• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.6
• /
• pp.437-441
• /
• 2009

Purpose: In many cases, the erroneous placement of a dental implant brings about undesirable results. Here, the effect of dental implant placement on the success of the final prosthesis was evaluated from the point of view of the prosthodontist. Materials and Methods: All surgical operations were performed by the same oral surgeon with the same surgical protocol and all prosthodontic procedures were performed by the same prosthodontist. The problems faced by the prosthodontist, their causes, and their effect on prosthesis success were identified. The success of the final prostheses was evaluated by the same prosthodontist. Results: Only 53% (238 implants in 105 patients) of dental implants were not associated with prosthodontic problems. Multiple implant placement (more than three implants) was associated more frequently with prosthodontic problems. Conclusions: The data indicate that the satisfactory construction of a prosthesis is highly dependent on the placement of the dental implant in the best possible position. It is strongly recommended that the oral surgeon and the prosthodontist engage in pre-operative discussions to establish a top-down treatment plan, as this will improve implant placement and ultimately the success of the prosthesis.

• Magazine of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.29-33
• /
• 2013

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.3
• /
• pp.3-12
• /
• 2019

Since offline contact becomes a strong differentiator as online market expands, the shopping mall calls for more complex and diverse tenant combinations and deployment plan strategies. There is, however, few practical research and causal verification of Tenant Mix, i.e., the combination and placement of tenant and users' behavior, has been conducted which is a key factor in spatial configuration. In practice, Tenant Mix is limited in prediction of consumption behavior of customers by the MD planners's experience and depends only on qualitative arbitrary plan. The purpose of this study is to find out the interrelationship between the spatial configuration and the users' behavior of Tenant Mix in shopping mall, and to present an objective basis in MD planning. According to the analysis, it was possible to know that there are differences in the relationship between the spatial configuration and the users' behavior dependent on the Tenant Mix, which is the space planning of shopping mall. It was also possible to find out the characteristics and differences in the users' behavior which is dependent on the spatial configuration for each tenant. Through this study, it was possible to know the impact of space organization on the users' behavior and the interrelationship between the use's behavior and spatial configuration by tenant together with their characteristics. We prove that the current MD planning has limitation due to lack of objective research on the combination and arrangement of space in the commercial space and only done empirically. This analysis can show the practical plan of combination and placement of tenant which is emphasized in complex and larger shopping malls, and contribute to the revitalization of shopping mall by better use of tenant.

• Journal of architectural history
• /
• v.26 no.1
• /
• pp.31-44
• /
• 2017

Module coordination(分數), which is crucially relevant to plan shape of a fortress and the location of its gates and chis(雉, protruding posts), have not been thoroughly studied, despite its importance in fortress system. While plan shape of Goryeo fortress features orderly placement of gates and chis, under medium-sized J oseon fortress doesn't follow it strictly. As a result, fortresses with various plan shapes greatly outnumber those of Goryeo. Especially, Gimhaeeupseong Fortress, which is a large-scale town wall, shows such a complicated plan shape, making it difficult to figure out its modular coordination. Presumably, the reason for J oseon fortress' complicated plan shapes, which doesn't follow the orderly modular coordination, is thought to be in its various geographical conditions. Also, it seems that the building of fortress with such various and complicated plan shapes was to deter enemies from intruding by confusing them. And various plan shapes of fortress are also figured out to be pertinent to street system of towns and positions of public offices.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.2
• /
• pp.173-180
• /
• 2007

According to the increase in use of implants in clinical dentistry, new kinds of complications happen. Complications that can happen during implant placement are bleeding, nerve injury, jaw fracture, fenestration of maxillary sinus or nasal cavity, dehiscence, fenestration, injury of adjacent tooth. And complications that can happen after implant operation are infection, bleeding, hematoma, chronic sinusitis, peri-implantitis. Problems that are confronted during implant placement happen by inadequate preoperative treatment plan, inadequate consideration about individual anatomic difference, inadequate operation process and lack of experience of clinician. It is important that clinicians consider possible complications in advance and make a comprehensive treatment plan. We report the patient who was happened ramus fracture during block bone harvesting from ramus of severely atrophic mandible, the patient who came to emergency ward due to postoperative swelling and bleeding and the patient whose implant was migrated to maxillary sinus with a review of literature.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3242-3249
• /
• 2022

