• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.84-91
• /
• 2005

We measured the pitch of one-dimensional (ID) grating specimens using a metrological atomic force microscope (M-AFM). The ID grating specimens a.e often used as a magnification standard in nano-metrology, such as scanning probe microscopy (SPM) and scanning electron microscopy (SEM). Thus, we need to certify the pitch of grating specimens fur the meter-traceability in nano-metrology. To this end, an M-AFM was setup at KRISS. The M-AFM consists of a commercial AFM head module, a two-axis flexure hinge type nanoscanner with built-in capacitive sensors, and a two-axis heterodyne interferometer to establish the meter-traceability directly. Two kinds of ID grating specimens, each with the nominal pitch of 288 nm and 700 nm, were measured. The uncertainty in pitch measurement was evaluated according to Guide to the Expression of Uncertainty in Measurement. The pitch was calculated from 9 line scan profiles obtained at different positions with 100 ㎛ scan range. The expanded uncertainties (k = 2) in pitch measurement were 0.10 nm and 0.30 nm for the specimens with the nominal pitch of 288 nm and 700 nm. The measured pitch values were compared with those obtained using an optical diffractometer, and agreed within the range of the expanded uncertainty of pitch measurement. We also discussed the effect of averaging in the measurement of mean pitch using M-AFM and main components of uncertainty.

• 음성과학
• /
• 제5권1호
• /
• pp.49-62
• /
• 1999

This study is concerned with the educational program Visual Analysis Tool (VAT) for sound development for foreign intonation using personal computer. The VAT can run on IBM-PC 386 compatible or higher. It shows the spectrogram, waveform, intensity and the pitch contour. The system can work freely on either waveform zoom in-out or the documentation of measured value. In this paper, intensity and pitch contour information were used. Twelve French sentences were recorded from a French conversational tape. And three Korean participated in this study. They spoke out twelve sentences repeatly and trid to make the same pitch contour - by visually matching their pitcgh contour to the native speaker's. A sentences were recorded again when the participants themselves became familiar with intonation, intensity and pauses. The difference of pitch contour(rising or falling), pitch value, energy, total duration of sentences and the boundary of rhythmic group between native speaker's and theirs before and after training were compared. The results were as following: 1) In a declarative sentence: a native speaker's general pitch contour falls at the end of sentences. But the participant's pitch contours were flat before training. 2) In an interrogative: the native speaker made his pitch contours it rise at the end of sentences with the exception of wh-questions (qu'est-ce que) and a pitch value varied a greath. In the interrogative 'S + V' form sentences, we found the pitch contour rose higher in comparison to other sentences and it varied a great deal. 3) In an exclamatory sentence: the pitch contour looked like a shape of a mountain. But the participants could not make it fall before or after training.

• Carbon letters
• /
• 제12권3호
• /
• pp.167-170
• /
• 2011

Petroleum pitch-based activated carbons (ACs) were obtained in this work from a combination of pretreatment with different amounts of potassium permanganate ($KMnO_4$) and chemical activation with potassium hydroxide. The surface characteristics of the pitch after the $KMnO_4$ pretreatment were characterized by means of Fourier transform infrared spectroscopy (FT-IR). The structural characteristics of the pitch after the $KMnO_4$ pretreatment were determined by means of X-ray diffraction. The influence of the $KMnO_4$ treatment on the textural properties of the petroleum pitch-based ACs was investigated by means of $N_2$/77K adsorption isotherms. The investigation also involved the use of the Brunauer-Emmett-Teller equation and the Dubinin-Radushkevich method. The FT-IR results show that the pretreatment promotes the formation of surface oxygen functionalities and leads to an increase of the interplanar distance ($d_{002}$) of the functional groups induced between carbon layers. Moreover, the specific surface area of the pitch-based ACs increases in proportion to the amount of $KMnO_4$ pretreatment and reaches its highest value of 2334 $m^2$/g with 2 g of $KMnO_4$ because the surface oxygen groups of the pitch act as an active site during chemical activation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.13-21
• /
• 2016

