• Journal of Korea Water Resources Association
• /
• v.55 no.8
• /
• pp.623-634
• /
• 2022

Due to river maintenance projects such as the creation of hydrophilic areas around rivers and the Four Rivers Project, the flow characteristics of rivers are continuously changing, and the risk of water quality accidents due to the inflow of various pollutants is increasing. In the event of a water quality accident, it is necessary to minimize the effect on the downstream side by predicting the concentration and arrival time of pollutants in consideration of the flow characteristics of the river. In order to track the behavior of these pollutants, it is necessary to calculate the diffusion coefficient and dispersion coefficient for each section of the river. Among them, the dispersion coefficient is used to analyze the diffusion range of soluble pollutants. Existing experimental research cases for tracking the behavior of pollutants require a lot of manpower and cost, and it is difficult to obtain spatially high-resolution data due to limited equipment operation. Recently, research on tracking contaminants using RGB drones has been conducted, but RGB images also have a limitation in that spectral information is limitedly collected. In this study, to supplement the limitations of existing studies, a hyperspectral sensor was mounted on a remote sensing platform using a drone to collect temporally and spatially higher-resolution data than conventional contact measurement. Using the collected spatio-temporal hyperspectral images, the tracer concentration was calculated and the transverse dispersion coefficient was derived. It is expected that by overcoming the limitations of the drone platform through future research and upgrading the dispersion coefficient calculation technology, it will be possible to detect various pollutants leaking into the water system, and to detect changes in various water quality items and river factors.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.609-617
• /
• 2017

Lignocellulosic biomass is a renewable resource for production of biofuels and biochemicals. Furfural (FF) is an important platform chemical catalytically derived from the hemicellulose fraction of biomass. Tetrahydrofurfuryl alcohol (THFA) is a FF derivative and can be used as an eco-friendly solvent with thermal and chemical stability. Despite large numbers of experimental studies for catalytic conversion of FF to THFA, few research have conducted on the economic feasibility for large-scale THFA production from FF. At the stage of assessment of the potential for commercialization of conversion technology, a large-scale process study is required to identify technological bottleneck and to obtain information for solving scale-up problems. In this study, process simulation and technoeconomic evaluation for catalytic conversion of FF to THFA are performed, as the following three steps: integrated process design, heat integration, and economic evaluation. First, a large-scale process including conversion and separation processes is designed based on experimental results. When the FF processing rate is 255 tonnes per day, the FF-to-THFA yields are 63.2~67.9 mol%. After heat integration, the heating requirements are reduced by 14.4~16.4%. Finally, we analyze the cost drivers and calculate minimum selling price of THFA by economic evaluation. The minimum selling price of THFA for the developed process are $2,120~2,340 per tonne, which are close to the current THFA market price.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2511-2519
• /
• 2015

In maritime logistics, the technology for transmitting status information has been greatly developed, but it has not been available in general logistics environment or it is impossible to support two-way communication as it simply receives and transfers a container's information. In particular, to support two-way communication in all sections of the global maritime logistics, the address value, which can identify the tag, should be managed. In this context, to improve the 433 MHz-based RFID, the project called "DASH 7" has been conducted in recent years. However, it has stopped proceeding because of its slow progress, including the standardization and development of references. In this paper, we introduced an active IP-RFID system configuration for real-time communication in global maritime logistics using a two-way communication-which is characteristic of an IP-applying virtual address values in the RFID tag, and proposing its process and function. When you apply the IP-RFID system proposed in this paper, not only real-time status tracking in the maritime logistics area is possible, but it is also applicable for controlling the tag.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.4
• /
• pp.597-615
• /
• 2016

Since 1997 the United Kingdom has pursued creative industry and creative city development in accordance with the New Labor Party policy, strengthening its cluster policy by assigning creative city policies to traditional manufacturing-oriented regions. Tech City in London, one of the most successful examples of digital clusters, is an area in which diverse ecosystems for venture business integration have been established, as the once barren space began to spontaneously develop. For this region, systematic linkages including universities, private companies, start-ups, and accelerators have been added, along with the UK government's active support system. As a result of this opportunity, the scale of the UK start-up ecosystem has significantly grown, the number of local companies has surged, and brand effect has greatly improved. Tech City is an example of a well-balanced combination of public effort and private governance, based on the region's historical background and its potential for growth. It is an effective coordination of public policy and private active investment, services, research, and education. The market platform for institutional technology and commercialization, and aggressive investment shares in the risk, have lead to its growth as a start-up and an innovative city. Britain's efforts to expand the nationwide cluster for the future-oriented digital economy is most noteworthy.

