• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.212-217
• /
• 1993

In this paper, characteristics of the motions of a human arm are investigated experimentally. When the conditions of the target point are restricted, human adjusts its trajectory and velocity pattern of the arm to fit the conditions skillfully. The purpose of this work is to examine the characteristics of the trajectory, velocity pattern, and the size of the duration in the following cases. First, we examine the case of point-to-point motion. The results are consistent with the minimum jerk theory. However, individual differences in the length of the duration can be observed in the experiment. Second, we examine the case which requires accuracy of positioning at the target point. It is found that the velocity pattern differs from the bell shaped pattern explained by the minimum jerk theory, and has its peak in the first half of the duration. When higher accuracy of the positioning is required, learning effects can be observed. Finally, to examine the case which requires constraint of the arm posture at the target point, we conduct experiments of a human trying to grasp a cup. It is considered that this motion consists of two steps : one is the positioning motion of the person in order to start the grasping motion, the other is the grasping motion of the human's hand approaching toward the cup and grasping it. In addition, two representative velocity patterns are observed : one is the similar velocity pattern explained in the above experiment, the other is the velocity pattern which has its relative maximum in the latter half of the duration.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.602-611
• /
• 2006

This paper proposes a locomotion pattern and a control method for biped robots with curved soles. First, since the contact point of a supporting leg may arbitrarily move back and forth on the ground, we derived the desired trajectory from a model called the Moving. Inverted Pendulum Model (MIPM) where the Zero Moment Point (ZMP) exists at the supporting point and can be moved intentionally. Secondly, a biped robot with curved soles is an under-actuated system since the supporting point contacting with a point on the ground has no actuator during the single supporting phase. Therefore, this paper proposes a computed-torque control for this under-actuated system using decoupled dynamic equations. A series of computer simulations with a 7-DOF biped robot with curved soles shows that the proposed walking pattern and control method are effective and allow the biped robot to walk fast and stably, and move more like human beings. Also, it is shown that the curved sole shape has superior energy consumption compared to flat soles, and greater efficiency in ascending and descending the stairs.

• 한국HCI학회논문지
• /
• 제5권2호
• /
• pp.15-24
• /
• 2010

디지로그 북(Digilog book)은 기존 서적과 디지털 콘텐츠을 융합함으로써, 아날로그적 감성과 디지털 오감을 함께 제공하는 증강현실기반 차세대 출판물이다. 디지로그 북을 저작할 수 있는 저작 소프트웨어인 아틀렛(ARtalet)은 증강현실 환경에서 3 차원 사용자 인터페이스를 이용한 직관적인 In-Situ 저작 환경을 제공한다. 본 논문은 디지로그 북에 증강된 3D 객체에 이동 경로를 생성하고 조작 할 수 있는, 아틀렛 저작 환경 기반의 이동 궤적 편집 기법을 제안한다. 구체적으로 이동 궤적의 조정점(Control point)을 적절히 할당하기 위해서 3차원 조작도구의 이동 좌표에 대하여 조정점 할당 검사를 한다. 그리고 부드러운 곡선 형태로 이동 궤적을 복원하기 위해서 스플라인을 이용한 보간 과정을 수행한다. 또한 작고 밀집된 이동 궤적의 조정점을 효과적으로 선택하기 위해서 동적 스코어(Score)를 기반으로 한 조정점 선택 방법을 적용한다. 실험 결과 제안한 방법은 기존 방법에 비해 오차와 완료시간은 유의한 차이가 없었지만, 조정점의 수를 약 90% 이상 감소시킬 수 있었다. 이것은 매우 적은 수의 조정점만으로도 이동궤적을 복원할 수 있으며 추후 이동 궤적 조작에 필요한 조정점의 조작 횟수를 대폭 줄일 수 있다는 것을 의미한다. 또한 제안한 방법은 기존의 조정점 조작 방법에 비해 상대적으로 적은 손과 팔의 움직임만으로도 빠르게 이동 궤적의 형태를 변경 할 수 있었다. 본 논문에서 제안한 3D 객체의 이동 궤적 편집 방법은 몰입형 In-Situ 증강현실 환경의 교육, 게임, 디자인, 애니메이션, 시뮬레이션 등의 분야에서 드로잉 또는 곡선 편집 방법으로 응용될 수 있다.

