• 제목/요약/키워드: Pivot

검색결과 362건 처리시간 0.038초

고속열차 동력차의 센터피봇 상대 회전각 계측에 관한 연구 (A Study on the Measurement of Relative Rotation of Center Pivot in Power Car of KTX)

  • 서승일;정우진
    • 한국철도학회논문집
    • /
    • 제9권3호
    • /
    • pp.277-281
    • /
    • 2006
  • The center pivot in the power car of KTX carries the traction force of the motor bogie to the carbody. The damage to the center pivot due to failure of swivel joint causes a serious hazard of the train. To prevent the hazard, information on the relative motion between bogie and carbody is necessary. In this paper, a method to measure the relative rotation of the center pivot is proposed and an actual test to verify the method and safety is conducted. The test results show that the rotation of the center pivot is within the allowable limit and the damage due to the relative motion doesn't take place.

HDD 회전형구동장치의 피봇비선형성 측정 및 모델링 (Pivot Nonlinearity in Disk Drive Rotary Actuator : Measurement and Modeling)

  • 박재흥;변용규;장흥성;노광춘
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.419-424
    • /
    • 1996
  • As track density increases, the effects of nonlinearity in pivot bearing of hard disk drive on the servo performance are becoming more important in considering the range of inertia force and the input torque during settling and tracking mode. Recently, an increasing attention is given to more precise experimental observations and modelings of pivot nonlinearity for achieving higher performance of servo control. In this paper, we propose a new model that shows an improved prediction of the pivot nonlinearity than existing preload-plus-two-slope model at matching simulations and experimental results in both time and frequency domains. Experimental measurements are carried out to validate and identify the specific nonlinearity presents in the pivot bearing when its in fine motion. Using the experimental results new model along with the existing one are characterized and compared for relevancies.

  • PDF

Hertzian contact force에 의한 HDD pivot ball bearing의 동적 반응 분석 (Dynamic response of a HDD pivot ball bearing acted by Hertzian contact force)

  • 윤주영;박노철;임건엽;박영필
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.993-993
    • /
    • 2014
  • Increasing the density magnetic recording of a hard disk drive needs to improve position control of a slider. We have troubles analyzing position of a slider by nonlinear property of pivot ball bearing. Many researches analyze a hard disk drive to change pivot ball bearing part from balls to springs. Pivot ball bearing operates by rotation and movement of balls. This study considers Hertzian contact force when balls contact with outer race to analyze nonlinear movement of a ball bearing. Experiment of this study measures movement of a circular center of a pivot ball bearing. We also verify the simulation results and the experiment results.

  • PDF

평면 다물체 동역학 해석을 이용한 건설장비 작업장치의 링크 피봇점 설계 지원 프로그램 개발 (Development of a Design Support Program for Pivot Points of Working Devices in Construction Equipment using Planar Multi-body Dynamic Analysis)

  • 박현규;장진석;유완석;김민석;이희종;이재욱
    • 한국기계가공학회지
    • /
    • 제14권6호
    • /
    • pp.49-56
    • /
    • 2015
  • For designing working devices of construction equipment, it is necessary to consider not only sufficient working ability but also available working range. Therefore, it is important to select the appropriate pivot positions of links. This paper presents a study on selection of pivot points of links used in construction equipment. To analyze the effect of each pivot point, a design program for pivot selection is developed. A conventional pivot design method requires a complicated process because it needs to create a certain working position manually to evaluate its performance. However, the developed program includes an automatic link assembly algorithm; thus, the working device can easily be analyzed by using pivot information of links. The developed program also included a kinematic/static analysis module and characteristic analysis algorithms. Therefore, it is possible to easily analyze a working device model created through the automatic assembly algorithm, whereby users can easily analyze the effect of each link pivot point for the actual product design.

