• CELLMED
• /
• v.13 no.6
• /
• pp.5.1-5.8
• /
• 2023

Objectives: Cassia occidentalis L. is a weed belonging to the Caesalpiniaceae family. The root of this medicinal plant is used for the treatment of various ailments, including kidney diseases. The present study was aimed at evaluating the nephroprotective effects of HAE of the roots of Cassia occidentalis L. against gentamicininduced renal toxicity in albino Wistar rats. Methods: The renal toxicity was induced by subcutaneous administration of gentamicin at 100 mg/kg in the rats belonging to the disease control and treatment groups from the 4^th to the 8^th day. The rats in the treatment group received HAE of the roots of Cassia occidentalis L. at 67 mg/kg b. w. orally for 8 days, while no treatment was given to the rats in the disease control and plain control groups. At the end of the experiment, renal biomarkers viz; s. creatinine, b. urea, and s. uric acid, were investigated. The histopathological examination of the kidney specimens was also carried out. Results: The results of the present study revealed that renal function biomarkers such as s. creatinine, b. urea, and s. uric acid were significantly reduced in the rats of the treatment group as compared to those of the disease control group. Moreover, the histoarchitecture reports of the treatment group's kidney specimens showed significant improvements. Conclusion: The results suggested that the HAE of Cassia occidentalis L. roots promisingly prevented kidney injury in gentamicin-induced nephrotoxic rats. This effect might be due to improved clearance of gentamicin from the renal tubule and decreased generation of reactive oxygen species (ROS).

• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.401-411
• /
• 2023

This study investigates the synthesis, characterization, and application of zinc oxide (ZnO) nanoparticles for corrosion resistance and stress corrosion cracking (SCC) mitigation in high-temperature and high-pressure environments. The ZnO nanoparticles are synthesized using plasma discharge in water, resulting in rod-shaped particles with a hexagonal crystal structure. The ZnO nanoparticles are applied to Alloy 600 tubes in simulated nuclear power plant atmospheres to evaluate their effectiveness. X-ray diffraction and X-ray photoelectron spectroscopy analysis reveals the formation of thermodynamically stable ZnCr₂O₄and ZnFe₂O₄ spinel phases with a depth of approximately 35 nm on the surface after 240 hours of treatment. Stress corrosion cracking (SCC) mitigation experiments reveal that ZnO treatment enhances thermal and mechanical stability. The ZnO-treated specimens exhibit increased maximum temperature tolerance up to 310 ℃ and higher-pressure resistance up to 60 bar compared to non-treated ZnO samples. Measurements of crack length indicate reduced crack propagation in ZnO-treated specimens. The formation of thermodynamically stable Zn spinel structures on the surface of Alloy 600 and the subsequent improvements in surface properties contribute to the enhanced durability and performance of the material in challenging high-temperature and high-pressure environments. These findings have significant implications for the development of corrosion-resistant materials and the mitigation of stress corrosion cracking in various industries.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.103-109
• /
• 2016

Polyethylene pipes has useful benefits which are anti-corrosive and flexible material, so it is used to gas pipes but also class 3 water pipes of nuclear power plant, process pipes of petrochemical plant and chemical plant. So the usage of polyethylene pipes is widely increased. But it has been limited for the usage of polyethylene, because it can not be directly detected to fusion joints by using non destructive evaluation. Polyethylene pipes are connected by two methods, one is butt fusion and the other is electrofusion. Butt fusion is widely used to connecting the pipes. It is proposed to method for determining the reliability of joints in this study that is detection of the melt flow zone at fusion joints. In this study, middle density polyethylene is used, outside diameter of the test specimen is 225mm and thickness is 20.5mm. Speed of ultrasonic of this test specimen is 2,200m/s. Test specimens were fabricated by varying the heating time which means from 0% to 130% applying time through heating plate to polyethylene for detecting melt flow zone. Also 4 additional test specimens were made, one was made that not scrapping attached surface of pipes but applying 100% of the proper heating time and the others were made to include of soil, gravel and vinly tape paper at fusion joints, that were also applied 100% of proper heating time. Ultrasonic testing to measure the melt flow zone of 20 test specimens was conducted by using 3.5MHz and 5.0MHz ultrasonic probes and melt flow zone measuring was conducted to three times at different point to one specimen. To differentiate the melt flow zone signal, post image processing was equally conducted to all test results and image levels, contrast, sharpen, threshold were adopted to all teat results and the test results were displayed gray scale. From the results, for the shorter heating times the reflection area of multiple echo have been increased, so the data was obtained from the position where it can be eliminated as much as possible. At 80% of proper heating time(168 sec.), the signal of melt flow zone was obtained clearly, so measuring could be conducted. From 7% of proper heating time(15 sec.) to shorter heating times. we could not obtain the signal because test specimen was not fused. From the result, we can verify that measuring of melt flow zone by using phased array ultrasonic imaging method is possible. And we can verify to complete and incomplete butt fusion by measuring the melt flow zone.

