• 한국지진공학회논문집
• /
• 제17권2호
• /
• pp.79-88
• /
• 2013

Steel plate concrete (SC) composite structure is now being recognized as a promising technology applicable to nuclear power plants as it is faster and suitable for modular construction. It is required to identify its dynamic characteristics prior to perform the seismic design of the SC structure. Particularly, the damping ratio of the structure is one of the critical design factors to control the dynamic response of structure. This paper compares the criteria for the damping ratios of each type of structures which are prescribed in the regulatory guide for the nuclear power plant. In order to identify the damping ratio of SC shear wall, this study made SC wall specimens and conducted experiments by cyclic lateral load tests and vibration tests with impact hammer. During the lateral loading test, SC wall specimens exhibited large ductile capacities with increasing amplitude of loading due to the confinement effects by the steel plate and the damping ratios increased until failure. The experimental results show that the damping ratios increased from about 6% to about 20% by increasing the load from the safe shutdown earthquake level to the ultimate strength level.

• 대한금속재료학회지
• /
• 제46권6호
• /
• pp.363-369
• /
• 2008

Effects of top coat morphology and thickness on thermal fatigue behavior of thermal barrier coatings (TBC) were investigated in this study. Thermal fatigue tests were conducted on three coating specimens with different top coat morphology and thickness, and then the test data were compared via microstructures, cycles to failure, and fracture surfaces. In the air plasma spray specimens (APS1, APS2), top coat were 200 and $300{\mu}m$ respectively. The thickness of top coat was about $700{\mu}m$ in the perpendicular cracked specimen (PCS). Under thermal fatigue condition at $1,100^{\circ}C$, the cycles to top coat failure of APS1, APS2, and PCS were 350, 560 and 480 cycles, respectively. The cracks were initiated at the interface of top coat and thermally grown oxide (TGO) and propagated into TGO or top coat as the number of thermal fatigue cycles increased. For the PCS specimen, additive cracks were initiated and propagated at the starting points of perpendicular cracks in the top coat. Also, the thickness of TGO and the decrease of aluminium concentration in bond coat do not affect the cycles to failure.

• Journal of Forest and Environmental Science
• /
• 제34권6호
• /
• pp.457-460
• /
• 2018

Mushroom survey was conducted in the Phou Khao Khuoay National Protected Area (PKKNPA) located at east direction 65km from Vientiane, the capital city of Lao-PDR from September 2015 to November 2016. During this periods, mushroom specimens were collected from 10 different survey sites, and then were identified and classified into 149 species, 113 genera, and 55 families by morphological and molecular analyses. The mushrooms belongs to Ascomycota were classified into 13 species, 7 genera, 5 families, and 5 orders, while those belongs to Basidiomycota were classified into 136 species, 113 genera, 55 families, and 18 orders, respectively. Among these mushrooms, the most species-rich families were Polyporaceae (18.1%), Marasmiaceae (11.0%), Ganodermataceae (8.6%), Xylariaceae (5.8%), Russulaceae (5.4%), Agaricaceae (4.7%), Boletaceae (4.7%), Hymenochaetaceae (3.9%), and Amanitaceae (3.6%), and comprised 65.8% of the total specimens identified.

• Journal of Species Research
• /
• 제11권2호
• /
• pp.98-101
• /
• 2022

The genus Tripylina Brzeski, 1963 is a group of terrestrial nematodes that inhabit soil and semi-wet biomes, most of which have been reported from Europe, Asia, America, Africa, and New Zealand. Tripylina stramenti (Yeates, 1971) Tsalolikhin, 1983, belonging to the family Trischistomatidae Andrassy, 2007, is newly discovered from Korea. The specimens were collected from the edge of the valley of Ulleung-gun, Gyeongsangbuk-do, South Korea. Tripylina stramenti described herein shows typical morphological characters of the genus Tripylina, including six and four setae in a single whorl, present dorsal tooth and subventral teeth, prodelphic reproductive system of female, absence post-uterine sac, narrow sickle-shaped spicule of male and generally S-shaped tail. The specimens differ in their body width (from the New Zealand populations), outer labial setae length, cuticles thickness(from the West African populations), and nerve ring position (from Indian populations). This species is distinguished from other Tripylina species by its relatively large body, two anterior and subventral teeth, and single cervical seta. In this study, morphological characteristics and morphometric information of the Korean T. stramenti isolate are described, illustrated, and compared with the same species from other geographic origins.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.38-45
• /
• 2004

A practical method for evaluating the possibility of the occurrence of cracking in actual thick-plate T-joint weldments is presented in this study. Systematic experitrients based on the method of the design of experiment are conducted in order to investigate the crack tendency in relation to typical welding parameters such as diffusible hydrogen, restraint intensity, preheating temperature and so on. The elastic analysis using the fmite element techniques is employed to quantify the restraint intensities of the specimens. The defined restraint intensities are treated in numerical way for the sake of considering the most uncertain factor among some major factors that govern the cracking phenomena due to welding. The critical plane for judgment of the crack occurrence or crack density is presented as a function of typical welding parameters including determined restraint intensities. The results of numerical estimation by the proposed method for the experimental specimens show the usefulness as a practical tool in welding induced crack problem having extensive uncertainties.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.52-60
• /
• 2016