Parametric pitch instability of a Deep Draft Semi-submersible platform (DDS) is investigated in irregular waves. Parametric pitch is a form of parametric instability, which occurs when parameters of a system vary with time and the variation satisfies a certain condition. In previous studies, analyzing of parametric instability is mainly limited to regular waves, whereas the realistic sea conditions are irregular waves. Besides, parametric instability also occurs in irregular waves in some experiments. This study predicts parametric pitch of a Deep Draft Semi-submersible platform in irregular waves. Heave motion of DDS is simulated by wave spectrum and response amplitude operator (RAO). Then Hill equation for DDS pitch motion in irregular waves is derived based on linear-wave theory. By using Bubnov-Galerkin approach to solve Hill equation, the corresponding stability chart is obtained. The differences between regular-waves stability chart and irregular-waves stability chart are compared. Then the sensitivity of wave parameters on DDS parametric pitch in irregular waves is discussed. Based on the discussion, some suggestions for the DDS design are proposed to avoid parametric pitch by choosing appropriate parameters. The results indicate that it's important and necessary to predict DDS parametric pitch in irregular waves during design process.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1152-1155
• /
• 2013

A cost-effective and simple solder on pad (SoP) process is proposed for a fine-pitch microbump interconnection. A novel solder bump maker (SBM) material is applied to form a 60-${\mu}m$ pitch SoP. SBM, which is composed of ternary Sn3.0Ag0.5Cu (SAC305) solder powder and a polymer resin, is a paste material used to perform a fine-pitch SoP through a screen printing method. By optimizing the volumetric ratio of the resin, deoxidizing agent, and SAC305 solder powder, the oxide layers on the solder powder and Cu pads are successfully removed during the bumping process without additional treatment or equipment. Test vehicles with a daisy chain pattern are fabricated to develop the fine-pitch SoP process and evaluate the fine-pitch interconnection. The fabricated Si chip has 6,724 bumps with a 45-${\mu}m$ diameter and 60-${\mu}m$ pitch. The chip is flip chip bonded with a Si substrate using an underfill material with fluxing features. Using the fluxing underfill material is advantageous since it eliminates the flux cleaning process and capillary flow process of the underfill. The optimized bonding process is validated through an electrical characterization of the daisy chain pattern. This work is the first report on a successful operation of a fine-pitch SoP and microbump interconnection using a screen printing process.

• Carbon letters
• /
• 제25권
• /
• pp.89-94
• /
• 2018

In this study, we tried to prepare an isotropic spinnable pitch which can be useful to prepare the general purpose carbon fiber through the co-carbonization of biomass tar with ethylene bottom oil under two different preparation methods (atmospheric distillation, pressurized distillation). The results showed that the ethylene bottom oil added co-carbonization was very effective to decrease of the oxygen contents for obtaining a stable spinnable pitch. The pressurized distillation was more effective to reduce the oxygen functional groups of pitches than atmospheric distillation. The obtained spinnable pitch by the pressurized distillation showed higher pitch yield of 42% and lower oxygen content of 9.12% than the spinnable pitch by the atmospheric distillation. The carbon fiber derived from the pressurized distillation spinnable pitch by carbonization at $800^{\circ}C$ for 5 min showed that the higher tensile strength of carbon fiber was increased up to 800 MPa.

• 마이크로전자및패키징학회지
• /
• 제21권3호
• /
• pp.1-6
• /
• 2014

차세대 전자소자는 입출력(I/O) 핀 수의 증가, 전력소모의 감소, 소형화 등으로 인해 fine-pitch 배선 시스템이 요구되고 있다. Fine-pitch 특히 10 um 이하의 fine-pitch에서는 기존의 무연솔더나 Cu pillar/solder cap 구조를 사용할 수 없기 때문에 Cu-to-Cu bumpless 배선 시스템은 2D/3D 소자 구조에서 매우 필요한 기술이라 하겠다. Bumpless 배선 기술로는 BBUL 기술, 접착제를 이용한 WOW의 본딩 기술, SAB 기술, SAM 기술, 그리고 Cu-to-Cu 열압착 본딩 기술 등이 연구되고 있다. Fine-pitch Cu-to-Cu interconnect 기술은 연결 방법에 상관없이 Cu 층의 불순물을 제거하는 표면 처리 공정, 표면 활성화, 표면 평탄도 및 거칠기가 매우 중요한 요소라 하겠다.