• Animal Systematics, Evolution and Diversity
• /
• v.21 no.1
• /
• pp.45-56
• /
• 2005

Three species of Gastrostyla ciliates collected from the sewage treatment plant and a puddle in the valley from Korea were identified as Gastrostyla minima Hemberger, 1985, G. steinii Engelmann, 1862 and G. setifera (Engelmann, 1862). The description was based on the observation of living specimens, protargol impregnated specimens and biometric analysis. The morphological variations among the populations of these species were investigated with morphometry. These species have not been reported in Korea and their diagnostic characteristics are as follows: G. minima normally has two oval macronuclei (Ma) with one spherical micronucleus (Mi) respectively, continuous ventral cirral row (VCR) with additional one postoral ventral cirrus (poVC), five transverse cirri (TC), six dorsal kineties (DK) with broken 4th kinety, and cortical granules. G. steinii has four oval Ma with three to five Mi, discontinuous VCR with additional one poVC, four TCs, six DKs, and no cortical granules. G. setifera has two oval Ma with one spherical Mi respectively, five TCs which distinctly separate in two groups, six DKs, discontinuous VCR with additional two poVCs, and no cortical granules.

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.226-230
• /
• 2006

Cucumber mosaic virus(CMV) was occurred on red pepper showing vein chlorosis or vein necrosis with the incidence rate of 52% from 62 specimens collected in natural fields. Among 32 samples infected with CMV, the specimens of 22 red pepper leaves showing vein chlorosis were infected singly with CMV-VCH. CMV-VCH induced vein chlorosis on the inoculated leaves, and vein banding and vein necrosis on the upper leaves of Nicotiana glutinosa, and then killed after showing bud necrosis. The typical symptoms of vein banding, malformation and blister were produced on the upper leaves of Nicotiana benthamiana and N. tabacum 'Ky-57' without symptoms on the inoculated leaves. The commercial cultivars of 'Bugang', 'Manitta' and 'Gwariput' were shown the typical symptom of vein chlorosis by the mechanical inoculation of CMV-VCH. CMV-VCH was detected specifically by RT-PCR. Virus particles of CMV-VCH were isometric shape having 30 nm diameter. Ultraviolet absorption of purified CMV-VCH was maximum at 260 nm and minimum at 242 nm. The ratio of A260/A280 was 1.71. CMV-VCH had the single nucleo-protein having the molecular weight of 24.5 kDa.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.1
• /
• pp.26-33
• /
• 2009

Recently ultra-supercritical steam power plants operate at $1000^{\circ}F$ ($538^{\circ}C$) and 3500 psi (24.1 MPa). Thermal efficiency of power plant will be increased about 2% if steam temperature increases from $1000^{\circ}F$ to $1150^{\circ}F$ ($621^{\circ}C$). In this study valve materials Incoloy901 (IC901) and Inconel718 (IN718) were nitrided to improve the surface hardness and solid lubrication function of the valve materials. The hardness of both IC901 and IN718 increased about two times by ion nitriding. IC901, IN718 and their nitrided specimens were corroded under ultra super-critical condition (USC) of $621^{\circ}C$. and 3600 psi (24.8 MPa) for 2000 hours. Oxidations of both IC901 and IN718 were very small due to the formation of protective oxide layer on the surface. But the corrosion resistance of both nitrided specimens decreased because of the formation of non-protective nitride layer of $Fe_{4}N$, $Fe_{2}N$ and CrN on the surface layer. The hardness of both nitrided IC901 and IN718 at $20{\mu}m$ depth from the surface decreased about 30% and 20% respectively by USC 2000 hours.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.4
• /
• pp.306-317
• /
• 2015

