• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.119-125
• /
• 2002

The temperature decrease of discharge space was very important to generate the high concentration of ozone in silent discharge type ozone generator. At this time, binding materials and methods between dielectric barrier and ground electrode affected to the discharge importantly in electrical and thermal point of view. So, above two factors become very important parameters should be considered before designing the ozone generator. In this study, binders of silicone compound, electroconductive resin and charcoal were used for variations of binders properties. Resultantly, when the binding materials were used, better ozone generation characteristics were shown(maximum ozone generation 28044［ppmV］ at 6.0［kV］) in comparison with the non-used case (maximum ozone generation 15944［ppmV］ at 4.0［kV］). In addition, when the binding materials were used, the case of pure silicone compound showed better characteristics(maximum ozone generation 28044［ppmV］ at 6.0［kV］) than the cases of conductive binding materials(maximum ozone generation 25842［ppmV］ at 5.5［kV］ and including the charcoal 5%).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.69-77
• /
• 2006

The aim of this study was to develope a fishing technology for fisheries management for improving the survival rate of young fishes escaped from trawl net. Sea experiments were carried out to investigate the survival rate of the fishes in off Geomun island and Korean southern sea. Cover-net fish cage was designed and manufactured to collect fishes escaped from COD(codend) and TED(trawl escapement device). Fish cage was installed in a shallow site where scuba diver can observe the surviving fishes after separating the cage from trawl net. Most of fishes except horse mackerel(Trachurus japonicus) and mackerel(Scomber japonicus) could escaped through TED(bar space 35mm) easier than COD(mesh size 54mm). Especially, escapement rate of redlip croaker(Pseudosciaena polyactis) escaped from TED was the highest as 73.9%. Survival rate of horse mackerel(Trachurus japonicus) escaped from TED was 85.5% at the point of 96 hours over, while the survival rate for COD showed a rapid decrease according to the time elapse as 85.0% at the point of 24 hours, 76.4% for 48 hours, 62.7% for 72 hours and 56.1% for 96 hours. Over 90% of red seabream(Pagrus major) and rock bream(Oplegnathus fasciatus) escaped from TED were survived 96 hours over and the survival rate of those fishes were excellent compared with the other fish species. All korean pomfret(Pampus echinogaster) escaped from both COD and TED were died within 48 hours. Most of redlip croaker(Pseudosciaena polyactis) were also died within 12 hours because of the weak physiological characteristics by water pressure change. Survival rate of fishes like as horse mackerel(Trachurus japonicus) having hard skin was high while it was low for the fishes like as squid(Todarodes pacificus) and hair-tail(Trichiurus lepturus) having soft skin. We could know that there were big differences in the survival rate offish species escaped from trawl net.

• Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.182-188
• /
• 1999

Production of extracellular polysaccharide by Monilinia fructigena in B-I medium containing cereals was higher than that in glucose medium. Productivities in B-I medium and glucose medium were 0.7g/l nd 0.2-03g/l respectively. The maximum content of polysaccharide occurred at the rising point from the lowest pH of culture. As the apparent viscosity of the polysaccharide solution increased, the flow Index (m) decreased, and the consistency Index (Kc) also increased. The polysaccharide solution was a typical pseudoplastic fluid. The mycelium was separated from the culture solution by $300\mu m$ mesh-filter and the polysaccharide was precipitated by adding 50% of ethanol (v/v). The amount of the polysaccharide removed from the filtrated solution was 0.45 g/l and the amount adhered to the mycelium was 0.25g/l. In experiments for investigating growth enhancement of rotifer (Brachionus plicatilis) by the polysaccharide, the dose of the polysaccharide was 1mg per 10,000 organisms of rotifer. Maximum specific growth rate of rotifer with feed consisting of sea Chlorella sp. and the polysaccharide was 1.095/day in the batch culture for 10 days. A semi-continuous culture was done for 30 days, the biomass of rotifer could be harvested twice. Maximum specific growth rate with sea Chlorella sp. and the polysaccharide was 0.734/day before the first harvest, and 1.685/day before the second harvest. Productivity was 38 $cells/ml\; \cdot\; day$ with sea Chlorella sp. and the polysaccharide.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2681-2690
• /
• 2010

