References
- A. Yu et al., "Fabrication of High Aspect Ratio TSV and Assembly with Fine-Pitch Low-Cost Solder Microbump for Si Interposer Technology with High-Density Interconnects," IEEE Trans. Comp. Packag. Manufact. Technol., vol. 1, no. 9, Sept. 2011, pp. 1336-1344. https://doi.org/10.1109/TCPMT.2011.2155655
- Y. Orii et al., "Ultrafine-Pitch C2 Flip Chip Interconnections with Solder-Capped Cu Pillar Bumps," Proc. Electron. Comp. Technol. Conf., 2009, pp. 948-953.
- K.-S. Choi et al., "Novel Maskless Bumping Material for 3D Integration," ETRI J., vol. 32, no. 2, Apr. 2010, pp. 342-344. https://doi.org/10.4218/etrij.10.0209.0396
- K.-S. Choi et al., "Novel Bumping Material for Solder-on-Pad Technology," ETRI J., vol. 33, no. 4, Aug. 2011, pp. 637-640. https://doi.org/10.4218/etrij.11.0210.0298
- Y.-S. Eom et al., "Characterization of a Hybrid Cu Paste as an Isotropic Conductive Adhesive," ETRI J., vol. 33, no. 6, Dec. 2011, pp. 864-870. https://doi.org/10.4218/etrij.11.0110.0520
- IPC Std. J-STD-005, "Requirements for Soldering Pastes."
- K.-J. Sung et al., "Novel Bumping and Underfill Technologies for 3D IC Integration," ETRI J., vol. 34, no. 5, Oct. 2012, pp. 706-712. https://doi.org/10.4218/etrij.12.0112.0104
- K.-S. Choi et al., "Novel Bumping Process for Solder on Pad Technology," ETRI J., vol. 35, no. 2, Apr. 2013, pp. 340-343. https://doi.org/10.4218/etrij.13.0212.0302
- Y.-S. Eom et al., "Optimization of Material and Process for Fine Pitch LVSoP Technology," ETRI J., vol. 35, no. 4, Aug. 2013, pp. 625-631. https://doi.org/10.4218/etrij.13.1912.0007
- Y.-S. Eom et al. "Characterization of Polymer Matrix and Low Melting Point Solder for Anisotropic Conductive Film," Microelectron. Eng., vol. 85, 2008, pp. 327-331. https://doi.org/10.1016/j.mee.2007.07.005
- J.-W. Baek et al., "Chemo-rheological Characteristic of a Self- Assembling Anisotropic Conductive Adhesive System Containing a Low-Melting Point Solder," Microelectron. Eng., vol. 87, 2010, pp. 1968-1972. https://doi.org/10.1016/j.mee.2009.12.020
- K.-S. Jang et al., "Catalytic Behavior of Sn/Bi Metal Powder in Anhydride-Based Epoxy Curing," J. Nanosci. Nanotechnol., vol. 9, no. 12, 2009, pp. 7461-7466.
- Y.-S. Eom et al., "Electrical Interconnection with a Smart ACA Composed of Fluxing Polymer and Solder Powder," ETRI J., vol. 32, no. 3, June 2010, pp. 414-421. https://doi.org/10.4218/etrij.10.0109.0400
Cited by
- Characterization and Estimation of Solder-on-Pad Process for Fine-Pitch Applications vol.4, pp.10, 2013, https://doi.org/10.1109/tcpmt.2014.2354049
- HV-SoP Technology for Maskless Fine-Pitch Bumping Process vol.37, pp.3, 2013, https://doi.org/10.4218/etrij.15.0114.0578
- Interconnection Technology Based on InSn Solder for Flexible Display Applications vol.37, pp.2, 2013, https://doi.org/10.4218/etrij.15.0114.0167
- Sn58Bi Solder Interconnection for Low-Temperature Flex-on-Flex Bonding vol.38, pp.6, 2013, https://doi.org/10.4218/etrij.16.0115.0945
- Characterization of transmission lines with through-silicon-vias and bump joints on high-resistivity Si interposers for RF three-dimensional modules vol.55, pp.6, 2016, https://doi.org/10.7567/jjap.55.06jc01
- Study the Electrical Properties of Surface Mount Device Integrated Silver Coated Vectran Yarn vol.15, pp.1, 2013, https://doi.org/10.3390/ma15010272