• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.563-567
• /
• 2009

The polymer electrolyte membrane fuel cell(PEMFC) with the advantages of low-operating temperature, high current density, low cost and volume, fast start-up ability, and suitability for discontinuous operation becomes the most reasonable and attractive power system for transportation vehicle and micro-grid power plant in a household. 200W PEM-type FCs system was integrated by this study, then the electrical characteristics and diagnosis of the fuel cell were analyzed with variations on mass flow rate and stack temperature. The ranges of the variations are 1~8L/min on $H_2$ volume and $20{\sim}70^{\circ}C$ on stack temperature.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.290-295
• /
• 1996

The purpose of this study is to establish the pressure/temperature curves of Reactor Coolant System for brittle fracture prevention. The pressure/temperature curve is the basis to select RC Pump and limits to operate the plant. Based on the plant operation experience, this curve should be re-generated periodically in order to ensure the structural integrity using data from the test of reactor vessel surveilance materials to compensate for the irradiation effects. This study provides the procedure of pressure/temperature curve generation in term of brittle fracture prevention of reactor vessel. Using the UCN 3&4 data, the sample pressure/temperature curve was generated, and it was compared with those of YGN 3&4 based on the stress and $RT_{NDT}$value.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.770-777
• /
• 2016

It has been a challenge for researchers to accurately measure high temperature creep strain online without damaging the mechanical properties of the pipe surface. To this end, a noncontact method for measuring high temperature strain of a main steam pipe based on digital image correlation was proposed, and a system for monitoring of high temperature strain was designed and developed. Wavelet thresholding was used for denoising measurement data. The sub-pixel displacement search algorithm with curved surface fitting was improved to increase measurement accuracy. A field test was carried out to investigate the designed monitoring system of high temperature strain. The measuring error was less than $0.4ppm/^{\circ}C$, which meets actual measurement requirements for engineering. Our findings provide a new way to monitor creep damage of the main steam pipe of a boiler of an ultra-supercritical power plant in service.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.224-228
• /
• 2006

The characteristics associated with the Alisma plantago quality and the factors as the proper harvesting time and drying temperature of Alisma plantago were examined from 2004 to 2006 at Sunchon, Southern region. The Alisma plantago cultivars tested were Sunwol and Yongjun. The highest yields of root and good quality, color and luster were obtained when harvested 22 days after first frost date and dried with $35-40^{\circ}C$ of a weeks at the drying oven for Sunwol and Yongjin cultivars. Considering from our results, optimum harvesting time were most likely to be harvesting time of 22 days after first frost date and drying temperature of $35-40^{\circ}C$ of a weeks at the drying oven.

• Journal of Plant Biotechnology
• /
• v.30 no.1
• /
• pp.41-45
• /
• 2003

A study was under taken to investigate the appropriate explant sources of flower organ and suitable cultural conditions such as light, temperature, and sucrose in plant regeneration of Iris ensata culture. Explants of perianth, ovary, pedicel, and peduncle of Iris ensata were cultured at different daylength (0, 8, 16, 24 hour), different temperatures (10, 15, 25, 3$0^{\circ}C$), and sucrose concentrations (1, 3, 6, 9%) on MS medium. Formation of adventitious roots from explants of Iris ensata was effective in the dark, while that of adventitous shoots was effective in the light. The optimum daylength for young plant regeneration was 16 hours. The optimum temperature for shoot formation of Iris ensata explants was $25^{\circ}C$ but the formation at 10 and 15$^{\circ}C$ was ineffective. Especi-ally, perianth and ovary was effective in shoot formation from flower organ expants. T-he optimum concentration of sucrose for shoots and roots formation of Iris ensata explants was 3 and 6%, respectively.

• Plant Resources
• /
• v.7 no.1
• /
• pp.29-35
• /
• 2004

Root chicory (Cichorium intybus L. var. sativus) is potential alternative medicinal and sugar crop which accumulates a high amount of linear polyfructan, inulin in its roots. A problem in root production is that over-wintered stock plants often flower. Once the plant becomes reproductive, stem elongation and root growth slows and floral buds arise from every node, rendering the plants useless for propagation. The objectives of this research was to examine the effectiveness of manipulating environmental factors containing photoperiod, temperature and number of leaf states. The experiment was performed in growth chamber to create two photoperiods (8 h, and 16 h) with three temperature regimes (5$^{\circ}C$/3$^{\circ}C$, 1$0^{\circ}C$/8$^{\circ}C$ and 15$^{\circ}C$/13$^{\circ}C$ day/night temperature) for a total of six treatments on three type of true-leaf stage of plant. Data of bolting rate, shoot and root length, shoot and fresh weight was invetigated in each treatments. This is the first report on changes in bolting rate and shoots and roots production during a whole growing season and differences in the effect of cold and photoperiod treatment depending on the true-leaf stage of plant.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.526-529
• /
• 2001

