• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.169-177
• /
• 1995

The diffusion barrier property of 100-nm-thick titanium nitride (TiN) film between Cu and Si was investigated using sheet resistance measurements, etch-pit observation, x-ray diffractometry, Auger electron spectroscopy, and transmission electron microscopy. The TiN barrier fails due to the formation of crystalline defects (dislocations) and precipitates (presumably Cu-silicides) in the Si substrate which result from the predominant in-diffusion of Cu through the TiN layer. In contrast with the case of Al, it is identified that the TiN barrier fails only the in-diffusion of Cu because there is no indication of Si pits in the Si substrate. In addition, it appears that the stuffing of TiN does not improve the diffusion barrier property in the Cu/TiN/Si structure. This indicates that in the case of Al, the chemical effect that impedes the diffusion of Al by the reaction of Al with $TiO_{2}$ which is present in the grain boundaries of TIN is very improtant. On the while, in the case of Cu, there is no chemical effect because Cu oxides, such as $Cu_{2}O$ or CuO, is thermodynamically unstable in comparison with $TiO_{2}$. For this reason, it is considered that the effect of stuffing of TiN on the diffusion barrier property is not significant in the Cu/ TiN/Si structure.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.260-265
• /
• 2002

Microbiologically influenced Corrosion (MIC) is one of the most deleterious effects of metal microbe interactions. When a fresh metal surface comes in contact with a non-sterile fluid, biofilm formation is ensued. This might result in the initiation of corrosion. The sites and materials where MIC is implicated are versatile. Industries such as shipping, power generation, chemical etc are reported to be affected. The rapid and unexpected failure of AISI type 304 stainless steel was investigated in the laboratory by simulation studies for a period of 4 months. Slime and water samples from the failure site were screened for corrosion causing bacteria. Both aerobic and anaerobic nora were enumerated and identified using PCR techniques. Pseudomonas sp. and Bacillus sp. were the most common aerobic bacteria isolated from the water and slime samples, whilst sulfate reducing bacteria (SRB) were the major anaerobic bacteria. The aerobic bacteria were used for the corrosion experiments in the laboratory. Coupon exposure studies were conducted using a very dilute (0.1%V/V) nutrient broth medium. The coupons after retrieval were observed under a Scanning Electron Microscope (SEM) for the presence of MIC pits. Compared to sterile controls, metal coupons exposed to Pseudomonas sp and Bacillus sp. showed the initiation of severe pitting corrosion. However, amongst these two strains, Psudomonas sp. caused pits in a very short span of 14 days. Towards the end of the experiment, severe pitting was observed in both the cases. The detailed observation of pits showed they vary both in number and shapes. Whilst the coupons exposed to Bacillus sp. showed widely spread scales like pits, those exposed to Pseudomonas sp. showed smaller and circular pits, which had grown in number and size by the end of the experiment. From these results it is inferred that the rapid and unexpected failure of 304 SS might be due to MIC. Pseudonwnas sp. could be considered as the major responsible bacteria that could initiate pits in the metallic structures. As the appearance of pits was different in both the tested strains, it was thought that the mechanisms of pit formation are different. Experiments on these lines are being continued.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.10-19
• /
• 1992

Mn - Zn Ferrite has physical properties of the high initial permeability, saturation magnetic flux density, and low loss factor as a representative magnetic material of soft ferrites, in addition the mechanical property is excellent as a single crystal. Therefore it is important electronic components and used for VTR Head. Mn - Zn Ferrite single crystals with the diameter 8mm were grown in atmosphere mixed with $O_2$ and Ar gas by the Floating Zone(FZ) method that impurities can not be incorporated to the crystals because of not-using the crucible to put in the melt, and the sharp temperature gradient results from making a focus at one point utilizing the infrared ray emitted from the halogen lamp as a heat source. During the crystal growing, the highest temperature of melting area was maintained to be $1650^{\circ}C$, growth rate and rotation rate were 10 mm/hr, 20 rpm respectively. The phases and the growth directions of crystals were determined from the analysis of X RD patterns, Laue, TEM diffraction patterns and etch pit shapes were observed by the optical microscope through the chemical etching. The corelation of optimum conditions for acquiring the better crystals was found out with the growth rate, the length and diameter of melt at the interface according to the diameter of feed rod, and the patterns of growing interface also studied.

