• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.499-503
• /
• 2009

In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated from an electrical response point of view. To analysis power line disturbance by induced contact loss phenomenon for high speed operation, a hardware Simulator which considered contact loss between contact wire and the pantograph as well as contact wire deviation is developed. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system. One of the most important needs accompanied by increasing the speed of high-speed train is reduced that an arc phenomenon by loss of contact brings out EMI. In case of a high-speed train using electrical power, as comparison with diesel rolling stock, PLD(Power Line Disturbance) such as harmonic, transient voltage and current, EMI, dummy signal injection etc usually occurs. Throughout experiment, it is verified that an arc phenomenon is brought out for simulator operation and consequently conducted noise is flowed in electric circuit by power line disturbance.

• 한국수자원학회논문집
• /
• 제35권2호
• /
• pp.161-171
• /
• 2002

일반적으로 2차원 수질모형들은 배경이론이 복잡하고 그에 따라 입력자료나 매개변수가 복잡해지며 매개변수들간의 상호영향을 인식하는 것이 매우 어렵게 되어 초보자의 경우 적절한 매개변수론 선택하기가 쉽지 않다. 따라서 본 연구에서는 2차원 수질모형내의 여러 매개변수들간의 관련성을 평가하는 민감도 분석을 기반으로한 추론기관개발과 ArcView/Avenue를 활용하여 전문가 시스템을 구축함으로써 모형의 수질매개변수를 추정하고 모의를 실시하여 정확한 해석결과를 얻을 수 있는 기법을 제시하였다. 모형의 적용 대상지역은 팔당댐 직 하류부터 한강 인도교지점에 이르는 한강구간(35.3km)을 선택하였으며, 모형수행을 위한 기본자료는 주요지류의 유입량과 오염자료를 이용하여 시스템의 적용성을 검토하였다. 그 결과 추정된 주요 매개변수는 횡확산계수 0.367, 0.074, 0.162 등으로 추정되었으며, 추정된 매개변수에 의해 계산된 수질변수는 관측치와 잘 일치하는 것으로 나타났다. 이와 같은 GIS에 근거한 매개변수 추정을 위한 전문가 시스템은 과학적인 수질관리에 많은 도움이 되는 것으로 판단된다.

• 한국전통조경학회지
• /
• 제32권3호
• /
• pp.168-182
• /
• 2014

조선시대 서촌에서는 많은 성시원림들이 만들어졌고 그들 중 다수가 진경산수화로 그려졌었다. 본 연구는 먼저, 서촌의 대표적 원림들의 위치를 보다 실증적 기법에 의하여 규명하려 하였다. 조선조 진경산수화에 나타난 원림경관을 ArcGIS 3차원 지형 모델링과 비교함으로써 사실에 근접한 위치를 밝혀내고 이에 근거하여 지형과 경관의 특징을 해석하려 하였다. 원림추정지 주변의 지형을 3차원 지형모델로 작성한 후, 조망점을 이동시켜 진경산수도와 근접한 3D 모델의 구도에서 대상지의 위치를 찾아내었다. 이후 모형에 지적도를 중첩시켜 원림 터의 지번을 확인하였다. 그 결과의 해석은 다음과 같다. 서촌의 초기 원림인 '청풍계 원림'은 인왕산 계곡의 종단부에 위치하여 외부로부터 감추어진 '위요형 경관'을 보인다. 중기원림인 '청휘각 원림'은 옥류동 계곡과 능선 사이에 위치하여 외부로 보다 개방된 '반(半)개방형 경관'을 보인다. 후기원림인 '서원 원림'은 대상지 중 가장 높은 능선 상단에 위치하여 '조망형 경관'을 보인다. 말기원림인 '송석원 원림'은 능선과 시가지의 접점 언덕에 위치하여 '개방형 경관'을 보인다. 즉, 서촌원림의 경관과 사회적 기능은 함께 점진적으로 개방되어 온 것으로 나타난다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1628-1630
• /
• 2002

In this paper, we measured 3-dimensional temporal behavior of the light emitted from discharge cell of plasma display panel(PDP) as a function of the pressure using the scanned point detecting system. The detected light signal through the PM tube is sent on the oscilloscope and oscilloscope which is connected to PC with GPIB. The whole system is controlled by a PC. From the temporal behavior results, we could analyze the discharge behavior of panel with Ne-Xe(4%) mixing gas and 300torr, 400torr, 500torr pressure. The top view of panel shows that the discharge moves from inner edge of cathode electrode to outer cathode electrode forming arc type. At the 300torr, initial emission time is very fast. The side view of panel shows that the light is detected up to $150{\mu}m$ height of barrier rib. In the panel of 300torr, emission distribution is wider than the others.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.855-859
• /
• 2014