• 한국통신학회논문지
• /
• 제39C권1호
• /
• pp.47-59
• /
• 2014

본 논문은 실내 환경에서의 엔터테인먼트 활용을 목적으로 쿼드로터형 비행체를 위한 비전 기반의 궤적 추종제어 시스템을 다룬다. 항공촬영 및 감시 등의 특수임무를 완수하기 위해 자율성이 강조되는 실외 비행체와 비교할 때, 엔터테인먼트를 목적으로 하는 실내 환경에서의 비행체를 위해서는 안정성 및 정밀성이 특히 고려된 호버링 및 궤적추종 기능 등이 요구된다. 이에, 본 논문은 동작생성, 자세추정, 궤적추종 모듈로 구성된 궤적추종 제어시스템을 제안한다. 동작생성 모듈은 매 시간에서의 3차원 자세로 기술되는 동작들에 대한 연속적인 시퀀스를 생성한다. 자세추정 모듈은 비행체에 장착된 원형 링 패턴의 인식을 통해 쿼드로터의 3차원 자세정보를 추정한다. 궤적추종 모듈은 동작생성 모듈과 자세추정 모듈로부터 제공되는 정보를 이용하여 쿼드로터 비행체의 3차원 위치를 실시간적으로 제어한다. 제안된 시스템의 성능은 단일 점 추종, 다점 추종, 곡선궤적 추종에 대한 실험을 통해 평가된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.814-819
• /
• 2007

Palletizing task is well-known time consuming and laborious process in factory, hence automation is seriously required. To do this, artificial robot is generally used. These systems however, mostly user teaches the robot point to point and to avoid time-variable obstacle, robot is required to attach the vision camera. These system structures bring about inefficiency and additional cost. In this paper we propose task-oriented trajectory generation algorithm for palletizing. This algorithm based on $A^{*}$ algorithm and slice plane theory, and modify the object dealing method. As a result, we show the elapsed simulation time and compare with old method. This simulation algorithm can be used directly to the off-line palletizing simulator and raise the performance of robot palletizing simulator not using excessive motion area of robot to avoid adjacent components or vision system. Most of all, this algorithm can be used to low-level PC or portable teach pendent

• 한국분무공학회지
• /
• 제13권2호
• /
• pp.79-84
• /
• 2008

The correlations for cross-flow have not been well established, because of the complexity of breakup and atomization mechanism. A study was performed to investigate the characteristics of spray behaviour of liquid jet in the bag breakup regime injected into low-speed cross-flow with the pressure single-hole nozzle. The shadow-graphy method was used for the cross-flow jet visualization. The experimental variables of liquid jet were nozzle diameter $(0.3mm{\sim}1.0mm)$, injection pressure $(50kPa{\sim}150kPa)$, and the velocity of cross-flow $(27m/s{\sim}42m/s)$. The highest penetration trajectories of liquid jet are governed by the momentum ratio $({\rho}_{\iota}U_{\iota}^2/{\rho}_aU_{cross}^2)$ rather than the Weber number and the new empirical equations of the highest penetration trajectory and breakup point at low-speed corss-flow are established.

• 대한수학회보
• /
• 제47권1호
• /
• pp.73-79
• /
• 2010

A pair of point vortices of the same strength but opposite sign is called a vortex dipole. We consider the limiting case where two vortices approach infinitely close while the ratio of the strength to the distance kept constant. The motion of such point vortex dipole on the ellipsoid of revolution is investigated geometrically to conclude that the trajectory draws a geodesic up to the leading order of perturbation, whose direction is determined by the initial orientation of the dipole. Related issues are also remarked.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.137.3-137
• /
• 2001

Many locomotion purpose robots are being built and are under research such as mobile manipulator and biped humanoid robot, etc. Dynamic posture stability of these robots is based on the ZMP point. For getting stable ZMP trajectory, some method has been developed but is too complex and time consuming which leads to inability in generating on-line ZMP trajectory. In this paper, we give a qualitative study about behavior of ZMP in biped walking robot through visualization. This result gives intuitive understanding about behavior of ZMP under various robot state.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.72-75
• /
• 1988

Due to the fact that the set point regulation scheme by the variable structure control method concerns only the initial and final locations of a manipulator, many constraints may exist in the application of path tracking with obstracle avoidance. The variable structure parameter should be selected in the trajectory planning step by satisfying the constraints of the travel time and the path deviations This paper presents the selection algorithm of the variable structure parameters with the constraints of the system dynamics and the travel time and the path deviation. This study makes unify the trajectory planning and tracking control using the variable structure control method.

• Journal of Astronomy and Space Sciences
• /
• 제38권2호
• /
• pp.145-155
• /
• 2021

In this work, preliminary launch opportunities from NARO Space Center to the Sun-Earth Lagrange point are analyzed. Among five different Sun-Earth Lagrange points, L1 and L2 points are selected as suitable candidates for, respectively, solar and astrophysics missions. With high fidelity dynamics models, the L1 and L2 point targeting problem is formulated regarding the location of NARO Space Center and relevant Target Interface Point (TIP) for each different launch date is derived including launch injection energy per unit mass (C3), Right ascension of the injection orbit Apoapsis Vector (RAV) and Declination of the injection orbit Apoapsis Vector (DAV). Potential launch periods to achieve L1 and L2 transfer trajectory are also investigated regarding coasting characteristics from NARO Space Center. The magnitude of the Lagrange Orbit Insertion (LOI) burn, as well as the Orbit Maintenance (OM) maneuver to maintain more than one year of mission orbit around the Lagrange points, is also derived as an example. Even the current work has been made under many assumptions as there are no specific mission goals currently defined yet, so results from the current work could be a good starting point to extend diversities of future Korean deep-space missions.