Recently nickel based superalloys are extensively being regarded as the materials for the steam turbine parts for hyper super critical (HSC) power plants working at the temperature over $700^{\circ}C$, since the materials have excellent strength and corrosion resistance in high temperature. In this paper, alloy 617 of solution strengthened material and alloy 263 of ${\gamma}^{\prime}$-precipitation strengthened material were prepared as the testing materials for HSC plants each other. Post weld heat treatment (PWHT) was conducted with the gas tungsten arc (GTA) welded specimens. The microstructure of the base metals and weld metals were investigated with Electron Probe Micro-Analysis (EPMA) and Scanning Transmission Electron Microscope (STEM). The experimental results revealed that Ti-Mo carbides were formed in both of the base metals and segregation of Co and Mo in both of the weld metals before PWHT and PWHT leaded to precipitation of various carbides such as Mo carbides in the specimens. Furthermore, fine ${\gamma}^{\prime}$ particles, that were not precipitated in the specimens before PWHT, were observed in base metal as well as in the weld metal of alloy 263 after PWHT.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제4권2호
• /
• pp.101-109
• /
• 2016

발전소 내열강의 물성치는 고온 가동시간이 누적됨에 따라 열시효의 영향을 받는다. 본 연구에서는 제 4 세대 원자력시스템의 재료로 널리 채택되고 있는 Mod.9Cr-1Mo (ASME Grade 91)강을 대상으로 항복강도, 인장강도 및 파괴거동에 열시효가 미치는 영향에 대해 조사 및 분석하였다. 국내에서 가동 중인 초초임계(USC) 화력발전소의 배관계통에서 채취한, 73,716 시간의 가동 이력을 겪은 Gr.91 강 재료가 재료 실험을 위해 사용되었고, 동 시험결과와 가동 이력을 겪지 않은 신재의 시험결과를 비교 분석하였다. 또한 ASME 코드의 물성치와 RCC-MRx 의 물성치와 비교 분석하였고, 이들 설계기술기준 물성치의 보수성은 신재 및 가동 이력을 겪은 재료의 시험결과와 비교 분석을 통해 정량화하였다.

• 한국자원식물학회지
• /
• 제33권2호
• /
• pp.130-137
• /
• 2020

경기도 김포시 및 인천광역시 강화군 일대에서 미기록 외래식물 좀갯드렁새[Diplachne fusca subsp. uninervia (J. Presl) P.M. Peterson & N. Snow]가 발견되었다. 이 분류군은 아메리카 원산이며, 여러 나라에서 외래식물로 보고되었다. 국내에서 외래종으로 먼저 보고된 갯드렁새[D. fusca subsp. fascicularis (Lam.) P.M. Peterson & N. Snow]와 근연종이며, 모종인 D. fusca의 종하분류군이다. 좀갯드렁새는 소수, 포영 및 호영의 길이가 짧고 까락이 없는 특징으로 구별된다. 소수의 길이가 짧아 국명을 좀갯드렁새로 신칭하였다. 주요 형질에 대한 도해와 기재, 검색표를 제시하였다. 갯드렁새의 이전 학명인 D. fusca (≡Leptochloa fusca)은 형태적으로 D. fusca subsp. fascicularis와 상이하다. 갯드렁새의 학명을 기준표본, 원기재문, 최근의 논문들을 근거로 D. fusca (≡L. fusca)에서 D. fusca subsp. fascicularis으로 변경한다.

• 식물분류학회지
• /
• 제43권3호
• /
• pp.188-195
• /
• 2013

한국산 쑥속(Artemisia L.) 산흰쑥절(sect. Absinthium)의 분류군들을 대상으로 기준표본과 원기재, 생체 및 표본에 근거하여 외부형태학적 형질과 학명을 재검토하였다. 쑥속 산흰쑥절에 포함되는 분류군의 생육지, 생육형, 지하부의 구조, 잎의 형태, 두상화서의 형태는 분류군을 식별하는데 유용한 형질로 관찰되었다. 국내에 분포하는 산흰쑥절은 산흰쑥(A. sieversiana), 비단쑥(A. lagocephala), 애기비쑥(A. fauriei)의 3분류군으로 정리되었으며, 이에 따른 분류군의 형질기재 및 도해를 제시하였다. 특히, 화탁에 털이 있는 애기비쑥은 화탁에 털이 없는 더위지기절(sect. Abrotanum)의 큰비쑥(A. fukudo)과 서해안의 갯벌에 혼생하며, 외부형태적으로 절간의 잡종으로 추정되는 개체들이 분포하였다.

• 식물병연구
• /
• 제16권1호
• /
• pp.1-9
• /
• 2010

Among the plant specimens requested from agricultural actual places of farmers, Agency of agricultural extension services and so forth for the diagnosis of plant virus diseases in 2009, the rate of crop types was 87.5% for vegetables, 4.0% for upland crops and 3.5% for orchids. In vegetables, the crops damaged severely by viral diseases were red pepper and tomato by the infection rate of 51.6% and 26.5%, orderly. Virus species occurring vegetables were 19 and the economically important viruses were Cucumber mosaic virus (CMV), Tomato spotted wilt virus (TSWV), Tomato yellow leaf curl virus (TYLCV), Pepper mild mottle virus (PMMoV) with the infection rate of 33.2%, 16.9%, 16.1% and 7.4%, respectively. Rice stripe virus (RSV) occurred at the whole areas of west coast in Korea in 2009, and its incidence was 14.2% mainly on the susceptible cultivars and yield loss was estimated up to 50%. TYLCV was spread at 34 areas of Si and/or Gun, 22 areas in 2009 and 12 in 2008. Distribution of TSWV was expanded newly in 6 areas of Si and/or Gun including Gangryung, Gangwondo in 2009, and its occurrence areas were 23 Si and/or Gun after first incidence at Anyang area in 2004. Tomato bushy stunt virus (TBSV) was incited newly at Gimcheon area in 2009 with the infection rate of 65.2%, and its soil transmission rate was 55.0% in average.