• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.118-122
• /
• 2009

Organic thin film transistors with a pentacene active layer and various polymer gate insulators were fabricated and their performances were investigated. Characteristics of pentacene thin film transistors on different polymer substrates were investigated using an atomic force microscope (AFM) and x-ray diffraction (XRD). The pentacene thin films were deposited by thermal evaporation on the gate insulators of various polymers. Hexamethyldisilazane (HMDS), polyvinyl acetate (PVA) and polymethyl methacrylate (PMMA) were fabricated as the gate insulator where a pentacene layer was deposited at 40, 55, 70, 85, 100 oC. Pentacene thin films on PMMA showed the largest grain size and least trap concentration. In addition, pentacene TFTs of top-contact geometry are compared with PMMA and $SiO_2$ as gate insulators, respectively. We also fabricated pentacene TFT with Poly (3, 4-ethylenedioxythiophene)-Polysturene Sulfonate (PEDOT:PSS) electrode by inkjet printing method. The physical and electrical characteristics of each gate insulator were tested and analyzed by AFM and I-V measurement. It was found that the performance of TFT was mainly determined by morphology of pentacene rather than the physical or chemical structure of the polymer gate insulator

• Macromolecular Research
• /
• v.16 no.4
• /
• pp.367-372
• /
• 2008

We fabricated tetra(5-n-nonyl-8-tert-butyl-2,3-pyrazino[2,3-b]indolo)porphyrazinato copper(II) (Cu-Pc-$C_8$) Langmuir-Blodgett (LB) films. We further investigated the influence of arachidic acid (AA) as a transfer promoter, as well as the effect of dipping speed, on the deposition of the films on hydrophilic and hydrophobic substrates. In the case of pure Cu-Pc-$C_8$ LB deposition on a hydrophilic substrate, the transfer ratio was close to one for up-stroke depositions, but the previously deposited film was peeled off and re-spread onto water at down-stroke depositions. Whereas the stability of the Cu-Pc-$C_8$ LB films was not improved by AA addition on hydrophilic substrates, the deposition of Cu-Pc-$C_8$ was significantly improved by the presence of AA on a hydrophobic substrate. The AA-assisted deposition had transfer ratio of close to 1 and was essentially stable up to 10-layer depositions. Comparison of the UV-visible spectrum of a Cu-Pc-$C_8$/AA LB film with that of Cu-Pc-$C_8$/AA solution in dichloroethane revealed that the Soret and Q bands for the Cu-Pc-$C_8$/AA LB film were broadened and red-shifted due to the aggregation of phthalocyanines upon assembly in the LB film.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.220-225
• /
• 2010

The optical properties and dimensional stability of polyethersulfone(PES) retardation film have been studied as function of chain orientation and the temperature applied to PES retardation film. It was confirmed that the appropriate retardation values of $R_e$ and $R_{th}$ for the retardation film application were able to obtain by the chain orientation and these values could be controlled by the chain relaxation through the thermal annealing process. It was found that unstable $R_e$ and $R_{th}$ values were shown by the repeated cooling and heating applied to the retardation films but this could be stabilized by means of the annealing process after stretching of PES film. The dimensional shrinkage due to the chain orientation was found as temperature increase and the intrinsic thermal expansion of PES appeared after shrinking. The shrinkage of PES films affected by the chain orientation and thermal annealing dramatically but the effect on the coefficient of thermal expansion was found to be negligible.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.90-96
• /
• 2000

Organic electroluminescent (EL) device was fabricated with Alq$_3$ as an emitting material and PDPMA ultra thin film prepared by Langmuir-Boldgett technique as a polymer hole transport layer. A stable condensed PDPMA monolayer was obtained using arachidic acid as a surface active material. The thickness and absorbance of PDPMA LB film increased line-arly with the layer numbers. The organic multilayered device consisted of ITO/PDPMA LB film (19 layers)/Alq$_3$/Al emitted green light with brightness of 2500 cd/m$^2$ at a DC 14 V Especially, the drive voltage of EL device having PDPMA LB film of 15 layers exhibited the value as low as 4 V. The effects of thickness control and molecular orientation in the PDPMA LB film on EL performance were discussed.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.478-482
• /
• 2008

The effect of 1,3-dioxolane on the structural development in the optical polycarbonate film was studied. The 1,3-dioxolane was used as an environmental friendly solvent for manufacturing solution-cast polycarbonate film instead of methylene chloride. The evaporation rate in film drying process decreased due to the high boiling temperature of 1,3-dioxolane. This caused the crystallization in the polycarbonate film. As a result, The increase of crystallinity and roughness led to the decrease of light transmissivity. It was also found that the lowering of mechanical properties in polycarbonate film was attributed to the morphological change due to the solvent evaporation rate in film drying process.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.293-293
• /
• 2006

Self-assembled nanostructures of block copolymer thin films have gathered significant attention due to their potential applications as templates for nanofabrication. However the lack of a robust strategy to control the structure formation in thin film geometries has been considered a major obstacle for the practical application. In this presentation 'epitaxial self-assembly' will be introduced as a successful strategy to control the self-assembled nanostructure of block copolymer. Chemically patterned surfaces prepared by advanced lithographic techniques successfully registered nanodomains in block copolymer thin film without any single defect over an arbitrarily large area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1455-1458
• /
• 2008

Amorphous silicon (a-Si:H) thin-film transistors (TFTs) are fabricated on flexible organic polymer foil substrates. As-fabricated performance, electrical bias-stability at elevated temperatures, electrical response under mechanical flexing, and prolonged mechanical stability of the TFTs are studied. TFTs made on plastic at ultra low process temperatures of $150^{\circ}C$ show initial electrical performance like TFTs made on glass but large gate-bias stress instability. An abnormal saturation of the instability against operation temperature is observed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.826-828
• /
• 2003

With a new PDP transparent dielectric layer formation technique, we were able to make dielectric layer with high transmittance by using dry film type dielectric material. We optimized dielectric pastes for dry film and they showed good process properties in lamination , drying and firing.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.79-79
• /
• 2010

In this work a PMTA(poly m-phenylene terephthal amide) polymer was synthesized by using new solvent to produce film composite. This Film composite membrane based on PMTA were prepared with 1,3-phenylenediamine(MPD), terephthaloyl chloride (TPC) and Co-solvent (NMP with added $CaCl_2$) was adopted for synthesize PMTA polymer. A series of synthetic experiments were done, aimed to find the optimum condition of polymerization.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4093-4097
• /
• 2012

We introduced a new UV-cured resin polymer gel as an electrolyte for dye-sensitized solar cells (DSSCs) that is cured with UV irradiation to form a thin film of UV-cured resin polymer gel in the cells. The gel film was characterized and its potential for use as an electrolyte in DSSCs was investigated. This new UV-cured resin polymer gel was successfully applied as a gel polymer electrolyte in DSSCs overcoming the problems associated with the liquid electrolytes in typical DSSCs. The effect of ${\gamma}$-butylrolactone (GBL) on the long-term stability and photovoltaic performance in DSSCs using this UV-cured resin polymer gel electrolyte was also investigated. The results of the energy conversion efficiency, ionic conductivity and Raman spectra of the UV-cured resin polymer gel electrolyte with the addition of 6 wt % GBL to the UV-cured resin polymer electrolyte showed good long-term stability and photovoltaic performance for the DSSCs with the UV-cured polymer gel electrolyte.