• 한국통신학회논문지
• /
• 제38A권4호
• /
• pp.318-324
• /
• 2013

블라인드 채널 등화 시 신호 추정의 신뢰도는 등화기의 수렴 속도와 정상상태 성능을 결정한다. 그러므로 신호 추정에 사용되는 비선형 추정기와 기준 신호가 적절히 선택되어야 한다. 이 논문에서는 신호 추정의 신뢰도를 높이기 위해 신호 추정에 성긴 신호점과 촘촘한 신호점을 각각 적용하여 두 오차를 구하고, 두 오차의 상대적 신뢰도를 산출, 이를 활용하여 등화기를 차등적으로 적응시켰다. 이때 두 오차를 번갈아 적용하여 두 동작 모드를 완만하게 결합하였다. 모의실험을 통하여 제안 방식이 기존 방식에 비해 빠른 과도상태 수렴과 낮은 정상상태 오차를 달성하는 것을 보였다.

• 음성과학
• /
• 제11권3호
• /
• pp.157-164
• /
• 2004

Human has average pitch-level when speak naturally. That is 'Habitual pitch level'. However, if noise added at speech, the pitch-wave is changed irregularly. We can estimate noise level of speech by using this point. This paper calculates energy level of the input speech, pitch period from of above limited energy level by NAMDF (Normalized Average Magnitude Difference Function) method, after cut each frame by pitch period unit, and propose a method that estimate noise level through closed pitch of input speech.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.79.4-79
• /
• 2002

Our goal is the development of a system that estimates the location of interested point in a room with accuracy and low cost. Non-contacting position estimating method is widely used in various areas. Among these methods, acoustic signal-based method is the cheapest and provides reasonably accurate estimation as a result of many research efforts. Most of the acoustic-signal-based three-dimensional location estimators such as 3D sonic digitizer are using the ultrasound, and are organized with two procedures; time-of-flight (TOF) estimation and localization estimation. Since the errors in estimating the TOF could be accumulated with that of localization estimate, accuracy of TOF estimate is as...

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.320-325
• /
• 2009

In this study, a method to estimate the suspension bridge deflection is developed using mode decomposition technique. In order to examine the suspension bridge stability against these dynamic loadings, the prediction of displacement response is very important to evaluate bridge stability. However, it is recognized that any measurement of movement for suspension bridges may be difficult for the absence of proper methods to measure the displacement response on site. This study aims at suggesting a method to estimate the displacement response from the measured strain signals in an indirect way to predict the displacement response, not a direct way to measure the displacement response. Additionally, by applying the FBG sensors with multi-point measurements not influenced by electric noise, it can be expected that the technique would be applicable to infrastructures.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.635-640
• /
• 2000

Thermal deformation of machine tools can be evaluated from the analysis of the whole temperature field. However, it is extremely inefficient and impossible to acquire the whole temperature field by measuring temperatures of every point. So, a temperature estimator, which can estimate the whole temperature field from the temperatures of just a few points, is required. In this paper, 1-dimensional heat transfer problem is modeled with modal analysis and state space equations. and then state observer is designed to estimate the intensity of heat source and the whole temperature field in real-time. The reliability of this estimator is verified by making a comparison between solutions by the proposed method and the exact solutions of examples. The proposed method is applied to the estimation of temperature distribution in a ball screw system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권2호
• /
• pp.133-139
• /
• 2013

This paper proposes a vision-based indoor localization method for autonomous vehicles. A single upward-facing digital camera was mounted on an autonomous vehicle and used as a vision sensor to identify artificial landmarks and any natural corner features. An interest point detector was used to find the natural features. Using an optical flow detection algorithm, information related to the direction and vehicle translation was defined. This information was used to track the vehicle movements. Random noise related to uneven light disrupted the calculation of the vehicle translation. Thus, to estimate the vehicle translation, a Kalman filter was used to calculate the vehicle position. These algorithms were tested on a vehicle in a real environment. The image processing method could recognize the landmarks precisely, while the Kalman filter algorithm could estimate the vehicle's position accurately. The experimental results confirmed that the proposed approaches can be implemented in practical situations.