• Journal of Technology Innovation
• /
• v.17 no.1
• /
• pp.119-148
• /
• 2009

The paper presents and empirically tests a model of the digital contents(DC) innovation systems that enables us to study interactions between users, service providers, contents developers and network providers, and to examine the relationship between manufacturing innovation and service innovation as well as patterns of innovation in the DC industry. The framework of Gallouj and Weinstein(1997) and Gallouj(2002) is modified into the DC innovation model according to characteristics of the DC industry, that is, user involvement and network externalities. The model is applied to a case analysis that traces the growth of the online game industry in Korea since its introduction. The model offers several advantages over other approaches in understanding the dynamics in the DC industry. Most importantly, it provides a single unified basis within which both service innovation resulting from users and service providers and manufacturing innovation induced by contents developers, platform holders and network providers are analyzed. The distinction between service and manufacturing innovation is important in many ways, for instance in selecting proper government policy tools for promotion or regulation of the DC industry. Second, the Korean online game industry has experienced both radical innovation during the beginning period and non-radical innovation throughout the maturation period. The model developed herein helps to illustrate several types of non-radical innovations such as recombinative innovation that are crucial to sustainable development of the DC industry. Third, the model clarifies impacts of network externalities that are characteristics of the DC industry.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.49-60
• /
• 2017

As well as the strength check, fatigue life check is also mainly required for designing mooring lines of the floating structures. In general, forces which induce dynamic structural response significantly affect to fatigue design of the mooring lines. So, waves are mainly considered as the governing loading for fatigue design of the mooring lines. In this study, characteristics of the fatigue damage of the mooring lines for submerged floating tunnels (SFT) under irregular waves are investigated. For this study time domain hydrodynamic analysis is used to obtain motion of the tunnel and tension and stresses of the mooring lines under the specific environmental conditions. Also, the Rainflow-counting method, the Palmgren-Miner's rule, and S-N curves for floating offshore structures presented by DNV recommendation is applied to calculate the fatigue damage due to the fluctuating stresses. Referring to the design plactice of the tendon pipes for TLP (tension-leg platform), which is very similar structural system to SFT, it is assumed that a 100 year return period wave attacks the SFT systems during 48 hours and the fatigue damages due to the environmental loading are calculated. Following the analysis sequence, the effects of the tunnel draft, spacing and initial inclination angle of the mooring lines on the fatigue damage under the specific environmental loadings are investigated.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.63-70
• /
• 2011

A bicycle is different from vehicles in the structure that a rider is fully exposed to the surrounding environment. Therefore, it needs to make use of prior information about local weather, air quality, trail road condition. Moreover, since it depends on human power for moving, it should acquire route property such as hill slope, winding, and road surface to improve its efficiency in everyday use. Recent mobile applications which are to be used during bicycle riding let us aware of the necessity of development of intelligent bicycles. This study aims to develop a riding state (up-hill, down-hill, accelerating, braking) recognition algorithm using a low-power wrist watch type embedded system which has 3-axis accelerometer and wireless communication capability. The developed algorithm was applied to 19 experimental riding data and showed more than 95% of correct recognition over 83.3% of the total dataset. The altitude and temperature sensor also in the embedded system mounted on the bicycle is being used to improve the accuracy of the algorithm. The developed riding state recognition algorithm is expected to be a platform technology for intelligent bicycle interface system.

