• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2003년도 정기총회 및 추계학술대회
• /
• pp.173-179
• /
• 2003

This study analyzes the problems, which the residential inner area has, and proposes systematic and gradual progressing improvement plan for the residential environment in the inner area. Also, planning instruction is proposed through the case study of parcel·jointed complex housing. This study can be concluded as below: (1) Improvement plans sub-divided into promoting districts and inducing districts of the residential inner area are proposed. (2) Necessity for construction of streets is proposed in order to compensate existing problems in sites. (3) Necessity of complex housings is proposed fur roadsides of household unit or small-sized annexation of parcel. (4) Collecting design examples and existing literatures, the planning guideline for jointed parcel complex housing is proposed based on the established relation with a whole surface of streets, formation and distribution of purposes and increased role of exterior space.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.735-740
• /
• 2008

Recently, the research of PM (Preventive Maintenance) method on the RCM(Reliability-Centered Maintenance) of the system equipment is being actively advanced for a few years. For the most of the current power equipment maintenance, the state of the equipment after maintenance is assumed to be becoming 'as good as new ones' state. However, the state of the power equipment is maintained like the states of the between 'as good as new ones' and 'as bad as old ones' by imperfect maintenance that implies the life decrease of the equipment by frequent breakdown, the error of maintenance process, and so on. So, the Maintenance method considering the real case has to reflect Imperfect maintenance than perfect maintenance. This paper suggests the Preventive Maintenance method by using Quasi - Renewal Theory for the gas turbine equipment as deliberating the imperfect maintenance for the real cases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1817-1818
• /
• 2008

Even though efficiency of coal-fired power plant is proportional to operating temperature, increasement of operating temperature is limited by a technological level of each power plant components. It is an alternative plan to increase operating pressure up to ultra super critical point for efficiency enhancement. It is difficult to control in that pressure within safety guideline that many unexpected phenomena are happen because that region is highly nonlinear region. In this paper, Advanced process control algorithm, ARX and Fuzzifier, is introduced. Then power plant control logics applied Unit Step Optimizer, which is combination of ARX and Fuzzifier are proposed. Its performance is tested and analyzed with design guide line.

• 물과 미래
• /
• 제6권1호
• /
• pp.13-18
• /
• 1973

If the temperature of free water drops below the freezing point the water turns into ice and its volume increases. Analyzing of the results in test, it is hoped that these is broadly used in engineering plan. The compressive strength of frozen soils and the unconfined compressive strength of the ice. The creep strength depends on factors including creep ratio, time, strain and temperature. For a linear decreases in temperature, strength predicts an exponential increasing. The relationships between dry unit weight and compressive strength, water content and freezing with compacted soil samples, have been analyzed to understand the strength of frozen soil. Therefore, it is thankful that the results of analsis shall find useful application as a framework for generalizing experimental information as well as a basis for solving various frozen soil mechanics problems.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.113-114
• /
• 2012

The productivity of the construction industry is lower than other industries. Modular system is suggested to enhance the productivity of the construction industry. Modular system is a construction method which installs units manufactured in factory on site. It enables to reduce the duration and improve the quality of the constructions. However, the construction technique applied to modular system has not overcome certain structural problems. To solve the problems and motivate the application of modular system, this study propose the hybrid system which use core to resist a lateral force.

• 유통과학연구
• /
• 제12권12호
• /
• pp.5-17
• /
• 2014

Purpose - The purpose of this study is to examine the possible ways to minimize damage by analyzing the influence that may be exerted upon the business process of the distribution industry by unexpected climate change. Research design, data, and methodology - The optimum business process is to be implemented after dividing the diversified business process of the distribution industry into the four stages of the Business Continuity Plan (BCP). Results - First, the upper-level risks that would be impacted most sensitively by climate change have been selected. Second, the impact and characteristics of the environment have been discovered. Third, weighted values by criteria item of upper-level business risks have been analyzed. Fourth, it was possible to define the business priority order based on the individual and then to adjust the Recovery Time Objective (RTO). Conclusion - In this study, the priority order has been defined quantitatively by calculating the priority order score. Further, the priority order has been determined depending on whether any targeted business unit is applicable to the items of the business nature criteria.

• 디자인학연구
• /
• 제14권2호
• /
• pp.279-292
• /
• 2001

The network drafting is introduced by american weaver Alice schlein, that is not a new weave, but a way of exploring old structures and driving them a new design. It was evident that larger scale pattern design produced on computer dobby-that is a loom without a jacquard mechanism, draw harness, or other extra patterning devices. Therefore, this study explored that developing and new weave design through the processing of network drafting In give a guide based on it In this process, the results of this study were as follow. A network is a collection of legal threading position that is constructed from a building block, called an "initial" which is the smallest identifiable unit of the threading. The process of network drafting produces large-scale designs without the chunky look of block weaves in addition In infinite potential variation on a singles threading through changes in tie-ups and dobby peg plan. It can get various new drafting through using of isolated, connected, disconnected pattern line.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.163-167
• /
• 2004

Creeks, defined by creek's improvement law, have strong localities in the flow characteristics and environmental condition. During the recent ten-years, lots of flood damages have occurred rather in the creeks. However, quantity and stream design information are poor while the national-class and local-class streams have sufficient. This causes a problem on improving the safety from flood. This study focuses on assessment of practical applicability for design flood estimation models. For this, Rational formula, Clark's model and Nakayath synthetic unit hydrograph method are estimated by data of the creek comprehensive improvement plan report, etc.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.225-231
• /
• 2005

This study aims to suggest an evaluation methodology of green-tourism potential for village level with amenity resources in rural areas. The amenity resources system was classified into three sub-classes(social, industrial, and natural/cultural/historical resources) and a relationship diagram between three classes and tourists' behavior was also defined. The methodology considers human resources in the village including the three sub-class amenity resources. The table and diagram were applied to make renewal plan for rural villages of the study area, Nami-myun, Keumsan-gun, Chungnam province, so that the development scheme for the villages was suggested reasonably by the new findings of this study.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.193-198
• /
• 2005

The solar energy floodgate which discusses will minimize a quotient bringing up for discussion friction resistance and it will do to write a disturbance power, with the base which will reach it will be able to use the solar power unit in order. It is a plan which to magnification supply the practicality and will give proof will the effort with the irrigation facility of the farming village. Magnification supply of the solar energy floodgate which it sees hazard the stack supervisor and the possibility the use against the farmer and the easy frost does the monitoring against and the work which it complements is necessary.