• Journal of Oriental Neuropsychiatry
• /
• v.26 no.2
• /
• pp.117-130
• /
• 2015

Objectives: Banhahoobak-tang has been used to treat plum-pit qi, chest and hypochondriac distension, moist or greasy tongue coat, and wiry slow or wiry slippery pulse. It might be used to control coughing and vomiting. We observed that Banhahoobak-tang extract (BHTe) had anti-psychological stress effect. The objective of this study was to determine the effect of BHTe on restoring the transcriptional regulation of genes related to psychological stress. Methods: After giving psychological stress to mice, BHTe was orally administered at 100 mg/kg/day for five days. After extracting whole brain tissue from the mice, the gene expression changes were determined by microarray. Transcription factor binding site (TFBS) analysis showed up- and down-regulated genes related to psychological stress were protected by BHTe and segregated according to the structure of TFBS. We performed text based Pubmed search to select significant target genes involved in psychological stress affected by BHTe. Results: 1. Serum corticosterone level was decreased in the BHTe administered group, although the psychological stress was increased. 2. The BHTe administered group had no significant change in noradrenaline content in brain tissue, but the psychological stress group had decreased level. 3. The BHTe administered group had increased time of staying at open-arm than the psychological stress group. 4. Microarray revealed that TANK and RARA genes were up-regulated genes while AES, CDC42, FOS, NCL, and PVR were down-regulated genes by psychological stress but restored by BHTe.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.4
• /
• pp.265-276
• /
• 2007

The 13 major blast resistance(R) genes against Magnaporthe grisea were screened in a number of Korean rice varieties using molecular markers. Of the 98 rice varieties tested, 28 were found to contain the Pia gene originating from Japanese japonica rice genotypes. The Pib gene from BL1 and BL7 was incorporated into 39 Korean japonica varieties, whereas this same gene from the IRRI-bred indica varieties was detected in all Tongil-type varieties. We also found that 17 of the japonica varieties contained the Pii gene. The Pii gene in Korean rice varieties originates from the Korean japonica variety Nongbaeg, and Japanese japonica varieties Hitomebore, Inabawase, and Todorokiwase. The Pi5 gene, which clusters with Pii on chromosome 9, was identified only in Taebaeg. Thirty-four varieties were found to contain alleles of the resistance gene Pita or Pita-2. The Pita gene in japonica varieties was found to be inherited from the Japanese japonica genotype Shimokita, and the Pita-2 gene was from Fuji280 and Sadominori. Seventeen japonica and one Tongil-type varieties contained the Piz gene, which in the japonica varieties originates from Fukuhikari and 54BC-68. The Piz-t gene contained in three Tongil-type varieties was derived from IRRI-bred indica rice varieties. The Pi9(t) gene locus that is present in Korean japonica and Tongil-type varieties was not inherited from the original Pi9 gene from wild rice Oryza minuta. The Pik-multiple allele genes Pik, Pik-m, and Pik-p were identified in 24 of the varieties tested. In addition, the Pit gene inherited from the indica rice K59 strain was not found in any of the Korean japonica or Tongil-type varieties tested.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.375-380
• /
• 2008

This study evaluated the effect of an school-based oral health program supplied to primary school children in Anyang city. This program included oral health education, pit and fissure sealing, fluoride mouth rinsing and professional tooth brushing. The numbers of the subjects were 311 children in the program participant group and 165 children in the control group which were not in the program. Data were analyzed with t-test, one way ANOVA and pearson's correlation coefficient using SPSS WIN 12.0 program. In attitude, behavior of oral hygiene, participant group was better than the control group. In case of the perceived oral health, satisfaction of oral health, need oral treatment there was no significant difference between the two groups. These results suggest that school children can learn the good attitude and behaviors and oral health promotion can be achived from the oral health program run by shool dental clinic.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.69-75
• /
• 2002

