• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1093-1097
• /
• 1995

A micro ion drag pump with planar electrodes on a glass substrate is fabricated and tested. the pump consisted of a 2- dimensional electrode pair array is driven by DC voltage using unipolar conduction. Ethy alcohol is pumped in both directions, and the flow rate and the pressure are measured, in channels of depth 100 .mu m or 200 .mu. m and width fixed at 3mm. It is found that the pump could be fabricated easily and at lower cost than the micro ion drag pumps previously investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.267-272
• /
• 1998

A new signal processing technique, the directional harmonic wavelet map(dHWM), is presented to characterize the instantaneous planar motion of a measurement point in a structure from its transient complex-valued vibration signal. It is proven that the auto-dHWM essentially tracks the shape and directivity of the instantaneous planar motion, whereas the phase of the cross-dHWM indicates its inclination angle. Finally, the technique is successfully applied to an automobile engine for characterization of its transient motion during crank-on/idline/engine-off.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.311-318
• /
• 1998

In this paper, the power flow analysis(PFA) method is applied to the prediction of the vibrational energy density and intensity of coupled co-planar plates. To cover the energy transmission and reflection at the joint of the plates, the wave transmission approach is introduced with the assumption that all the incident waves are normal to the joint. By changing the frequency ranges and internal loss factors, we have obtained the PFA results, and compared them with the analytical exact solutions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1193-1196
• /
• 2007

A new planar transformer type energy recovery circuit for PDP is proposed in this paper. The same current is transferred through both the primary and secondary sides during the energy recovery period. The conduction loss is reduced. Fabrication through simple manufacturing processes is possible using the PCB winding.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.841-844
• /
• 1987

In this paper we describe a planar type SAW(surface acoustic wave) FM discriminator, in which a 3 dB multistrip coupler is used to keep the linearity of wideband FM discrimination. This discriminator without 3 dB multistrip coupler is also applicable to DPSK demodulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.531-534
• /
• 1996

In this work, we investigate the characteristics of output compliance matrix of a planar 3 degree-of-freedom parallel mechanism when joint compliances are attached to the mechanism redundantly. It is shown by simulation that by attaching redundant joint compliances symmetrically to the mechanism, the translational and rotational compliances can be arbitrarily modulated within some ranges. This property could be effectively used in the control of the compliance characteristics of actively adjustable RCC devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.718-721
• /
• 1996

In this work, an effective stiffness generated by internal loading for a planar 3 degrees of freedom RCC mechanism is investigated. For this purpose, the internal kinematic analysis and antagonistic stiffness modeling for this mechanism are performed. It is shown that the antagonistic stiffness could be effectively created at the center of the mechanism in its symmetric configuration.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.1
• /
• pp.71-76
• /
• 1994

Schottky diodes have been fabricated using the SDB wafer, and their characteristics have been investigated. For comparison, conventional planar and etched most structure were made on the same substrate. The ideality factor and barrier height of the fabricated devices are found to be 1.03 and 0.77eV, respectively. Breakdown volttge of the etched mesa Schottky diode has been increased to 180V. whereas it is 90V for the planar diode. Schottky diode with an etched mesa exhibits twice improvement in breaktown voltage.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.9-15
• /
• 1996

An electric field induced by a point dipole soruce within a conductor-backed lossy dielectric slab above the earth is calculated by anumerical method. the calcualtion is peformed on the plane which is parallel to the conductor plane and containing the point dipole soruce. Computed S$_{21}$ values of two parallel planar dipole antennas and two collinear planar dipole antennas are compared against each other, as well as the electic field magnitudes in those arrangements.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.480-484
• /
• 1999

In this paper, a design technique of SMPS using plannar transformer is described. The application of plannar transformer can solve the space problem which occurs when it is installed on PCB since plannar transformer has low profile. In addition a lossless snubber circuit added to reduce the device stress and to improve the system efficiency. The designed system is verifed by simulation and experiment with comparison of efficiency between the system using conventional transformer and the system using plannar transformer.