• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.2
• /
• pp.79-88
• /
• 2013

Steel plate concrete (SC) composite structure is now being recognized as a promising technology applicable to nuclear power plants as it is faster and suitable for modular construction. It is required to identify its dynamic characteristics prior to perform the seismic design of the SC structure. Particularly, the damping ratio of the structure is one of the critical design factors to control the dynamic response of structure. This paper compares the criteria for the damping ratios of each type of structures which are prescribed in the regulatory guide for the nuclear power plant. In order to identify the damping ratio of SC shear wall, this study made SC wall specimens and conducted experiments by cyclic lateral load tests and vibration tests with impact hammer. During the lateral loading test, SC wall specimens exhibited large ductile capacities with increasing amplitude of loading due to the confinement effects by the steel plate and the damping ratios increased until failure. The experimental results show that the damping ratios increased from about 6% to about 20% by increasing the load from the safe shutdown earthquake level to the ultimate strength level.

• Korean Journal of Metals and Materials
• /
• v.46 no.6
• /
• pp.363-369
• /
• 2008

Effects of top coat morphology and thickness on thermal fatigue behavior of thermal barrier coatings (TBC) were investigated in this study. Thermal fatigue tests were conducted on three coating specimens with different top coat morphology and thickness, and then the test data were compared via microstructures, cycles to failure, and fracture surfaces. In the air plasma spray specimens (APS1, APS2), top coat were 200 and $300{\mu}m$ respectively. The thickness of top coat was about $700{\mu}m$ in the perpendicular cracked specimen (PCS). Under thermal fatigue condition at $1,100^{\circ}C$, the cycles to top coat failure of APS1, APS2, and PCS were 350, 560 and 480 cycles, respectively. The cracks were initiated at the interface of top coat and thermally grown oxide (TGO) and propagated into TGO or top coat as the number of thermal fatigue cycles increased. For the PCS specimen, additive cracks were initiated and propagated at the starting points of perpendicular cracks in the top coat. Also, the thickness of TGO and the decrease of aluminium concentration in bond coat do not affect the cycles to failure.

• Journal of Forest and Environmental Science
• /
• v.34 no.6
• /
• pp.457-460
• /
• 2018

Mushroom survey was conducted in the Phou Khao Khuoay National Protected Area (PKKNPA) located at east direction 65km from Vientiane, the capital city of Lao-PDR from September 2015 to November 2016. During this periods, mushroom specimens were collected from 10 different survey sites, and then were identified and classified into 149 species, 113 genera, and 55 families by morphological and molecular analyses. The mushrooms belongs to Ascomycota were classified into 13 species, 7 genera, 5 families, and 5 orders, while those belongs to Basidiomycota were classified into 136 species, 113 genera, 55 families, and 18 orders, respectively. Among these mushrooms, the most species-rich families were Polyporaceae (18.1%), Marasmiaceae (11.0%), Ganodermataceae (8.6%), Xylariaceae (5.8%), Russulaceae (5.4%), Agaricaceae (4.7%), Boletaceae (4.7%), Hymenochaetaceae (3.9%), and Amanitaceae (3.6%), and comprised 65.8% of the total specimens identified.

• Journal of Species Research
• /
• v.11 no.2
• /
• pp.98-101
• /
• 2022

The genus Tripylina Brzeski, 1963 is a group of terrestrial nematodes that inhabit soil and semi-wet biomes, most of which have been reported from Europe, Asia, America, Africa, and New Zealand. Tripylina stramenti (Yeates, 1971) Tsalolikhin, 1983, belonging to the family Trischistomatidae Andrassy, 2007, is newly discovered from Korea. The specimens were collected from the edge of the valley of Ulleung-gun, Gyeongsangbuk-do, South Korea. Tripylina stramenti described herein shows typical morphological characters of the genus Tripylina, including six and four setae in a single whorl, present dorsal tooth and subventral teeth, prodelphic reproductive system of female, absence post-uterine sac, narrow sickle-shaped spicule of male and generally S-shaped tail. The specimens differ in their body width (from the New Zealand populations), outer labial setae length, cuticles thickness(from the West African populations), and nerve ring position (from Indian populations). This species is distinguished from other Tripylina species by its relatively large body, two anterior and subventral teeth, and single cervical seta. In this study, morphological characteristics and morphometric information of the Korean T. stramenti isolate are described, illustrated, and compared with the same species from other geographic origins.

• International Journal of Korean Welding Society
• /
• v.4 no.1
• /
• pp.38-45
• /
• 2004

A practical method for evaluating the possibility of the occurrence of cracking in actual thick-plate T-joint weldments is presented in this study. Systematic experitrients based on the method of the design of experiment are conducted in order to investigate the crack tendency in relation to typical welding parameters such as diffusible hydrogen, restraint intensity, preheating temperature and so on. The elastic analysis using the fmite element techniques is employed to quantify the restraint intensities of the specimens. The defined restraint intensities are treated in numerical way for the sake of considering the most uncertain factor among some major factors that govern the cracking phenomena due to welding. The critical plane for judgment of the crack occurrence or crack density is presented as a function of typical welding parameters including determined restraint intensities. The results of numerical estimation by the proposed method for the experimental specimens show the usefulness as a practical tool in welding induced crack problem having extensive uncertainties.