추축장치에 의한 악관절강폭의 변화에 관한 연구 (The Change of Space Width in the Temporomandibular Joint by Pivot Spint)

  • Min-Ho Kim;Kyung-Soo Han;Min Shin
    • Journal of Oral Medicine and Pain
    • /
    • 제20권1호
    • /
    • pp.159-169
    • /
    • 1995
  • The purpose of this study was investigating the effects of pivot splint on width of the temporomandibular joint space in order to get the basic data for clinical applications. Pivot splint could be used for treating the patients with temporomandibular disorders, especially for chronic closed lock which would not be reduced by joint manipulation or with other methods. So it is necessary to have a lot of underlying data for using pivot splint, but there is few available reports related to mechanical principle or clinical results of the splint. Healthy twenty dental students wee collected for this study and pivot splint with 2.5mm high right-side pivot was used. Next, transcanial projection was taken and width of joint space at there mandibular positions were measured : habitual occlusion position, clenching position with splint, and clenching position with splint and mandibular force. The data were processed with SAS statistical program. The obtained results were as follows : 1. Ipsilateral posterior joint space width was increased on clenching the pivot splint, but joint space widths of contralateral side were not significantly changed. 2. Superior and posterior joint space width were increased on clenching the pivot splint with mandibualr force on both ipsilateral and contralateral side. 3. Ipsilateral joint space widths were not significantly changed from habitual occlusion position to clenching the pivot splint with active mandibular force, but in case of with passive mandibular force, posterior joint space width was significantly increased. 4. Correlationships between mandibular positions were more significant at anterior joint space than at superior or posterior joint space. But the correlation between clenching and clenching with mandibular force was significant at all the three joint space.

  • PDF

≪영추(靈樞)·구침십이원(九鍼十二原)≫의 "부기지재맥야(夫氣之在脈也)"구절에 대한 소고(小考) (Thoughts on the phrase "夫氣之在脈也" of Miraculous Pivot(靈樞)·Nine needles and Twelve sources(九鍼十二原))

  • 정창현
    • 대한한의학원전학회지
    • /
    • 제27권4호
    • /
    • pp.21-27
    • /
    • 2014
  • Objectives : Among the translations of the verse "Sa-gi is on the upper side, Tak-gi is on the middle side, Cheong-gi is on the under side(邪氣在上, 濁氣在中, 淸氣在下)" in the texts of Miraculous Pivot(靈樞) Nine needles and Twelve sources(九鍼十二原), the meanings of 'Ham-maek(陷脈)' and 'Joong-maek(中脈)' have contradictory versions. Methods : This study will identify the actual meaning of this verse through analysis of the phrase "夫氣之在脈也", followed by examination of the relationship between the meaning of "three-stratum puncture(三刺)" in the chapters Miraculous Pivot Handling needle(官鍼), Miraculous Pivot Jong-si(終始) and the meaning of "刺有三變" of Miraculous Pivot Longevity and character(壽夭剛柔), after which its application in later periods will be discussed. Results : The words 'Sa-gi', 'Tak-gi' and 'Cheong-gi' in the phrase "夫氣之在脈也" of Miraculous Pivot Nine needles and Twelve sources each correspond to the words 'yang pathogens(陽邪)', 'yin pathogens(陰邪)' and 'essence derived from food(穀氣)' of Miraculous Pivot 終始, respectively. Conclusions : The Upper-Middle-Lower of the phrase "夫氣之在脈也" in Nine needles and Twelve sources indicates the three levels of depth, in which 'Sa-gi', 'Tak-gi' and 'Cheong-gi' each dwell. 'Ham-maek' and 'Joong-maek' are categorizations according to the depth of needling.

Extended pivot-based approach for bilingual lexicon extraction

  • Seo, Hyeong-Won;Kwon, Hong-Seok;Kim, Jae-Hoon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제38권5호
    • /
    • pp.557-565
    • /
    • 2014
  • This paper describes the extended pivot-based approach for bilingual lexicon extraction. The basic features of the approach can be described as follows: First, the approach builds context vectors between a source (or target) language and a pivot language like English, respectively. This is the same as the standard pivot-based approach which is useful for extracting bilingual lexicons between low-resource languages such as Korean-French. Second, unlike the standard pivot-based approach, the approach looks for similar context vectors in a source language. This is helpful to extract translation candidates for polysemous words as well as lets the translations be more confident. Third, the approach extracts translation candidates from target context vectors through the similarity between source and target context vectors. Based on these features, this paper describes the extended pivot-based approach and does various experiments in a language pair, Korean-French (KR-FR). We have observed that the approach is useful for extracting the most proper translation candidate as well as for a low-resource language pair.