This paper proposes 3D facial modeling system without using 3D scanner and camera or expensive software. This system enables efficient 3D facial modeling to cost reduction and effort saving for natural facial modeling. It detects edges of component of face using edge detection based on fuzzy logic from any 2D image of front face. It was mapped fitting position with 3D standard face model by detected edge more correctly. Also this system generates 3D face model more easily through floating and flexible control and texture mapping after fitting that connection of control point on detected edge from 2D image and mesh of 3D standard face model.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.28-38
• /
• 2008

This study was to investigate the influence of composite resins with different elastic modulus, cavity modification and occlusal loading condition on the stress distribution of restored notch-shaped noncarious cervical lesion using 3-dimensional (3D) finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity and a modified cavity with a rounded apex were modeled. Unmodified and modified cavities were filled with hybrid or flowable resin. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. The results were as follows: 1. In the unrestored cavity, the stresses were highly concentrated at mesial CEJ and lesion apex and the peak stress was observed at the mesial point angle under both loading conditions. 2. After restoration of the cavity, stresses were significantly reduced at the lesion apex, however cervical cavosurface margin, stresses were more increased than before restoration under both loading conditions. 3. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin. 4. Cavity modification the rounding apex did not reduce compressive stress, but tensile stress was reduced.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.404-411
• /
• 2009

We introduce in this paper a new method for smooth foldover-free warping of images, based on the vector field deformation technique proposed by Von Funck et al. It allows users to specify the constraints in two different ways: positional constraints to constrain the position of a point in the image and gradient constraints to constrain the orientation and scaling of some parts of the image. From the user-specified constraints, it computes in the image domain a C1-continuous velocity vector field, along which each pixel progressively moves from its original position to the target. The target positions of the pixels are obtained by solving a set of partial derivative equations with the 4th order Runge-Kutta method. We show how our method can be useful for texture mapping with hard constraints. We start with an unconstrained planar embedding of a target mesh using a previously known method (Least Squares Conformal Map). Then, in order to obtain a texture map that satisfies the given constraints, we use the proposed warping method to align the features of the texture image with those on the unconstrained embedding. Compared to previous work, our method generates a smoother texture mapping, offers higher level of control for defining the constraints, and is simpler to implement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.295-313
• /
• 2006

Statement of problem. Higher fracture rates were reported for Branemark implants placed in the maxilla and for 3.75 mm diameter implants installed in the posterior region. Purpose. The purpose of this study was to investigate the fracture of a fixture by finite element analysis and to compare different diameter of fixtures according to the level of alveolar bone resorption. Material and Methods. The single implant and prosthesis was modeled in accordance with the geometric designs for the 3i implant systems. Models were processed by the software programs HyperMesh and ANSA. Three-dimensional finite element models were developed for; (1) a regular titanium implant 3.75 mm in diameter and 13 mm in length (2) a regular titanium implant 4.0 mm in diameter and 13 mm in length (3) a wide titanium implant 5.0 mm in diameter and 13 mm in length each with a cementation type abutment and titanium alloy screw. The abutment screws were subjected to a tightening torque of 30 Ncm. The amount of preload was hypothesized as 650 N, and round and flat type prostheses were 12 mm in diameter, 9 mm in height were loaded to 600 N. Four loading offset points (0, 2, 4, and 6 mm from the center of the implants) were evaluated. To evaluate fixture fracture by alveolar bone resorption, we investigated the stress distribution of the fixtures according to different alveola. bone loss levels (0, 1.5, 3.5, and 5.0 mm of alveolar bone loss). Using these 12 models (four degrees of bone loss and three implant diameters), the effects of load-ing offset, the effect of alveolar bone resorption and the size of fixtures were evaluated. The PAM-CRASH 2G simulation software was used for analysis of stress. The PAM-VIEW and HyperView programs were used for post processing. Results. The results from our experiment are as follows: 1. Preload maintains implant-abutment joint stability within a limited offset point against occlusal force. 2. Von Mises stress of the implant, abutment screw, abutment, and bone was decreased with in-creasing of the implant diameter. 3. With severe advancing of alveolar bone resorption, fracture of the 3.75 and the 4.0 mm diameter implant was possible. 4. With increasing of bending stress by loading offset, fracture of the abutment screw was possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.8-16
• /
• 2016

