Browse > Article
http://dx.doi.org/10.7848/ksgpc.2022.40.2.69

A Study on Precision of 3D Spatial Model of a Highly Dense Urban Area based on Drone Images  

Choi, Yeon Woo (Dept. of Urban Planning and Engineering, Yonsei University)
Yoon, Hye Won (Dept. of Urban Planning and Engineering, Yonsei University)
Choo, Mi Jin (Dept. of Urban Planning and Engineering, Yonsei University)
Yoon, Dong Keun (Dept. of Urban Planning and Engineering)
Publication Information
Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography / v.40, no.2, 2022 , pp. 69-77 More about this Journal
Abstract
The 3D spatial model is an analysis framework for solving urban problems and is used in various fields such as urban planning, environment, land and housing management, and disaster simulation. The utilization of drones that can capture 3D images in a short time at a low cost is increasing for the construction of 3D spatial model. In terms of building a virtual city and utilizing simulation modules, high location accuracy of aerial survey and precision of 3D spatial model function as important factors, so a method to increase the accuracy has been proposed. This study analyzed location accuracy of aerial survey and precision of 3D spatial model by each condition of aerial survey for urban areas where buildings are densely located. We selected Daerim 2-dong, Yeongdeungpo-gu, Seoul as a target area and applied shooting angle, shooting altitude, and overlap rate as conditions for the aerial survey. In this study, we calculated the location accuracy of aerial survey by analyzing the difference between an actual survey value of CPs and a predicted value of 3D spatial Model. Also, We calculated the precision of 3D spatial Model by analyzing the difference between the position of Point cloud and the 3D spatial Model (3D Mesh). As a result of this study, the location accuracy tended to be high at a relatively high rate of overlap, but the higher the rate of overlap, the lower the precision of 3D spatial model and the higher the shooting angle, the higher precision. Also, there was no significant relationship with precision. In terms of baseline-height ratio, the precision tended to be improved as the baseline-height ratio increased.
Keywords
Drone; 3D spatial model; Precision; Angle; Altitude; Overlap; Baseline-height ratio;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Cho, J.M., Lee, J.S., and Lee, B.K. (2020), A Study on the Optimal Shooting Conditions of UAV for 3D Production and Orthophoto Generation, Journal of Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 38, No. 6, pp. 645-653. (in Korean with English abstract)   DOI
2 Lee, K.R., and Lee, W.H. (2017), Comparison of Orthophoto and 3D spatial model ing using Vertical and High Oblique Images taken by UAV, Journal of Korean Society for Geospatial Information Science, Vol. 25, No. 4, pp. 35-45. (in Korean with English abstract)   DOI
3 Kim, J.S., and Hong, I.Y. (2020), Accuracy Analysis of Photogrammetry Based on the Layout of Ground Control Points Using UAV, Journal of the Korean Cartographic Association, Vol. 20, No. 2, pp. 41-55. (in Korean with English abstract)   DOI
4 Yoo, Y.H., Choi, J.W., Choi, S.K., and Jung, S.H. (2018), Quality Evaluation of Orthoimage and DSM Based on Fixed-Wing UAV corresponding to Overlap and GCPs, Journal of Society for Geospatial Information Science, Vol. 24, No. 3, pp. 3-9. (in Korean with English abstract)
5 Yun, B.Y., and Yoon, W.S. (2018), A Study on the Improvement of Orthophoto Accuracy According to the Flight Photographing Technique and GCP Location Distance in Orthophoto Generation Using UAV, Journal of the Korean Society of Industry Convergence, Vol. 21, No. 6, pp. 345-354. (in Korean with English abstract)   DOI
6 Son, S.W., Kim, D.W., Yoon, J.H., and Jeon, H.J. (2018), 3D spatial model Construction and Evaluation Using Drone in Terms of Time Efficiency, Journal of Korea Academia-Industrial cooperation Society, Vol. 19, No. 11, pp. 497-505. (in Korean with English abstract)
7 Oh, J.H., Jang, Y.J., and Lee, C.N. (2018), Accuracy Analysis of Low-cost UAV Photogrammetry for Corridor Mapping, Journal of Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 36, No. 6, pp. 565-572. (in Korean with English abstract)   DOI
8 Kim, Y.D., Park, B.W., and Lee, H.S. (2018), Accuracy Analysis According to GCP Layout Type and Flying Height in Orthoimage Generation Using Low-Cost UAV, Journal of Society for Geospatial Information Science, Vol. 26, No. 3, pp. 31-39. (in Korean with English abstract)