DOI QR코드

DOI QR Code

Estimation of Real-Driving NOx Emission Characteristics from Light-Duty Diesel Vehicles with PEMS

PEMS를 이용한 소형 경유차의 실주행 NOx 배출특성 평가

  • Park, Yeon Jae (Environmental Transportation Division, Ministry of Environment) ;
  • Kwon, Sang Il (Transportation Pollution Research Center, National Institute of Environmental Research) ;
  • Park, Jun Hong (Transportation Pollution Research Center, National Institute of Environmental Research) ;
  • Lee, Jai Young (Department of Environmental Engineering, University of Seoul)
  • 박연재 (환경부 교통환경과) ;
  • 권상일 (국립환경과학원 교통환경연구소) ;
  • 박준홍 (국립환경과학원 교통환경연구소) ;
  • 이재영 (서울시립대학교 환경공학과)
  • Received : 2015.07.22
  • Accepted : 2015.10.05
  • Published : 2015.12.31

Abstract

$NO_x$ emissions from diesel vehicles have been regarded as a main cause of high $NO_2$ concentration in metropolitan area. Recent studies have shown that the on-road $NO_x$ emissions of diesel vehicles are quite higher than the emission limits specified with the pre-defined test method for emission certification. To reduce air pollutants effectively, the discrepancy of emissions in certification and real-driving conditions should be tackled. In this study, the real-driving emissions have been estimated with portable emission measurement system (PEMS). The results of this study have shown that the on-road $NO_x$ emissions from diesel vehicles have been decreased as the introduction of stricter emission regulation, EURO-6, but additional reduction should be still required and robust technologies should be applied to control $NO_x$ in real-driving conditions. RDE-LDV (Real Driving Emission - Light Duty Vehicles) test method being developed in the European Union can represent excessive on-road $NO_x$ emissions of diesel vehicles as applied emission technologies and can be a solution to remove discrepant $NO_x$ emissions between certification and Korean real-driving conditions. Among the $NO_x$ reduction technologies for EURO-6 diesel vehicles, selective catalytic reduction (SCR) system has shown the better performance than lean $NO_x$ trap (LNT) system to control on-road $NO_x$ emissions. Implementing RDE-LDV will require vehicle manufacturers to adopt the more effective $NO_x$ reduction technology in real driving conditions.

Keywords

References

  1. Choi, K.J., J.H. Park, J.T. Lee, J.S. Kim, and K.J. Lee (2012) Research on Domestic Driving Pattern for International Standardization of Light-duty Vehicles Emission Test Method, J. Korean Soc. Transp., 30(1), 7-19. (in Korean with English abstract) https://doi.org/10.7470/jkst.2012.30.1.007
  2. Competitive Automotive Regulatory System (2012) CARS21 High Level Group, On the Competitiveness and Sustainable Growth of the Automotive Industry in the European Union, Final Report, 60-62.
  3. Ericsson, E. (2001) Independent driving pattern factors and their influence on fuel-use and exhaust emission factors, Transport. Res. Part D: Transport. Environ., 6, 325-345. https://doi.org/10.1016/S1361-9209(01)00003-7
  4. European Commission (2011) Implementing and Amending Regulation (EC) No. 595/2009 of the European Parliament and of the Council with Respect to Emissions from Heavy Duty Vehicles (EURO VI) and Amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council, Regulation (EC) No. 582/2011.
  5. European Commission-Joint Research Center (2011) Analyzing On-road Emissions of Light duty Vehicles with Portable Emissions Measurement Systems (PEMS), JRC Scientific and Technical Reports, EUR 24697 EN.
  6. European Commission-Joint Research Center (2013) A complementary emissions test for light-duty vehicles: Assessing the technical feasibility of candidate procedures, Conclusions of the Real-Driving Emissions-Light Duty Vehicles (RDE-LDV) working group, JRC Scientific and Policy Reports, EUR 25572 EN.
  7. Lee, T.W., J.H. Park, S.I. Kwon, J.T. Lee, and J.S. Kim (2013) Variability in operation-based $NO_x$ emission factors with different test routes, and its effects on the realdriving emissions of light diesel vehicles, Sci. Total Environ., 461-462, 377-385. https://doi.org/10.1016/j.scitotenv.2013.05.015
  8. National Institute of Environmental Research (2012a) The study on emission characteristics of diesel vehicle on various driving condition NIER-RP2012-203.
  9. National Institute of Environmental Research (2012b) Introduction of In-use Compliance Test for Heavy Duty Vehicles (II), Utilizing PEMS (Portable Emission Measurement System) NIER-RP2012-201. (in Korean with English abstract)
  10. National Institute of Environmental Research (2014) Clean Air Policy Modeling System.
  11. Park, J.H., J.T. Lee, T.W. Lee, J.S. Kim, and J.H. Kil (2012) An Analysis on the Emission Reduction Effect of Diesel Light-duty Truck by Introducing Electronic Toll Collection System on Highways, J. Korean Soc. Atmos. Environ., 28(5), 506-517. (in Korean with English abstract) https://doi.org/10.5572/KOSAE.2012.28.5.506
  12. Park, J.H., J.T. Lee, S.M. Kim, J.S. Kim, and K.W. Ahn (2013) A Study on the Emission Characteristics of Korean Light-duty Vehicles in Real-road Driving Conditions, Transaction of KSAE, 21(6), 123-134 (in Korean with English abstract) https://doi.org/10.7467/KSAE.2013.21.6.123
  13. Seoul Metropolitan Government (2015) Seoul Air Quality Information, http://cleanair.seoul.go.kr
  14. US EPA (2005) Control of Emissions of Air Pollution from New Motor Vehicles; In-use Testing for Heavy-duty Diesel Engines and Vehicles, Federal Register, 70(113), 34594-34626, 2005.
  15. Weiss, M., P. Bonnel, R. Hummel, A. Provenza, and U. Manfredi (2011) On-road Emissions of Light duty Vehicles in Europe, Environmental Science and Technology, 45, 8575-8581. https://doi.org/10.1021/es2008424

Cited by

  1. Emission Factor of Hazardous Air Pollutants in Gas-phase from Light Commersial Vehicle using PEMS on Real-road Driving vol.34, pp.2, 2018, https://doi.org/10.5572/KOSAE.2018.34.2.191