Quality criteria for interaction between a pantograph and overhead contact wire is a most important requirement to assess of the performance for the current collection system. Interaction performance between pantograph and catenary system is subject to approval by the infrastructure manager when a new design and contraction of overhead contact line and pantograph are installed. Among the various performance, percentage of arcing at maximum line speed is a simple test method compared with contact force of pantograph due to direct sensing of pantagraph, calibrations, installations of train, and etc. On the other hand, percentage of arcing is need to reliable arcing detector and general requirements with accordance with EN 50317. In this paper, percentage of arcing are investigated on the function of duration of arc and proposed which is satiable of percentage of arcing. As a results, we proposed which duration of arcs are unsuitable from infrastructures point of view as performance testing for quality of current collection.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.399-402
• /
• 2006

This paper presents a new circuit topology of dc bus line switch-assisted half-bridge soft switching PWM inverter type dc-dc converter for arc welder. The proposed power converter is composed of typical voltage source half-bridge high frequency PWM inverter with a high frequency transformer link in addition to dc bus line side power semiconductor switching devices fer PWM control scheme and capacitive lossless snubbers. All the active power switches in the half-bridge arm and dc bus lines can achieve ZCS turn-on and ZVS turn-off commutation operation and consequently the total turn-off switching losses can be significantly reduced. As a result, a high switching frequency of using IGBTs can be actually selected more than about 20 kHz. The effectiveness of this new converter topology is proved for low voltage and large current dc-dc power supplies such as arc welder from a practical point of view.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권4호
• /
• pp.366-373
• /
• 2005

This paper presents two new circuit topologies of the dc busline side active resonant snubber assisted voltage source high frequency link soft switching PWM full-bridge dc-dc power converters acceptable for either utility ac 200V-rms or ac 400V-rms input grid. These high frequency switching dc-dc converters proposed in this paper are composed of a typical voltage source-fed full-bridge PWM inverter, high frequency transformer with center tap, high frequency diode rectifier with inductor input filter and dc busline side series switches with the aid of a dc busline parallel capacitive lossless snubber. All the active switches in the full-bridge arms as well as dc busline snubber can achieve ZCS turn-on and ZVS turn-off transition commutation with the aid of a transformer leakage inductive component and consequently the total switching power losses can be effectively reduced. So that, a high switching frequency operation of IGBTs in the voltage source full bridge inverter can be actually designed more than about 20 kHz. It is confirmed that the more the switching frequency of full-bridge soft switching inverter increases, the more soft switching PWM dc-dc converter with a high frequency transformer link has remarkable advantages for its power conversion efficiency and power density implementations as compared with the conventional hard switching PWM inverter type dc-dc power converter. The effectiveness of these new dc-dc power converter topologies can be proved to be more suitable for low voltage and large current dc-dc power supply as arc welding equipment from a practical point of view.

• 대한전기학회논문지
• /
• 제40권3호
• /
• pp.299-307
• /
• 1991

This paper deals with the determination of a firing sequence of transitions in the reachability problem of Safe Petri Net. The determination problem of a firing sequence is very important from the point of practical view, especially in the control of the discrete systems modelled by Safe Petri Net. The determination method of a firing sequence of transitions by means of the matrix equation for the discrete systems modelled by Safe Petri Net is proposed. First, a construction method of the indicence matrix and the firing rule for Safe Petri Net with self-loop are presented by defining the permissive arc in place of self-loop. Next, we develop a method that can find the enable transitions of Safe Petri Net by means of the matrix equation of Safe Petri Net. Finally, by using this method, we propose an algorithm that determines the firing sequence of transitions of Safe Petri Net.

• 한국농공학회논문집
• /
• 제48권5호
• /
• pp.3-15
• /
• 2006

The purpose of the study is to determine grid cell of radar relationship, and to promote the radar data on hydrology field. The study region is the Chungjudam basin with a drainage area of $6,648km^{2}$ located within the 260 km circle under the DWSR-88C C-band umbrella(Kwanak Mt Radar). Grid cell was produced to extract radar reflectivity and rainfall data of the same time and point using Arc-view software package. The grid cell size is to estimate mean correlation coefficient for $1km{\times}1km,\;2km{\times}2km,\;3km{\times}3km$ grid. The result of mean correlation coefficient showed good result(0.57) for the $1km{\times}1km$ grid cell. The 32 rainfall stations Z-R relationship was estimated in Chungjudam basin.

• 대한수학회지
• /
• 제57권1호
• /
• pp.145-169
• /
• 2020

Let k be a field of characteristic 0. Let ${\mathfrak{C}}=Spec(k[x,y]/{\langle}f{\rangle})$ be a weighted homogeneous plane curve singularity with tangent space ${\pi}_{\mathfrak{C}}:T_{{\mathfrak{C}}/k}{\rightarrow}{\mathfrak{C}$. In this article, we study, from a computational point of view, the Zariski closure ${\mathfrak{G}}({\mathfrak{C}})$ of the set of the 1-jets on ${\mathfrak{C}}$ which define formal solutions (in F[[t]]² for field extensions F of k) of the equation f = 0. We produce Groebner bases of the ideal ${\mathcal{N}}_1({\mathfrak{C}})$ defining ${\mathfrak{G}}({\mathfrak{C}})$ as a reduced closed subscheme of $T_{{\mathfrak{C}}/k}$ and obtain applications in terms of logarithmic differential operators (in the plane) along ${\mathfrak{C}}$.