• The Journal of Society for e-Business Studies
• /
• v.21 no.4
• /
• pp.137-150
• /
• 2016

A variety of O2O (Online to Offline) services such as Uber, Airbnb, and KakaoTaxi that create new values by connecting offline and online have emerged in the world. O2O services support the convenience of online services and the real-life capability of offline services simultaneously. Thanks to the development of ICTs such as mobility, IoT (Internet of Things), Fin-tech, and big data technologies, the market size of O2O industry is growing very rapidly. This paper reviews various O2O services and industry trends in Korea. In addition, important issues on O2O services and industry promotion are reviewed and presented. Specifically, legislative issues regulating the O2O industry in Korea, interest conflicts between new O2O platform providers and existing traditional offline service providers, current technology infrastructures for O2O services, and negative or side effects of O2O services are reviewed and summarized. Finally, comprehensive policy directions are proposed based on these reviewed issues. It is expected that the proposed policy directions would be adopted by the government and this research could consequently contribute to strengthening the competitiveness of the O2O industry in Korea.

• Journal of Internet of Things and Convergence
• /
• v.6 no.3
• /
• pp.67-73
• /
• 2020

The research status of endangered amphibians in Korea was mainly studied the life-cycle and distribution status of species from the 1980s to the early 2000s. Although a relatively diverse range of studies have been conducted on mackerels, studies on habitat prediction, analysis, change and management are insufficient. WEB, which provides biota information using location information in Korea, is a site operated by the National Bio Resource Center under the Ministry of Environment, but there is no information on endangered species and general species information has also been found to be very scantily. For this research, we secured a database of location information of Narrow-mouth frog, an endangered species, by combining literature and field research, and established a system by applying new technologies and open-based platform technologies that can be easily accessed by non-technical personnel of IT among IT technologies. The system was divided into administrator functions and user functions to prevent indiscriminate sharing of information through authentication procedures through user membership of users. The established system was authorized to show the distance between the current location and the location of the Narrow-mouth frog. Considering the ecological characteristics of the Narrow-mouth frog, which is an endangered species, a radius of 500m was marked to determine the habitat range. The system is expected to be applied to the legal system to change existing protected areas, etc. and to select new ones. It is estimated that practical reduction measures can be derived by utilizing the development plan for reviewing the natural environment. In addition, the deployed system has the advantage of being able to apply to a wide variety of endangered species by modifying the information entered.

• Journal of Plant Biotechnology
• /
• v.32 no.3
• /
• pp.151-159
• /
• 2005

Injury caused by reactive oxygen species (ROS), known as oxidative stress, is one of the major damaging factors in plants exposed to environmental stress. Chloroplasts are specially sensitive to damage by ROS because electrons that escape from the photosynthetic electron transfer system are able to react with relatively high concentration of $O_2$ in chloroplasts. To cope with oxidative stress, plants have evolved an efficient ROS-scavenging enzymes such as superoxide dismutase (SOD) and ascorbate peroxidase (APX), and low molecular weight antioxidants including ascorbate, glutathione and phenolic compounds. To maintain the productivity of plants under the stress condition, it is possible to fortify the antioxidative mechanisms in the chloroplasts by manipulating the antioxidation genes. A powerful gene expression system with an appropriate promoter is key requisite for excellent stress-tolerant plants. We developed a strong oxidative stress-inducible peroxidase (SWPA2) promoter from cultured cells of sweetpotato (Ipomoea batatas) as an industrial platform technology to develop transgenic plants with enhanced tolerance to environmental stress. Recently, in order to develop transgenic sweetpotato (tv. Yulmi) and potato (Solanum tuberosum L. cv. Atlantic and Superior) plants with enhanced tolerance to multiple stress, the genes of both CuZnSOD and APX were expressed in chloroplasts under the control of an SWPA2 promoter (referred to SSA plants). As expected, SSA sweetpotato and potato plants showed enhanced tolerance to methyl viologen-mediated oxidative stress. In addition, SSA plants showed enhanced tolerance to multiple stresses such as temperature stress, drought and sulphur dioxide. Our results strongly suggested that the rational manipulation of antioxidative mechanism in chloroplasts will be applicable to the development of all plant species with enhanced tolerance to multiple environmental stresses to contribute in solving the global food and environmental problems in the 21st century.