• Journal of Welding and Joining
• /
• v.34 no.3
• /
• pp.52-60
• /
• 2016

Recently nickel based superalloys are extensively being regarded as the materials for the steam turbine parts for hyper super critical (HSC) power plants working at the temperature over $700^{\circ}C$, since the materials have excellent strength and corrosion resistance in high temperature. In this paper, alloy 617 of solution strengthened material and alloy 263 of ${\gamma}^{\prime}$-precipitation strengthened material were prepared as the testing materials for HSC plants each other. Post weld heat treatment (PWHT) was conducted with the gas tungsten arc (GTA) welded specimens. The microstructure of the base metals and weld metals were investigated with Electron Probe Micro-Analysis (EPMA) and Scanning Transmission Electron Microscope (STEM). The experimental results revealed that Ti-Mo carbides were formed in both of the base metals and segregation of Co and Mo in both of the weld metals before PWHT and PWHT leaded to precipitation of various carbides such as Mo carbides in the specimens. Furthermore, fine ${\gamma}^{\prime}$ particles, that were not precipitated in the specimens before PWHT, were observed in base metal as well as in the weld metal of alloy 263 after PWHT.

• Transactions of the KSME C: Technology and Education
• /
• v.4 no.2
• /
• pp.101-109
• /
• 2016

The material properties of heat resistant materials at power plants are affected by thermal aging as operating time is accumulated. In this study, the influence of thermal aging on yield strength, tensile strength and fracture behavior for Mod.9Cr-1Mo (ASME Grade 91) steel which is a material widely adopted for Generation IV nuclear energy system has been investigated and analyzed. Service exposed Gr.91 steel materials sampled from a piping system of an ultra-supercritical (USC) plant in Korea with accumulated operation time of 73,716 hours were used for material testing. The test results of the service exposed material specimens were compared with those of the virgin Gr.91 steel specimens. Those test data were compared with the material properties of ASME code and RCC-MRx code. Conservatisms of the material properties in the design codes have been quantified based on the comparisons of those from virgin and service exposed material specimens.

• Korean Journal of Plant Resources
• /
• v.33 no.2
• /
• pp.130-137
• /
• 2020

We found Diplachne fusca subsp. uninervia (J. Presl) P.M. Peterson & N. Snow, an unrecorded alien plant, in Gimpo-si, Gyeonggi-do and Ganghwa-gun, Incheon Metropolitan City. Diplachne fusca subsp. uninervia is native to North America (the USA and Mexico), Central America (Belize, Costa Rica, Honduras, and Nicaragua), the Caribbean (the Bahamas, Cuba, Jamaica, and Puerto Rico), and South America (Venezuela, Brazil, Bolivia, Ecuador, Peru, Argentina, Chile, Paraguay, and Uruguay). It is reported as an invasive species worldwide. Diplachne fusca subsp. uninervia is closely related to D. fusca subsp. fascicularis (Lam.) P.M. Peterson & N. Snow (Gaet-deu-reong-sae in Korean), an invasive species in Korea, and both are infraspecific taxa of the species D. fusca. Diplachne fusca subsp. uninervia is distinguished from D. fusca subsp. fascicularis by the small size of its spikelets, glumes, and lemmas, with apex awnless. Its common name is "Jom-gaet-deu-reong-sae" based on the short spikelets. We found that D. fusca (≡Leptochloa fusca), previously known as "Gaet-deu-reong-sae", was misapplied. It is morphologically different from D. fusca subsp. fascicularis. Therefore, we changed the scientific name of Gaet-deu-reong-sae from D. fusca (≡L. fusca) to D. fusca subsp. fascicularis based on the type specimens, original descriptions, and recent studies.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.3
• /
• pp.188-195
• /
• 2013

The morphological characters and scientific names of Korean Artemisia sect. Absinthium were reviewed based on the type specimen, the original description, observation of the living materials and voucher specimens. The form of the habitat, the structure of underground, the leaf shape and capitulum features were valuable characters in identifying the taxa. The sect. Absinthium in Korea was classified as three taxa of A. sieversiana, A. lagocephala, A. fauriei. The illustration and description of each taxa were provided. Particularly, A. fauriei in this section with hair on receptacle and A. fukudo in sect. Abrotanum without hair on receptacle grow in mixed groups on the West shore of Korea. Two species with populations which grow in mixed groups, was observed as being putative hybrid individuals based on morphological characters.

• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.1-9
• /
• 2010

Among the plant specimens requested from agricultural actual places of farmers, Agency of agricultural extension services and so forth for the diagnosis of plant virus diseases in 2009, the rate of crop types was 87.5% for vegetables, 4.0% for upland crops and 3.5% for orchids. In vegetables, the crops damaged severely by viral diseases were red pepper and tomato by the infection rate of 51.6% and 26.5%, orderly. Virus species occurring vegetables were 19 and the economically important viruses were Cucumber mosaic virus (CMV), Tomato spotted wilt virus (TSWV), Tomato yellow leaf curl virus (TYLCV), Pepper mild mottle virus (PMMoV) with the infection rate of 33.2%, 16.9%, 16.1% and 7.4%, respectively. Rice stripe virus (RSV) occurred at the whole areas of west coast in Korea in 2009, and its incidence was 14.2% mainly on the susceptible cultivars and yield loss was estimated up to 50%. TYLCV was spread at 34 areas of Si and/or Gun, 22 areas in 2009 and 12 in 2008. Distribution of TSWV was expanded newly in 6 areas of Si and/or Gun including Gangryung, Gangwondo in 2009, and its occurrence areas were 23 Si and/or Gun after first incidence at Anyang area in 2004. Tomato bushy stunt virus (TBSV) was incited newly at Gimcheon area in 2009 with the infection rate of 65.2%, and its soil transmission rate was 55.0% in average.