As Kori unit 1 is undergoing the decommissioning process, estimating the disposal amount of waste from the decommissioned nuclear reactor has become one of the challenging issues. Since the waste disposal amount estimation depends on the packing of the waste, it is highly desirable to optimize the waste packing plan. In this study, we developed an efficient scheme for packing waste component segments. The scheme consists of 1) preparing three-dimensional models of segments, 2) orienting each segment in such a way to minimize the bounding box volume, and 3) applying hybrid genetic algorithm to pack the segments in the disposal containers. When the packing solution converges in the algorithm, it comes up with the number of containers used and the placement of segments in each container. The scheme was applied to Kori-1 reactor pressure vessel. The required number of containers calculated by the developed scheme was 24 compared to 42 that was the estimation of the prior packing plan, resulting in disposal volume savings by more than 40%. The developed method is flexible for applications to various packing problems with waste segments from different cutting options and different sizes of containers.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1259-1266
• /
• 2022

Stowage planning is an essential process for safe loading by establishing, agreeing on, and systematically implementing a reasonable loading and securing method based on information on cargo, loading/unloading and the ship. In addition, depending on the plan, there may be a difference of about 14% or more in the loading amount per ship, which causes a tolerance rate and leads to an increase in sea freight charges. In this study, work environment and process standards for steel coil shipment, and classification regulations and guidelines related to steel coil shipment were analyzed. In addition, we developed a steel coil loading and placement automation system that derives an optimal loading plan through performance data-based shipping balancing and stability analysis.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.507-522
• /
• 2012

When decommissioning a nuclear power plant, it is difficult to make an appropriate plan to ensure sufficient space for temporary placement and conveyance operations of dismantling targets. This paper describes a system to support temporary placement and conveyance operations using augmented reality (AR). The system employs a laser range scanner to measure the three-dimensional (3D) information of the environment and a dismantling target to produce 3D surface polygon models. Then, the operator simulates temporary placement and conveyance operations using the system by manipulating the obtained 3D model of the dismantling target in the work field. Referring to the obtained 3D model of the environment, a possible collision between the dismantling target and the environment is detectable. Using AR, the collision position is presented intuitively. After field workers evaluated this system, the authors concluded that the system is feasible and acceptable to verify whether spaces for passage and temporary storage are sufficient for temporary placement and conveyance operations. For practical use in the future, some new functions must be added to improve the system. For example, it must be possible for multiple workers to use the system simultaneously by sharing the view of dismantling work.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.21-34
• /
• 2015

In this study, a reference model is constructed that provides architects or designers with sufficient information on the intelligent service facility that is essential for U-City space configuration, and for the support of enhanced design, as well as for planning activities. At the core of the reference model is comprehensive information about the intelligent service facility that plans the content of services, and the latest related information that is regularly updated. A plan is presented to take advantage of the database of list information systems in the Public Procurement Service that handles intelligent service facilities. We suggest a number of improvements by analyzing the current status of, and issues with, the goods information in the Public Procurement Service, and by conducting a simulation for the proper placement of CCTV. As the design of U-City plan has evolved from IT technology-based to smart space-based, reviews of limitations such as the lack of standards, information about the installation, and the placement of the intelligent service facility that provides U-service have been carried out. Due to the absence of relevant legislation and guidelines, however, planning activities, such as the appropriate placement of the intelligent service facility are difficult when considering efficient service provision. In addition, with the lack of information about IT technology and intelligent service facilities that can be provided to U-City planners and designers, there are a number of difficulties when establishing an optimal plan with respect to service level and budget. To solve these problems, this study presents a plan in conjunction with the goods information from the Public Procurement Service. The Public Procurement Service has already built an industry-related database of around 260,000 cases, which has been continually updated. It can be a very useful source of information about the intelligent service facility, the ever-changing U-City industry's core, and the relevant technologies. However, since providing this information is insufficient in the application process and, due to the constraints in the information disclosure process, there have been some issues in its application. Therefore, this study, by presenting an improvement plan for the linkage and application of the goods information in the Public Procurement Service, has significance for the provision of the basic framework for future U-City enhancement plans, and multi-departments' common utilization of the goods information in the Public Procurement Service.

• Journal of Engineering Education Research
• /
• v.14 no.2
• /
• pp.51-59
• /
• 2011

The wide range of the Freshmen English placement test scores implies the necessity of differentiating classes. However without a careful and detailed plan, there could be trial and error which would cause harmful and complicated troubles to students. This paper will report a case of grouping Freshmen for English classes at the Engineering College of a provincial university. The main procedures include preparing and executing the placement test, grouping classes, preparing and executing a common final test, preparing grading policy, and reporting. Each procedure is going to be explained and evaluated to improve the quality of English classes and the ability of students at the Engineering College.