『황제내경(黃帝內經)』의 소양주골(少陽主骨)의 의미에 대한 고찰(考察) (A Study on the Meaning of Shaoyangzhugu(少陽主骨) in Huangdineijing)

  • 신상원
    • 대한한의학원전학회지
    • /
    • 제31권1호
    • /
    • pp.95-112
    • /
    • 2018
  • Objectives : This paper tried to explain the meaning of Shaoyangzhugu in Huangdineijing. Methods : The opinions on these matters that can be found in the past studies are analyzed to assess the strengths and limitations of today's explanations on the meaning of Shaoyangzhugu. Furthermore, this study attempted to suggest a more rational way of understanding that can supplement the opinions before. Results : The opinions that fail to provide a rational explanation on Shaoyangzhugu were disposed. It was found that the explanation of Shaoyangzhugu through the Shaoyang's pivot function has a potential of providing a rational understanding of Shaoyangzhugu. Following this, this study made a deduction based on the functions of gallbladder found in the Huangdineijing and explained the Shaoyang's pivot function. This study then proceeded to provide an explanation regarding Shaoyangzhugu based on this. Conclusions : Shaoyangzhugu in Huangdineijing is a function to maintain homeostasis of the skeleton of the whole body by Shaoyang's pivot function.

ADAMS를 이용한 가동 노즐 성능 평가 기법 (Movable Nozzle Performance Analysis by Using ADAMS)

  • 김중근;장홍빈
    • 한국추진공학회지
    • /
    • 제13권4호
    • /
    • pp.30-35
    • /
    • 2009
  • 추진기관의 추력 방향을 조절하기 위해 널리 적용되고 있는 flexible seal 노즐에서, 노즐의 회전 중심인 유효 피봇의 위치 변화가 노즐의 구동성능에 미치는 영향을 컴퓨터를 이용한 수치실험으로 분석하였다. 실험 조건은 two-level factorial design ($2^3$-Design)의 실험계획으로 결정하고, 실험은 범용 동력학 해석 프로그램인 ADAMS를 적용하였다. 해석결과, 유효 피봇의 반경 방향 위치 변화가 축 방향 위치 변화보다 구동성능에 미치는 영향이 컸으며, 유효 피봇의 위치 변화가 구동 성능에 미치는 영향은 구동방식에 크게 영향을 받음을 확인하였다.

볼 소켓형 피봇을 갖는 틸팅 패드 저널 베어링의 성능 예측 및 기존 결과와의 비교 (Performance Predictions of Tilting Pad Journal Bearing with Ball-Socket Pivots and Comparison to Published Test Results)

  • 김태호;최태규
    • 한국유체기계학회 논문집
    • /
    • 제20권2호
    • /
    • pp.63-68
    • /
    • 2017
  • This paper predicts the rotordynamic force coefficients of tilting pad journal bearings (TPJBs) with ball-socket pivot and compares the predictions to the published test data obtained under load-between-pad (LBP) configuration. The present TPJB model considers the pivot stiffness calculated based on the Hertzian contact stress theory. Due to the compliance of the pivot, the predicted journal eccentricity agree well with the measured journal center trajectory for increasing static loads, while the early prediction without pivot model consideration underestimates it largely. The predicted pressure profile shows the significant pressure development even on the unloaded pads along the direction opposite to the loading direction. The predicted stiffness coefficients increase as the static load and the rotor speed increase. They agree excellently with test data from open literature. The predicted damping coefficients increase as the static load increases and the rotor speed decreases. The prediction underestimates the test data slightly. In general, the current predictive model including the pivot stiffness improves the accuracy of the rotordynamic performance predictions when compared to the previously published predictions.