The study was conducted to investigate quality changes of red pepper by different shelf temperatures after storage at $7^{\circ}C$ for 30 days. Red pepper fruits produced high volume of $C_2H_4$ and $CO_2$ when alternating temperatures exceeded $10^{\circ}C$. Total sugar contents were not different among all the treatments. In contrast, sucrose content decreased about half at higher shelf temperature conditions than at $7^{\circ}C$. Capsaicinoid content was not influenced by alternating temperature, but ascorbic acid content tended to decrease by high shelf temperature after storage at $7^{\circ}C$. Decay did not occur under $13^{\circ}C$, while it occurred in 22.2% of hits at $15^{\circ}C$ and 68.8% at room temperature, respectively. From this results, it is suggested that the optimum shelf temperature of red pepper after low temperature storage should be under $13^{\circ}C$ and that fruits of red pepper stored at $7^{\circ}C$ for 30 days could be sold within 10 days on the shelf.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.270-276
• /
• 1997

This experiment was conducted to develop a practical method to growth in hydroponics conditions. For this purpose, leaf lettuce (Lactuca sativa L., cv. 'Cheongchima') was cultivated under different temperature and light conditions in experimental fields of Sahmyook university from March, 1991 to May, 1996. The visual quality score(VQS), a quantitative parameter to evaluate harvested leaf lettuce quality. The leaf lettuce cultivated at $25^{\circ}C$ solution temperature showed the highest fresh weight pe, plant (59.7g/plant), but lowest visual quality score (5.2), while leaf lettuce cultivated at 15$^{\circ}C$ solution temperature showed lower fresh weight per plant (25.2g/plant) but highest visual quality score (7.2). In general, growth of leaf lettuce was retarded by low solution temperature, but quality was higher than those of other solution temperature. Different day/night temperature of nutrient solutions 20/2$0^{\circ}C$ and 25/2$0^{\circ}C$ was highest in yield, but leaf type was grow longer, and visual quality are inferior to low temperature. Yield was decreased as 10 and 25% at 60 and 80% shading treatment, respectively. Chlorophyll content was decreased by shading. but plant height and root length were increased of leaf lettuce growth with hydroponics.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.4
• /
• pp.37-46
• /
• 2016

This study is to estimate COMS (Communication, Ocean and Meteorological Satellite) daily land surface temperature (LST) of Korea Peninsula from 15 minutes interval COMS LST (COMS LST-15) satellite data. Using daily observed LST data of Automated Agriculture Observing System (AAOS) 11 stations from January 2013 to May 2015, the COMS daily LST was compared and validated. For the representative time for daily mean LST value from COMS LST-15, the time of 23 : 45 and 0:00 showed minimum deviations with AAOS daily LST. The time zone from 23 : 45 to 1:15 and from 7 : 30 to 9 : 45 showed high determination coefficient (R2) of 0.88 and 0.90 respectively. The daily COMS LST by averaging COMS LST-15 of the day showed R2 of 0.83. From the 5 cases of results, the COMS daily LST could be extracted from the average LST by using 15 minutes data from 7 : 30 to 9 : 45.

• Journal of Power System Engineering
• /
• v.8 no.3
• /
• pp.18-22
• /
• 2004

Boiler is one of the most important utilities providing steam to turbine in order to supply mechanical energy in thermal power plant. It is composed of thousands of tubes for high efficient heat transfer. The material for boiler tubes is used in such high temperature and pressure condition as $540^{\circ}C$, 22MPa. The boiler tube material is required to resist creep damage, fatigue cracking, and corrosion damages. 2.25%Cr-1Mo steel is used for conventional boiler tubes, and austenitenite stainless steel is used for higher temperature boiler tubes. But the temperature and pressure of steam in power plant became higher for high plant efficiency. So, the property of boiler tube material must be upgaded to fit the plant property. Several boiler tube material was developed to fit such conditions. X20CrMoV12.1 steel is also developed in 1980's and used for superheater and reheater tubes in supercritical boilers. The material has martensite microstructures which is difficult to evaluate the degradation. In this thesis, degrade the X20CrMoV12.1 steel at high temperatures in electric furnace, and evaluate hardness with Vickers hardness tester and strengths with Indentation tester.