• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1131-1137
• /
• 2015

Gallium nitride (GaN) is a promising material for next-generation high-power applications due to its wide bandgap, high breakdown field, high electron mobility, and good thermal conductivity. From a structure point of view, the vertical device is more suitable to high-power applications than planar devices because of its area effectiveness. However, it is challenging to obtain a completely upright vertical structure due to inevitable sidewall slope in anisotropic etching of GaN. In this letter, we design and analyze the enhancement-mode n-channel vertical GaN MOSFET with variation of sidewall gate angle by two-dimensional (2D) technology computer-aided design (TCAD) simulations. As the sidewall slope gets closer to right angle, the device performances are improved since a gradual slope provides a leakage current path through the bulk region.

• The Korean Journal of Pain
• /
• v.25 no.2
• /
• pp.81-88
• /
• 2012

Background: In discography performed during percutaneous endoscopic lumbar discectomy (PELD) via the posterolateral approach, it is difficult to create a fluoroscopic tunnel view because a long needle is required for discography and the guide-wire used for consecutive PELD interrupts rotation of fluoroscope. A stereotactic system was designed to facilitate the determination of the needle entry point, and the feasibility of this system was evaluated during interventional spine procedures. Methods: A newly designed stereotactic guidance system underwent a field test application for PELD. Sixty patients who underwent single-level PELD at L4-L5 were randomly divided into conventional or stereotactic groups. PELD was performed via the posterolateral approach using the entry point on the skin determined by premeasured distance from the midline and angles according to preoperative magnetic resonance imaging (MRI) findings. Needle entry accuracy provided by the two groups was determined by comparing the distance and angle measured by postoperative computed tomography with those measured by preoperative MRI. The duration and radiation exposure for determining the entry point were measured in the groups. Results: The new stereotactic guidance system and the conventional method provided similarly accurate entry points for discography and consecutive PELD. However, the new stereotactic guidance system lowered the duration and radiation exposure for determining the entry point. Conclusions: The new stereotactic guidance system under fluoroscopy provided a reliable needle entry point for discography and consecutive PELD. Furthermore, it reduced the duration and radiation exposure associated with determining needle entry.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.307-313
• /
• 2018

The respiratory function is relevant to the craniofacial growth and orthodontic diagnosis. The size of the pharyngeal airway was measured in lateral cephalometric view in children visited Kyung Hee University Hospital from January 2015 to August 2017. A total of 74 healthy children (36 boys and 38 girls) aged 7 - 11 years (mean, 8.5 years) with a normodivergent facial pattern were divided into three groups according to anteroposterior jaw relation measuring A point-Nasion-B point (ANB) angle. Lateral cephalometric data were used to measure the airway dimensions. The dimensions of the middle airway were significantly lower, reducing the upper airway space, in large ANB angle group than in other children, suggesting that children with large ANB angle have narrower airway space than others.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.174-174
• /
• 2014

Memristor devices are one of the most promising candidate approaches to next-generation memory technologies. Memristive switching phenomena usually rely on repeated electrical resistive switching between non-volatile resistance states in an active material under the application of an electrical stimulus, such as a voltage or current. Recent reports have explored the use of variety of external operating parameters, such as the modulation of an applied magnetic field, temperature, or illumination conditions to activate changes in the memristive switching behaviors. Among these possible choices of signal controlling factors of memristor, photon is particularly attractive because photonic signals are not only easier to reach directly over long distances than electrical signal, but they also efficiently manage the interactions between logic devices without any signal interference. Furthermore, due to the inherent wave characteristics of photons, the facile manipulation of the light ray enables incident light angle controlled memristive switching. So that, in the tautological sense, device orienting position with regard to a photon source determines the occurrence of memristive switching as well. To demonstrate this position controlled memory device functionality, we have fabricated a metal-semiconductor-metal memristive switching nanodevice using ZnO nanorods. Superhydrophobicity employed in this memristor gives rise to illumination direction selectivity as an extra controlling parameter which is important feature in emerging. When light irradiates from a point source in water to the surface treated device, refraction of light ray takes place at the water/air interface because of the optical density differences in two media (water/air). When incident light travels through a higher refractive index medium (water; n=1.33) to lower one (air; n=1), a total reflection occurs for incidence angles over the critical value. Thus, when we watch the submerged NW arrays at the view angles over the critical angle, a mirror-like surface is observed due to the presence of air pocket layer. From this processes, the reversible switching characteristics were verified by modulating the light incident angle between the resistor and memristor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.111-118
• /
• 2022

