• Macromolecular Research
• /
• 제16권2호
• /
• pp.113-119
• /
• 2008

A series of amphiphilic dendrons n-18 (n: generation number, 18: octadecyl chain) based on an aliphatic polyether denderitic core and octadecyl peripheries were synthesized using a convergent dendron synthesis consisting of a Williamson etherification and hydroboration/oxidation reactions. This study investigated their thermal and self-assembling behavior in the solid state using differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) absorption spectroscopy, and small angle X-ray scattering (SAXS). DSC indicated that the melting transition and the corresponding heat of the fusion of the octadecyl chain decreased with each generation. FT-IR showed that the hydroxyl focal groups were hydrogen-bonded with one another in the solid state. DSC and FT-IR indicated microphase-separation between the hydrophilic dendritic cores and hydrophobic octadecyl peripheries. SAXS data analysis in the solid state suggested that the lower-generation dendrons 1-18 and 2-18 self-assemble into lamellar structures based upon a bilayered packing of octadecyl peripheries. In contrast, the analyzed data of higher-generation dendron 3-18 is consistent with 2-D oblique columnar structures, which presumably consist of elliptical cross sections. The data obtained could be rationalized by microphase-separation between the hydrophilic dendritic core and hydrophobic octadecyl peripheries, and the degree of interfacial curvature associated with dendron generation.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.321-328
• /
• 2018

Wet polyurethane resin was synthesized by using polytrimethylene ether glycol prepared from 1,3-propanediol produced by fermentation from corn sugar as bio polyol and polyether-polyol(PTMG). Physical properties and cell characteristics by wet coagulation were investigated using the synthesized wet polyurethane resin. The tensile strength of wet polyurethane resin decreased with increasing content of bio polyol as copolymer polyol, but it tended to increase elongation at break and tear strength. As a result of thermal characteristic analysis, it was found that the glass transition temperature was slightly increased as the content of bio polyol increased. As a result of comparing the cell characteristics by the wet coagulation method, it was found that the shape of the cell was good when the ether polyol and the bio polyol were used alone.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.210-217
• /
• 2022

Chemical warfare agents(CWA) such as nerve agents and vesicating agents show lethality by skin contamination. Skin protection, therefore, is one of the top priorities to deal with the growing threat from CWA. In an attempt to develop the most effective topical skin protectant(TSP), candidate substances including PFPE(perfluorinated polyether), PTFE(polytetrafluoroethylene), glycerin, and polysaccharides were evaluated in forms of various formulations against nerve agent simulant DMMP(dimethylmethyl phosphonate) penetration. The protective efficacy of the formulation against DMMP penetration was estimated as the onset time of color change of the KM9 chemical agent detection paper. Based on this study, it was found that several PFPE- and glycerin-based formulations exhibit remarkably superior efficacy as a protective cream. This protective cream is expected to be used as TSP for military application after further research.

• 폴리머
• /
• 제39권2호
• /
• pp.338-345
• /
• 2015

폴리페닐렌옥사이드(PPO)와 폴리에테르이미드(PEI)에 대해 각각 설폰화(SPPO) 및 아민화(APEI) 반응이 이루어졌다. SPPO와 APEI의 특성평가를 위하여 FTIR, 열무게분석(TGA), 팽윤도, 이온교환용량(IEC) 및 이온전도도 등에 대한 측정을 하였다. 표면불소화를 실시한 후 표면불소화된 SPPO와 APEI 막과 불소화하지 않은 막과의 차이점을 알아보기 위하여 위에서 실시한 특성평가를 다시 수행하여 비교하였다. SPPO막의 이온교환용량을 고정시킨 후 APEI의 이온교환용량을 변경하면서 전체적으로 3개 유형의 바이폴라막을 제조하였고, 이를 차염소산 발생을 위하여 여러 전류밀도 하에서 저농도 및 고농도 소금용액에 적용하였다. 표면불소화된 막의 차염소산 생성 농도는 APEI의 이온교환용량에 의존하며 $80mA/m^2$에서 차염소산 농도 491-692 ppm의 결과를 얻었으며, $5mA/m^2$에서 18-28 ppm의 차염소산 농도를 나타내었으며 내구성이 매우 상승된 것을 보여 주었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1549-1550
• /
• 2013

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.29-32
• /
• 1998

Segmented block copolyetheresters defined as copolymers having sequences of alternating polyester hard blocks and polyether soft blocks create labile physical cross-links upon crystallization of hard polyester blocks Since the nature of the physical interlocking is a crystallite formed exclusively from the crystallizable hard segment, the basic understanding of interrelationship between crystallization condition and phase morphology is very important for the property control of the segmented block copolyetheresters. (omitted)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.232-235
• /
• 1998

ion conducting polymers have been extensively investigated because of their potential application as an electrolyte in solid state batteries [1]. Among the polymer electrolytes, solid polymer electrolytes (SPEs) composed of ion conducting polymer and alkali metal salt have many advantages such as high ionic conductivity, high energy density and light weight. This made them suitable replacement for liquid electrolytes. (omitted)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.33-36
• /
• 1998

Segmented block copolyetheresters defined as copolymers having sequences of alternating polyester hard blocks and polyether soft blocks create labile physical cross-links upon crystallization of hard polyester blocks Since the nature of the physical interlocking is a crystallite formed exclusively from the crystallizable hard segment, the hard segment content (HSC) and hard segment length (HSL) will play an important role in determining the properties such as mechanical property and dynamic mechanical property. (omitted)

• 대한화학회지
• /
• 제6권1호
• /
• pp.19-24
• /
• 1962

In the emulsion polymerization of vinyl acetate with Triton-X(Alkyl-aryl-polyether alcohol) and polyvinyl alcohol as emulsifier, some relations between the conditions of polymerization and the polymerization rate, polymerization degree and stability of the emulsion are studied and discussed.

• 한국잠사학회:학술대회논문집
• /
• 한국잠사학회 1997년도 Progress and Future Development of Sericultural Science and Technology 40th Anniversary Commemoration Symposium
• /
• pp.159-169
• /
• 1997

ABA-type(or AB) block copolymers composed of poly(${\gamma}$-alkyl L-glutamate) (PALG)[or poly(L-leucine)] as the A component and polyether[or poly (N-isopropy1 acrylamide) as the B component were synthesized by polymerization of (${\gamma}$-alkyl L-glutamate N-carboxyanhydride initiated by primary amined located at both(or one) ends of the polymer chains. Structural studies of the block copolymers were performed in the solution and solid state. Also, artificial skin, drug delivery system of the block copolymers and cell attachment onto the copolymer were carried out for biomedical applications.