• Carbon letters
• /
• 제15권2호
• /
• pp.129-135
• /
• 2014

Spinnable pitch for melt-electrospinning was obtained from pyrolized fuel oil by electron beam (E-beam) radiation treatment. The modified pitch was characterized by measuring its elemental composition, softening point, viscosity, molecular weight, and spinnability. The softening point and viscosity properties of the modified pitch were influenced by reforming types (heat or E-beam radiation treatment) and the use of a catalyst. The softening point and molecular weight were increased in proportion to absorbed doses of E-beam radiation and added $AlCl_3$ due to the formation of pitch by free radical polymerization. The range of the molecular weight distribution of the modified pitch becomes narrow with better spinning owing to the generated aromatic compounds with similar molecular weight. The diameter of melt-electrospun pitch fibers under applied power of 20 kV decreased 53% ($4.7{\pm}0.9{\mu}m$) compared to that of melt-spun pitch fibers ($10.2{\pm}2.8{\mu}m$). It is found that E-beam treatment for reforming could be a promising method in terms of time-savings and cost-effectiveness, and the melt-electrospinning method is suitable for the preparation of thinner fibers than those obtained with the conventional melt-spinning method.

• 융합신호처리학회논문지
• /
• 제7권4호
• /
• pp.178-183
• /
• 2006

As a lot of researches on the speech signal processing are performed due to the recent rapid development of the information-communication technology. the pitch period is used as an important element to various speech signal application fields such as the speech recognition. speaker identification. speech analysis. or speech synthesis. A variety of algorithms for the time and the frequency domains related with such pitch period detection have been suggested. One of the pitch detection algorithms for the time domain. AMDF (average magnitude difference function) uses distance between two valley points as the calculated pitch period. However, it has a problem that the algorithm becomes complex in selecting the valley points for the pitch period detection. Therefore, in this paper we proposed the modified AMDF(M-AMDF) algorithm which recognizes the entire minimum valley points as the pitch period of the speech signal by using the rotation transform of AMDF. In addition, a threshold is set to the beginning portion of speech so that it can be used as the selection criteria for the pitch period. Moreover the proposed algorithm is compared with the conventional ones by means of the simulation, and presents better properties than others.

• 한국방사선학회논문지
• /
• 제14권7호
• /
• pp.981-989
• /
• 2020

본 연구는 Pitch의 변화에 따른 CT 감약계수(CT Number)와 잡음(Noise)의 변화를 정량적으로 측정하고자 자체 제작한 맞춤형 팬텀(Customized Phantom)을 사용하였다. 팬텀을 이용한 영상의 획득을 위해 팬텀 내부는 멸균증류수로 가득 채웠다. 유리관 내부에는 생리식염수와 조영제의 비율을 각각 생리식염수 100%, 400:1, 200:1, 100:1, 50:1로 희석한 용액을 담은 후 영상화하였고, 이때 용액의 희석비율별로 pitch를 0, 0.35, 0.7, 1.05, 1.4의 단계로 나누어 각각 영상화하였다. 희석비율별로 모든 ROI에서 측정한 CT number와 noise 값의 평균이 pitch의 변화에 따라 유의한 차이를 보이는지 검증하고자 일원 배치 분산분석(One-way ANOVA Analysis)과 사후검정을 시행하였다. 실험 결과 각 희석비율별 pitch의 변화에 대한 CT number의 변화는 통계적으로 유의한 차이가 없었지만, noise 값은 pitch의 증가에 따라 증가하는 경향을 보였으며, 통계적으로도 유의한 차이를 보이는 것으로 나타났다. 나선형 영상획득 방식은 pitch에 따라 noise가 유의한 수준으로 달라질 수 있다. 따라서 나선형 영상획득 방식을 적용한 CT 영상의 화질평가 항목과 기준을 설정할 필요가 있을 것이다.