An electro-mechanical actuator (EMA) is an actuator that combines an electric motor with a mechanical power transmission elements, and it is suitable for urban air mobility (UAM) in terms of design freedom and maintenance. In this paper, the author presents the research results of the EMA that controls the rotor blade pitch angle of UAM. The actuator is based on an inverted roller screw and controls the blade pitch angle through a two-bar linkage. The dynamic equations for the actuator alone and the blade pitching motion with actuator were derived. For the latter, the equivalent moment of inertia is variable depending on the link angle due to the two-bar linkage. The variations of the equivalent moments of inertia are analyzed and compared in terms of the nut motion and the blade pitch motion. For an example model, the variation of the equivalent moment of inertia of the former is smaller than the latter, so it is judged that the dynamic equations derived from the point of view of the nut motion is suitable for the controller design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.709-718
• /
• 2016

The study considers viewpoints for qualitative improvement of landscape planning based on research literature, books and reports. By classifying items used in this study, evaluation criteria was derived for viewpoint selection using SPSS Statistics. In addition, we establish weights and prioritize viewpoints by measuring the relative importance within the hierarchical index. The analysis results are as follows: First, 16 viewpoints were determined using surveys from experts to establish specific and systematic plans for landscape simulation. Second, with respect to the medium classification level of viewpoint evaluation, the most important factor found was 'view' followed by 'publicness' and 'place.' Third, priority by viewpoint was found to exhibit the following order of relative importance: visual openness of viewpoint, favorability as view target, cultural property space, historicity, public place, gateway place, area where the target can be observed, thickly-populated or most-used place, place where various shapes of targets and surrounding landscape can be identified, ecological protection area, river and waterside area, viewing angle (relief-etching), viewing direction, major roads, distance between the viewpoint and the target, and plains and farmland. These results can contribute to developing systematic and reliable analysis frame for qualitative improvement of landscape planning and evaluating landscape simulation.

• Journal of Forest and Environmental Science
• /
• v.17 no.1
• /
• pp.74-87
• /
• 2001

When the revegetation of the slopes is required, it is more desirable to consider it from the ecological view point rather than from the disaster-preventive one because the environment is critical for the introduction of pioneer plants to the denuded slopes. The ecological point of view adheres to the maintenance of the present, original ecosystem of the construction area. The new revegetation technology is presented using native microorganisms and its effective usuage was discussed based on the data in the research field. Direct seeding is recommended and explained in detail than planting seedlings. The importance of inclination angle of slope face is shown for the successful revegetation from its relationship with the thickness of soil. It is indicated that the introduction of pilot plants to the slopes should include their ability to ease the acid rain effects as much as possible. Finally every construction may not be desirable for the maintenance and improvement of the global ecosystem without the consideration of the opinions mentioned above.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.1
• /
• pp.23-30
• /
• 1975

Because of the simplicity in analysis and design of steel structure, the connections of members are assumed either as perfectly hinged or rigidly fixed. However, a more economical design would result if the effect of restraint in connections were included in analyzing frame structure. From this point of view, stiffness matrices for member with bracketed connections are presented in the form of the stiffness matrices for member with variable moment of inertia, modified by a correction matrix, whose elements are functions of fixity factors of the connections. To obtain fixity factors, the displacements and stress distribution of bracketed connections are investigated by using of the degital computer program, which have been developed to make computing time shorten and the round off errors smaller. The relationship of moments and slip angle in bracketed connections are presented in the form of curves, which can be used in establishing a stiffness matrices for member with bracketed connections.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.17-20
• /
• 2001

This study is regarding the autonomous navigation of the mobile robot which operates through a sensor, the Omnnidirectional Vision System which makes it possible to retrieve the real-time movements of the objects and the walls accessing the robot from all directions and to shorten the processing time. After attempting to extend the field of view by using the reflection system and then learning the point of all directions of 2$\pi$ from the robot at the distance, robot recognizes three-dimensional world through the simple image process, the transform procedure and constant monitoring of the angle and distance from the peripheral obstacles. This study consists of 3 parts: Part 1 regards the process of designing Omnnidirectional Vision System and part 2 the image process, and part 3 estimates the implementation system through the comparative study process and three-dimensional measurements.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.4 s.9
• /
• pp.15-21
• /
• 2000

An anemometer employing the bulk PTC thermistor as the sensing element is investigated in this study. The numerical and experimental works are carried out to improve the sensitivity problem of the element by focusing fluid dynamics point of view. The typical shape of the sensing element has been used as a rectangular type, but this shape has a sensitivity problem because of flow separations on the sharp edge when the flow direction is different from that of the sensing element. In order to reduce the reading error, the installer has to be very careful about the flow direction. The reading error fluctuation by time as well as the sensitivity problem can be improved considerably through this study. It can be concluded that the small change of the sensor shape can improve the performance of the flow sensor.