• Nuclear Engineering and Technology
• /
• 제37권2호
• /
• pp.191-200
• /
• 2005

Shaking table tests of the seismic behavior of a steel frame structure model were performed. The purpose of these tests was to estimate the effects of a near-fault ground motion and a scenario earthquake based on a probabilistic seismic hazard analysis for nuclear power plant structures. Three representative kinds of earthquake ground motions were used for the input motions: the design earthquake ground motion for the Korean nuclear power plants, the scenario earthquakes for Korean nuclear power plant sites, and the near-fault earthquake record from the Chi-Chi earthquake. The probability-based scenario earthquakes were developed for the Korean nuclear power plant sites using the PSHA data. A 4-story steel frame structure was fabricated to perform the tests. Test results showed that the high frequency ground motions of the scenario earthquake did not damage the structure at the nuclear power plant site; however, the ground motions had a serious effect on the equipment installed on the high floors of the building. This shows that the design earthquake is not conservative enough to demonstrate the actual danger to safety related nuclear power plant equipment.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.847-850
• /
• 2013

해양에 설치되는 플랜트는 태풍, 해일 등과 같은 환경적인 요소와 화재나 선박의 충돌 등과 같은 인공적인 요소에 의한 위협에 노출되어 있다. 본 논문에서는 이러한 위협으로부터 해양플랜트를 안전하게 보호하기 위하여 카메라, AtoN AIS를 이용한 IT융합 해양플랜트 원격 감시 시스템 설계에 관한 내용을 다룬다. 해양플랜트의 주변 환경에서 발생할 수 있는 각종 상황들을 영상 및 각종 데이터를 이용하여 원격으로 감시함으로써 보다 신속하게 적절한 대처가 가능해지며 안전한 해양플랜트의 운영에 도움을 준다.

• International journal of advanced smart convergence
• /
• 제7권1호
• /
• pp.1-6
• /
• 2018

In addition to the instability of energy import costs caused by the depletion of petroleum resources, which is a representative energy resource, and the strengthening of various regulations such as the convention on climate change, the plant for bio energy production, which is being watched as the next generation energy, and became subject of various complaints. In order to solve this problem, the bio-plant is underground and the ground is parked, making the convenience and accessibility of citizens more and more accessible. In this situation, the development of bioenergy production technology also increases the risk factor in bioenergy production process. Accordingly this paper explains method about apply the wide angle camera based AOA algorithm to the bio plant to prevent the accidents from spreading due to the lack of facilities and safety devices and the aging of the facilities and suggests a technique that can quickly identify the location and direction when it occurs.

• Journal of Computational Design and Engineering
• /
• 제1권1호
• /
• pp.13-26
• /
• 2014

Recently, renovations of plant equipment have been more frequent because of the shortened lifespans of the products, and as-built models from large-scale laser-scanned data is expected to streamline rebuilding processes. However, the laser-scanned data of an existing plant has an enormous amount of points, captures intricate objects, and includes a high noise level, so the manual reconstruction of a 3D model is very time-consuming and costly. Among plant equipment, piping systems account for the greatest proportion. Therefore, the purpose of this research was to propose an algorithm which could automatically recognize a piping system from the terrestrial laser-scanned data of plant equipment. The straight portion of pipes, connecting parts, and connection relationship of the piping system can be recognized in this algorithm. Normal-based region growing and cylinder surface fitting can extract all possible locations of pipes, including straight pipes, elbows, and junctions. Tracing the axes of a piping system enables the recognition of the positions of these elements and their connection relationship. Using only point clouds, the recognition algorithm can be performed in a fully automatic way. The algorithm was applied to large-scale scanned data of an oil rig and a chemical plant. Recognition rates of about 86%, 88%, and 71% were achieved straight pipes, elbows, and junctions, respectively.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권1호
• /
• pp.149-158
• /
• 2002

The carbonation process is affected by both the concrete material properties such as W/C ratio, types of cement and aggregates, admixture characteristics and the environmental factors such as $CO_2$ concentration, temperature, humidity. Based on results of preliminary study on carbonation, this study is to develop a carbonation prediction model by taking account of $CO_2$ concentration, temperature, humidity ad W/C ratio among major factor affecting the carbonation process. And to constitute a model formula which correspond to the mix design of the nuclear power plant, test coefficient that correspond to the design of the nuclear power plant is obtained based on the results of accelerated carbonation test. Also a field coefficient which is obtained based on results of the field examination is included to improve the conformity of the actual structures of nuclear power plant.

