 in the film state were located at 421, 415 and 426 nm, respectively, and the ionization potentials of the polymers ranged between 4.90 and 5.12 eV. All the studied phenoxazine-based polymers exhibited amorphous behavior, as confirmed by X-ray diffraction (XRD) and atomic force microscopy (AFM) studies. Thin film transistors were fabricated using the top-contact geometry. P1 showed much better thin-film-transistor performance than P2 or P3: A thin film of P1 gave a saturation mobility of 0.81 ${\times}\;10^{-3}\;cm^2V^{-1}s^{-1}$ and an on/off ratio of about $10^2$.

• Macromolecular Research
• /
• v.16 no.6
• /
• pp.510-516
• /
• 2008

New antitumor active polymers, poly(methacryloyl-2-oxy-1,2,3-propanetricarboxylic acid-co-exo-3,6-epoxy-l,2,3,6-tetrahydrophthalic acid) [poly(MTCA-co-ETAc)], poly(methacryloyl-2-oxy-l,2,3-propanetricarboxylic acid-co-hydrogen ethyl-exo-3,6-epoxy-l,2,3,6-tetrahydrophthalate) [poly(MTCA-co-HEET)], and poly(methacryloyl-2-oxy-l,2,3-propanetricarboxylic acid-co-a-ethoxy-exo-3,6-epoxy-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil) [poly(MTCA-co-EETFU)] were synthesized and characterized. Their antitumor activity, inhibition of DNA replication and antiangiogenesis were examined. The structures of the polymers were identified by FT-IR, $^1H$ and $^{13}C$-NMR spectroscopy. The number average molecular weights of the fractionated polymers determined by GPC ranged from 9,400 to 14,900, and polydispersity indices were less than 1.7. The in vitro cytotoxicity of these polymers was determined and their antitumor activity was evaluated. The $IC_{50}$ values (the drug concentration at inhibition of 50% tumor growth) indicated that the synthesized polymers were much better inhibitors of cancer cells and showed lower cytotoxicity than the free 5-FU. The in vivo antitumor activity of the conjugates was examined using mice bearing the sarcoma 180 tumor cell line. The life spans (TIC) of the mice treated with the conjugates were higher than those treated with the free 5-FU. In addition, the synthesized conjugates showed excellent antiangiogenic activity based on an embryo chorioallantoic membrane assay.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.219-225
• /
• 2019

Side-chain liquid crystalline polymers with various compositions of azobenzene and cholesteryl functional groups as the mesogenic moiety were synthesized by direct polycondensation, and their properties were investigated. The inherent viscosity values of synthesized polymers were between 0.32 and 0.38 dL/g in 1,1,2,2-tetrachloroethane. All polymers except the SP-A10C0 polymer containing only the azobenzene group were amorphous or exhibited very low crystallinity due to the presence of bulky mesogenic side chains. All synthesized polymers exhibited enantiotropic liquid crystallinity; the SP-A10C0 polymer having only the azobenzene group exhibited a nematic phase, and all other polymers showed a cholesteric phase. In particular, it was found that when the content of cholesteryl groups in the side chain of the polymer increases, the liquid crystallinity decreases due to the bulkiness of cholesteryl groups.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.371-378
• /
• 2021

The formation of hydrophilic surface based on polymers has received great attention due to the anti-adhesion of bacteria on solid substrates. Anti-adhesion coatings are aimed at suppressing the initial step of biofilm formation via non-cytotoxic mechanisms, and surfaces applied hydrophilic or ionic polymers showed the anti-adhesion effect for bioentities, such as proteins and bacteria. This is attributed to the formation of surface barrier from hydration layers, repulsions and osmotic stresses from polymer brushes, and electrostatic interactions between ionic polymers and cell surfaces. The antifouling polymer coating is usually fabricated by the grafting method through the bonding with functional groups on surfaces and the deposition method utilizing biomimetic anchors. This mini-review is a summary of representative antifouling polymers, coating strategies, and antibacterial efficacy. Furthermore, we will discuss consideration on the large area surface coating for application to public facilities and industry.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.273-283
• /
• 2024

As the adverse environmental impacts due to plastic waste become more severe, there is an increasing demand for developing a sustainable ecosystem using biodegradable polymers. Biodegradable polymers are those that can be biochemically decomposed through the enzymatic activity of microorganisms. Currently, a variety of biodegradable polymers with varying properties is being investigated. In particular, polymer blends with an aim to control the biodegradation rate and mechanical properties are under active research. The biodegradable polymer industry, which has not yet reached economies of scale, does not have a cost advantage compared to petroleum-derived polymers. To overcome this challenge, there is an urgent need to expand its application fields to various high-value industries (separators, electronic materials, and medical fields). This review summarizes the current state-of-the-art biodegradable polymers, polymer blends, and recent research trends in new niche applications.