• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.715-723
• /
• 2007

The air pollutant emission is mainly caused by line sources in urban area. For example, the annually totaled air pollutant emission is known to consist of about 80% of line sources in Daegu. Hence, the appropriate assessment on the air pollutants of line sources is very important for the atmospheric environmental management in urban area. In this study, we made a comparative study to evaluate suitable dispersion model for estimating the air pollution from line sources. Two air pollution dispersion models, ISCST3 and CALINE4 were the subject of this study. The results were as follows; In the assessment of air pollution model, ISCST3 was found to have 4 times higher concentration than CALINE4. In addition, actual data obtained by measurement and estimated values by CALINE4 were generally identical. The air pollution assessment based on ISC3 model produced significantly lower values than actual data. The air pollution levels estimated by ISCST3 were very low in comparison with the observational values.

• Journal of Environmental Science International
• /
• v.11 no.9
• /
• pp.933-943
• /
• 2002

The urban pollution if affected by local environmental, so it is necessary to consider area characteristics such as emission source and meteorological phenomena, in studying urban air pollution. Ulsan is laocated on south-east coast and has many industrial facilities, so many people have concerned about air pollution. This study contain conducting numerical simulation of air pollutant concentration considered land and sea breeze in Ulsan area with the numerical model.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.562-572
• /
• 2015

$NO_x$ emissions from diesel vehicles have been regarded as a main cause of high $NO_2$ concentration in metropolitan area. Recent studies have shown that the on-road $NO_x$ emissions of diesel vehicles are quite higher than the emission limits specified with the pre-defined test method for emission certification. To reduce air pollutants effectively, the discrepancy of emissions in certification and real-driving conditions should be tackled. In this study, the real-driving emissions have been estimated with portable emission measurement system (PEMS). The results of this study have shown that the on-road $NO_x$ emissions from diesel vehicles have been decreased as the introduction of stricter emission regulation, EURO-6, but additional reduction should be still required and robust technologies should be applied to control $NO_x$ in real-driving conditions. RDE-LDV (Real Driving Emission - Light Duty Vehicles) test method being developed in the European Union can represent excessive on-road $NO_x$ emissions of diesel vehicles as applied emission technologies and can be a solution to remove discrepant $NO_x$ emissions between certification and Korean real-driving conditions. Among the $NO_x$ reduction technologies for EURO-6 diesel vehicles, selective catalytic reduction (SCR) system has shown the better performance than lean $NO_x$ trap (LNT) system to control on-road $NO_x$ emissions. Implementing RDE-LDV will require vehicle manufacturers to adopt the more effective $NO_x$ reduction technology in real driving conditions.

• Journal of Climate Change Research
• /
• v.3 no.4
• /
• pp.235-243
• /
• 2012

Mobile sources are one of the most significant contributors to the inventory of greenhouse gas (GHG). The administration in Korea has set a goal of cutting GHG emissions of vehicles by 34.3% compared to Business As Usual (BAU) by 2020. To achieve this goal, GHG emission standards for vehicles have been applied since 2012, and now light-duty trucks are under consideration to be included to the vehicle types that will be regulated in the new version of GHG emission standards. Therefore, this study focuses on analyzing characteristics of exhaust GHGs (CO2, CH4, and N2O) emissions of diesel light-duty trucks according to their various driving modes. GHGs emissions of diesel light-duty trucks reduced in inverse proportion to the speed of the vehicles. GHGs emissions from the combined mode were 8% and 14% lower than those from the CVS- 75 and NEDC modes, respectively.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.4
• /
• pp.221-226
• /
• 2008

Air pollution associated with the SOx emission from the shipboard propulsion and generation engines is becoming one of the major environmental concerns these days. Lead by the international organizations including IMO and European Union, a significantly strengthened air pollution related regulations have been introduced and they are becoming in practice as scheduled. Such rules are basically giving the guidelines for permissible SOx emission which can be only met by using high quality fuel oils with less sulfur content or operating scrubbing systems aiming at reducing SOx at the engine exhaust. Since both countermeasures can lead to the cost increase in ship building and operation, Korean shipbuilding industries, leading the world's market, need to be well aware of the ever changing regulations and be prepared with proper solutions. Here, we briefly summarize such latest rules and regulations on the air pollution at sea, and review some technical issues on the scrubbing systems available with some suggestions.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1465-1474
• /
• 2013