• Nuclear Engineering and Technology
• /
• 제40권4호
• /
• pp.269-276
• /
• 2008

Operational license of WWER-440/213 units at Paks NPP, Hungary is limited to the design lifetime of 30 years. Prolongation by additional 20 years of the operational lifetime is feasible. Moreover, enhancement of the reactor thermal power by 8% will increase both the net power output and the competitiveness of the plant. Paks NPP is a pioneer considering the power up-rate and preparation of long-term operation of WWER-440/213 design. Systematic preparatory work for long-term operation of Paks NPP has been started in 2000. A regulatory framework and a comprehensive engineering practice have been developed. According to the authors view, creation of a gapless engineering system via consequent application of best practices, and feed-back of experiences together with proper consideration of WWER-440/V213 features are the decisive elements of ensuring the safety of long-term operation. That systematic engineering approach is in the focus of recent paper. Key elements of justification and measures for ensuring the safety of long-term operation of Paks NPP WWER-440/213 units are identified and discussed. These are the assessment of plant condition and review of adequacy of ageing management programmes, also the review, validation and reconstitution of time limited ageing analyses as core tasks of licence renewal.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1176-1180
• /
• 2021

The current study relates to RADAR (RAdio Detection and Ranging) application for level measurement of vitrified radioactive liquid nuclear waste. The vitrification of radioactive liquid waste is carried out in special equipment called 'Melters'. The study is directed towards the design and frequency modulation used in the level measurement of vitrified waste. More specifically, the RADAR design and frequency used for level measurement in a melter. This level measurement technique can also be used for dynamic vitrification process and can be used to measure the level variations without using any external medium/material and using only electromagnetic waves. Also, this technique is durable and accurate even under the high radioactive environment present inside the melter.

• 시스템엔지니어링학술지
• /
• 제18권2호
• /
• pp.24-39
• /
• 2022

For the success of the plant project, it is necessary to review the project's progress through technical and business reviews at an appropriate time, such as design and construction, and determine whether to invest or to proceed with the project to manage risks. In particular, since the plant development projects are not mass-produced, trial and error in design and construction can have severe impacts in terms of cost and schedule. To this end, gate reviews are currently being conducted in plants and other industrial sectors, but there are few studies on how to conduct gate reviews suitable for the plant field. In addition, there is little literature to refer to when conducting gate reviews. So, in this study, we present an overall framework that includes the types of gate reviews to be performed and items to be checked in each gate review on small and medium-sized plant development projects in which the owner directly develops and operates plants.

• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1299-1307
• /
• 2006

This study investigates solving production problems in an automotive stamping plant using Finite Element (FE) analysis. The fundamentals of stamping, metal plasticity and FE analysis are developed. In this paper, we provide the basis for a simulation of the stamping of a production part, the automotive rear floorpan. On-plant factorial Design of Experiments (DoE) were simulated using the floorpan model. The accuracy of the simulations was undetermined because of variability in the DoE results. Predictions of flange shape, wrinkling and thickness show qualitative agreement with manufactured parts and indicate that simulating an industrial part is feasible.

• Management Science and Financial Engineering
• /
• 제5권2호
• /
• pp.25-41
• /
• 1999

This paper generalizes the classic two-stage multicommodity distribution system design problem to the one that includes plant locations as well as distribution center locations. Accommodating plant location leads to subproblems which are mixed are mixed integer. Hence. no LP-type subproblems are avail-able, and therefore standard Benders decomposition no longer applies. We develop new solution method which combines an integer L-shaped method with Benders decomposition to suit the purpose, and pre-sent the test results.