This study presents the visualization of shape information based on Octree using 3D laser scanning. The process of visualization was established to construct the Octree structure from the 3D scan data. The scan data was converted to a 2D surface through the mesh technique and the surface was then converted to a 3D object through the Raster/Vector transformation. The 3D object was transmitted to the Octree Root Node and The shape information was constructed by the recursive partitioning of the Octree Root Node. The test-bed was selected as the steel bridge structure in Sungkyunkwan University. The shape information based on Octree was condensed into 89.3%. In addition, the Octree compressibility was confirmed to compare the shape information of the office building, a computer science campus in Germany and a New College in USA. The basis is created by the visualization of shape information for double-deck tunnel and it will be expected to improve the efficiency of structural health monitoring and maintenance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.69-77
• /
• 2022

The 3D spatial model is an analysis framework for solving urban problems and is used in various fields such as urban planning, environment, land and housing management, and disaster simulation. The utilization of drones that can capture 3D images in a short time at a low cost is increasing for the construction of 3D spatial model. In terms of building a virtual city and utilizing simulation modules, high location accuracy of aerial survey and precision of 3D spatial model function as important factors, so a method to increase the accuracy has been proposed. This study analyzed location accuracy of aerial survey and precision of 3D spatial model by each condition of aerial survey for urban areas where buildings are densely located. We selected Daerim 2-dong, Yeongdeungpo-gu, Seoul as a target area and applied shooting angle, shooting altitude, and overlap rate as conditions for the aerial survey. In this study, we calculated the location accuracy of aerial survey by analyzing the difference between an actual survey value of CPs and a predicted value of 3D spatial Model. Also, We calculated the precision of 3D spatial Model by analyzing the difference between the position of Point cloud and the 3D spatial Model (3D Mesh). As a result of this study, the location accuracy tended to be high at a relatively high rate of overlap, but the higher the rate of overlap, the lower the precision of 3D spatial model and the higher the shooting angle, the higher precision. Also, there was no significant relationship with precision. In terms of baseline-height ratio, the precision tended to be improved as the baseline-height ratio increased.

• Journal of Biosystems Engineering
• /
• v.32 no.6
• /
• pp.430-439
• /
• 2007

This study was carried out to(1) visualize the installation effect of an anti-wind net; (2) evaluate structural stability of typical anti-wind nets in Jeju; and (3) present the optimal specification of pipes in an anti-wind net for maximum instant wind velocities of 40 m/s and 45 m/s. The analyses were done for anti-wind nets with a mesh of 4 mm and a height of 3 m by using CFX and ANSYS. The results showed that the wind went down due to flow resistance when passing through an. anti-wind net. The anti-wind net with the supporting pipe being installed every two main columns was certainly unstable because the main column not sustained by the supporting pipe became cantilever. With regard to the position of a fixing point of the supporting pipe, von Mises stress on pipes was certainly increased as vertical positions of the supporting pipe were changed to be too lower or higher than an adequate position but there was little difference according to horizontal positions. The adequate vertical position was $2{\sim}2.5\;m$ high from the ground. For a maximum instant wind velocity of 40 m/s, the optimal specification of pipes was a main column of ${\varphi}48.1{\times}2.1$ t@2,000, cross beams(bottom and top) of ${\varphi}26.7{\times}1.9\;t$, cross beams(center) of ${\varphi}33.5{\times}2.1$ t/2ea and a supporting pipe of ${\varphi}31.8{\times}1.5$ t@2,000. In case of a maximum instant wind velocity of 45 m/s, the optimal specification of pipes with structural stability was a main column of ${\varphi}48.6{\times}3.25$ t@2,000, cross beams(bottom and top) of ${\varphi}26.7{\times}1.9\;t$, cross beams(center) of ${\varphi}48.1{\times}2.1$ t/2ea and a supporting pipe of ${\varphi}31.8{\times}1.5$ t@2,000.