This study was conducted to address the taxonomic status of the Korean endemic species Saxifraga octopetala, which is sometimes considered conspecific to Micranthes manchuriensis. Extensive molecular phylogenetic analysis using nrITS sequences as well as morphological examination of type specimens of the two species were undertaken to ascertain the phylogenetic position and species delimitation of S. octopetala. In the resulting nrITS trees, a total of 65 accessions representing S. octopetala grouped together and nested within the Micranthes clade, exhibiting a close relationship with M. nelsoniana and M. manchuriensis. Multiple accessions of M. manchuriensis collected from China and Russia also formed a clade, showing a sister group relationship with M. nelsoniana var. pacifica and M. fusca. The ambiguous species entity of S. octopetala is thought to have originated from Nakai's misinterpretation of Wilford's collection (type specimens of M. manchuriensis), which is a complex collection including an inflorescence of M. nelsoniana. In spite of apparent morphological similarity between S. octopetala and M. manchuriensis, they differ in the presence and absence of underground stolons. The distinct position of S. octopetala within the Micranthes clade on the nrITS tree suggests that it should retain species status in Micranthes. Thus a new combination (Micranthes octopetala) is proposed.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.4
• /
• pp.332-352
• /
• 2015

The tribe Neillieae, a small group of about 18 species in the Rosaceae, comprises three taxonomically difficult genera, Neillia, Physocarpus, and Stephanandra. The tribe, characterized by lobed leaves with persistent or deciduous stipules and ovoid, shiny seeds with copious endosperm, is strongly supported as a monophyletic group by a variety of lines of molecular evidence. Due to the high amount of morphological variation across the three genera and the species in tribe Neillieae, conflicting classification schemes and numerous species have been proposed over the past three centuries. However, no comprehensive systematic study of the group, including all species across their geographic ranges, has ever been undertaken. As part of a taxonomic revision of tribe Neillieae, a revision of Physocarpus based on the morphological examination of herbarium specimens, including types, and field observation is presented. Artificial keys, comprehensive nomenclatural treatments, descriptions, distribution maps, and lists of specimens examined are provided. Six species in Physocarpus are recognized. A lectotype is here designated for the following species: Opulaster pubescens, Opulaster ramaleyi, Spiraea opulifolia var. parvifolia, Spiraea opulifolia var. tomentella, Physocarpus michiganensis, and Physocarpus missouriensis.

• Korean Journal of Plant Taxonomy
• /
• v.41 no.4
• /
• pp.329-337
• /
• 2011

The Acer wilsonii complex including A. wilsonii, A. tutcheri, and A. confertifoilum is distributed in southern China. Morphological variation was examined to delimit the species and to determine whether recognition at the specific level was warranted. Univariate and bivariate statistical methods, based on data taken from herbarium specimens, were used to examine morphological variation between and within species. This study showed that A. tutcheri differed from A. wilsonii by its rather short inflorescence, small leaf blades, and three leaf lobes with distinctive serrate leaf lobes. In contrast, there was virtually no separation of taxa with respect to the paniculate-corymbose or short paniculate inflorescence between A. confertifolium and A. tutcheri, suggesting that A. confertifolium morphologically resembled A. tutcheri and is a rather smaller form of it. Circumscription of Acer wilsonii has been quite troublesome, because the important holotype and isotype specimens contained different species under the same number and were misleading with respect to the correct application of the name. Furthermore, lobation is very weak within ser. Sinensia, but diversified inflorescences usually occur in China. A three lobed leaves species, A. wilsonii, represents the reduction in lobation without any modification of panicle inflorescences and seems to be closely related to A. sinense. However, A. tutcheri, which shows a reduction in panicle inflorescence with four petals and sepals, may not be closely related to A. sinense. Three lobed taxa may not correctly reflect the true relationship within ser. Sinensia. The designated lectotype of A. wilsonii, line drawings of representative leaves of related species, a key, and distribution maps of these taxa are presented.

• Korean Journal of Plant Taxonomy
• /
• v.50 no.1
• /
• pp.56-79
• /
• 2020

Baekdudaegan, the largest mountain range in eastern Asia, is a biodiversity hotspot in Korea that may have served as a glacial refugium. This study presents the flora of vascular plants on Deok-chi upto the Yuk-sim-nyeong area of the Baekdudaegan conservation area. The survey area was divided into four subareas and fieldwork was conducted for a total of twelve days in 2015. Voucher specimens were collected during the survey and were deposited at Daejeon University. A list of vascular plants was prepared based on the voucher specimens. The results of the survey showed that a total of 441 taxa, consisting of 100 families, 265 genera, 398 species, 9 subspecies, 32 varieties, and 2 forms, were found in the survey area. There was one endangered species, Aconitum coreanum, in the Bonghwasan Mt. area. Sixteen endemic taxa, 74 floristic regional indicator plants, as designated by the Ministry of the Environment, and eleven naturalized plants were distributed. The results of this study can serve as basic information to establish conservation and management plans for the Baekdudaegan conservation area.