• 한국콘텐츠학회논문지
• /
• 제9권8호
• /
• pp.147-157
• /
• 2009

최근 객체지향 개발 방법론을 적용하는 소프트웨어 개발 프로젝트에서 개발 노력 추정 기법으로 사용사례점수(Use Case Point, UCP)에 대한 연구가 계속되고 있다. 기존의 연구는 기술적 요인과 환경적 요인을 적용한 AUCP(Adjusted Use Case Point)에 상수를 곱하여 개발 노력을 추정하는 선형모델을 제안하고 있다. 그러나 소프트웨어 규모가 증가하면 개발기간은 기하급수적으로 증가함으로서 비선형 회귀모델이 적합하다는 사실과 UCP 계산과정에서 TCF(Technical Complexity Factor)와 EF(Environmental Factor)를 적용함에 따른 FP(Function Point) 오차가 발생함으로서 AUCP로 규모를 추정하는 것은 비현실적이다. 이 논문은 사용사례점수 기반의 기존 연구의 문제점을 제시하고, 기존 연구의 문제점인 TCF와 EF를 고려하지 않고 직접 UUCP로 부터 개발 노력을 추정할 수 있는 모델(선형, 로그형, 다항식, 거듭제곱, 지수형)을 도출하고 평가한다. 그 결과, 기존의 선행 모델보다 비선형모델인 지수형 모델이 우수한 결과를 보였다. 따라서 개발될 소프트웨어 시스템의 UUCP를 계산한 후 제안된 모델을 이용하여 개발 노력을 추정함으로서 개발에 소요되는 직접비용 산정이 가능하다.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.19-27
• /
• 2005

As three-dimensional range scanners make large point clouds a more common initial representation of real world objects, a need arises for algorithms that can efficiently process point sets. In this paper, we present a method for extracting smooth surfaces from dense point clouds. Given an unorganized set of points in space as input, our algorithm first uses principal component analysis to estimate the surface variation at each point. After defining conditions for determining the geometric compatibility of a point and a surface, we examine the points in order of increasing surface variation to find points whose neighborhoods can be closely approximated by a single surface. These neighborhoods become seed regions for region growing. The region growing step clusters points that are geometrically compatible with the approximating surface and refines the surface as the region grows to obtain the best approximation of the largest number of points. When no more points can be added to a region, the algorithm stores the extracted surface. Our algorithm works quickly with little user interaction and requires a fraction of the memory needed for a standard mesh data structure. To demonstrate its usefulness, we show results on large point clouds acquired from real-world objects.

• 설비공학논문집
• /
• 제2권3호
• /
• pp.243-255
• /
• 1990

The objective of this study is to present an efficient measurement method of the effective thermal diffusivity for the fibrous insulation material. The non-linear parameter estimation (NPE) method is adapted for this analysis because of its accuracy and its results are compared with those by other direct methods such as CTP, CHP and STD method. A experimental system is constructed with bell-jar vaccum chamber, diffusion pump, tube type furnace, control unit and data acquisition system included with A/D converter and IBM XT/AT personal computer. The typical results obtained from this study are as follows; 1) NPE method can be recommended as an useful and accurate method to measure the effective thermal diffusivity of insuation material because it is shown that the measurement error compared with those by other direct methods is reduced for standard material, NBS-1450b. 2) NPE method can minimize the effects of ill-measured temperature due to external disturbance, because the final value is found by point to point estimating. 3) NPE method dose not depend on the kinds of heat flux, since the surfac temperature are used to estimate the thermal diffusivity. 4) With NPE method, compared with the steady state method, a measuring time and a sample size could be reduced.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1346-1352
• /
• 2006

We describe an effective method of microchip electrophoresis (ME) based on single strand conformation poly-morphism (SSCP) analysis to rapidly detect the point mutation, Leu72Met, in a human obesity gene. The 207-bp dsDNA in the Leu72Met region, an estimate of the child obesity DNA mutant, was amplified by polymerase chain reaction (PCR) and submitted to a conventional glass microchip analysis with a sieving matrix of 1.75% poly(vinylpyrrolidone) (Mr 1 300 000), 1.0% poly(ethyleneoxide) (Mr 600 000) and 5.0% w/w glycerol. When combined with base stacking (BS) with hydroxide ions, the SSCP-ME provided rapid analysis as well as sensitive detection. The detection sensitivity was effectively enhanced in the OH- concentration range of 0.01-0.025 M NaOH. The sensitivity and speed of this ME-based SSCP methodology for the rapid detection of Leu72Met point mutations makes this an attractive method for diagnosing childhood obesity in a clinical diagnostic laboratory.