In this paper, air pollutant tracing models using perceptron neural network(PNN) and non-negative least square(NNLS) are proposed. When the measured values of the air pollution and the contribution concentration of each source by chemical transport modeling are given, they estimate and trace the amount of the air pollutants emission from each source. Two kinds of emissions data are used in the experiments : CH4 and N2O of Geumgo-dong landfill greenhouse gas, and PM10 of 17 areas in Northeast Asia and eight regions of the Korean Peninsula. Emission values were calculated using pseudo inverse method, PNN and NNLS. Pseudo inverse method could be used for the model, but it may have negative emission values. In order to deal with the problem, we used the PNN and NNLS methods. As a result, the estimation using the NNLS is closer to the measured values than that using PNN. The proposed tracing models have better utilization and generalization than those of conventional pseudo inverse model. It could be used more efficiently for air quality management and air pollution reduction.

• Journal of the Korean Institute of Rural Architecture
• /
• v.7 no.3
• /
• pp.9-18
• /
• 2005

The environment in which we live is changing at an accelerated rate according to the needs of times, concrete structures are increasing daily responding to this advanced lifestyle as a result of demolition and construction. The production of noise and vibration during demolition work on these concrete structures has a major negative influence on the present environment in which we live. As a result, controls on this form of pollution are being strengthened. The aim of this study is to analyze and investigate zero - emission for decrease of environmental pllution in architecture construction field.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.201-204
• /
• 2015

Recently, energy excessive consumption and environmental pollution are the social issued. The most efficient way to solve both energy excessive consumption and environmental pollution is existing combustion system improved. This study was part of the assume and commercial used existing waste heat recovery condensing boiler to low emission performance for exhaust gas recirculation(EGR) and thermal efficiency rise by applying the condensed water recirculation(CWR) conducted. The researchers applied the EGR and CWR develop a new concept for the condensed water recirculation waste heat recovery condensing boiler. Waste heat recovery condensing boiler applied to the condensed water recirculation thermal efficiency of the same conditions was increased by about 4.8~5.5% and pollution emission also decreased.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.130-138
• /
• 2015

Despite of recently strengthened vehicle emission regulations, NOx emissions are not decreased in urban areas because of discrepancies between certification emission test modes and real driving conditions. Thus, researches on RDE-LDV (Real-driving Emission-Light-duty Vehicle) have been conducted actively using PEMS (Portable Emissions Measurement Systems). In the present study, NOx emissions were measured for 5 Korean light duty vehicles for real driving conditions including city, combined, highway, and up-downhill test route. Emission characteristics were analyzed for averaged NOx emissions per unit driving distance of each driving test routes. Furthermore, MAW (Moving Average Window) method based on $CO_2$ emissions from WLTC, which will be supported for EU regulations, was utilized. It was revealed that DRs (deviation ratios) for diesel vehicles (i.e., 5.1 ~ 8.4) were greater than gasoline vehicles (less than 0.15). Especially DR of diesel vehicle for up-downhill test route was 8.4, which indicates severe NOx emissions.

• Environmental and Resource Economics Review
• /
• v.29 no.1
• /
• pp.23-45
• /
• 2020

The rapid economic growth has brought tremendous pressure on the environment and caused severe air pollution in China. This study empirically examines causes of air pollution in China. Panel-corrected standard errors procedure (PCSE) was used to analyze major determinants of increasing or reducing emissions of sulfur dioxide (SO₂) and nitrogen oxides (NO_X) in 30 Chinese provinces. The estimation results show that SO₂ emission is mitigated as per capita regional GDP increases, but the relation between emission of NO_X and per capita regional GDP is found to have an inverse N-shaped curve, which implies that emission of NO_X is ultimately expected to decline with economic growth. As for increasing factors of air pollutants, electricity consumption is a significant common source of SO₂ and NO_X emissions. Moreover, the results show that increment of coal consumption significantly affects emission of SO₂ while increase of natural gas consumption reduce emission of SO₂. On the other side, investment in energy industry, and investment on treatment of waste gases are determinants of mitigating emissions of SO₂, but have no impact on NO_X. Consumption of diesel, truck ratio and number of vehicles increase emission of NO_X. Meanwhile, higher precipitation rate is a common determinant of mitigating emissions of SO₂ and NO_X. Policy implications are suggested in the conclusion.