A number of techniques may be employed to reduce the discomfort of syringe or needle for dental care. The use of topical anesthesia is one such method. Topical anesthetics are applied to alleviate pain during many clinical procedures, such as injection of local infiltration anesthetics, primary tooth extraction, X-ray taking of sensitive patients, reducing gag reflex prior to impression taking. In children, placement of a rubber dam clamp, however, may cause significant discomfort for purpose of pit and fissure sealant and preventive resin restoration(PRR). A topical anesthetic would be beneficial to aid in rubber dam placement for this purpose. It has been suggested that all intra-oral topical anesthetics are equally effective on reflected mucosa, however EMLA(an acronym for eutectic mixture of local anesthetics), which was developed in the 1980s and produces surface anesthesia of skin, has been shown to be more effective than conventional topical anesthetics when used on attached gingivae. This report is topical anesthesized 4 case by EMLA cream, who showed better effect in reducing the pain of infiltration anesthesia, extraction of deciduous teeth, rubber dam clamp placement and reducing the pain of preformed crown adaptation.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.42-48
• /
• 1995

With the aim to investigation of decay resistance and optimum concentration in chrome-copper-arsenic(CCA) preservative treatment on the imported softwoods from Siberia and North america, preservative absorption after CCA impregnation, weight losses and degradation patterns by decay fungi were examined. The density and latewood rate of Siberia softwoods(Spruce and Larch) were higher than those of North america softwoods(Douglas-fir and Western hemlock), resulting in the decrease of the CCA preservative absorption in the Siberia softwoods. In the case of untreated softwoods, decay resistance against Coriolus versicolor was lower than against Tyromyces palustris. For CCA treated softwoods, preservative effectiveness increased with increase in concentration of CCA solution. When treated with 0.7% CCA solution, efficiency value was more than 80 and 90 for C. versicolor and T. palustris, respectively. From this results, in the CCA preservative treatment for imported softwoods, it can be concluded that optimum concentration of CCA solution is approximately 0.7%. The absorption of CCA preservative distributed in the range of 3.8 and $5.5kg/m^3$. After exposure to testing fungi, in the untreated softwoods, bore holes formed in the cell walls and bordered pits, moreover, bordered pit canals enlarged by the fungi. However, 0.5% CCA treated softwoods was almost no deterioration in the cell walls and bordered pits due to decay.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.455-467
• /
• 2006

Demand for appropriate health care has gradually increased in Korea. In addition, developments of community- and school-based oral health programs have also focused oral health care for the oral health promotion. Especially, school-based oral health programs are the underpinnings of promoting oral health and preventing oral diseases among schoolchildren. School-based oral health programs have had three major components: oral health education, oral health services, and a healthful environments. These included oral health education(one-to-one communication, group communication, and use of mass communication), oral examination, fluoride mouthrinsing, pit-and-fissure sealants, fluoride gel application, mechanical plaque control, and chewing xylitol candy. In this study, we evaluate the effects of oral health programs among primary schoolchildren by comparing the oral health knowledge, oral health behaviors, and perception of caries prevention procedures. Data for this study were obtained from 699 primary schoolchildren at the two primary school in Daegu, Korea. One is experimental group, N primary school, that was established school-based oral health center under supervision of Nam-gu Public Health Center, the other is control group, N' primary school, that was yet to establish school-based oral health center. We surveyed children's oral health knowledge and behaviors, and perception of caries prevention procedures using self-administrated questionnaire and then analyzed differences of each item among two groups. The brief findings of this study were summarized as follows. There are several advantage to a comprehensive school-based oral health program. (1) School-based oral health programs facilitate and increase the effectiveness of teaching oral health subjects. (2) Schoolchildren are available for prevention or treatment procedure. (3) School-based oral health center may be less threating than private dental clinic. (4) With comprehensive school-based oral health programs the decayed, missing, and filled teeth(DMFT) of schoolchildren should demonstrate a substantial and steady decrease over time(Choi et al, 2004). In conclusion, treatment is not the answer to solving children's oral health programs; rather primary prevention is the key. Many countries and communities are focusing on hoe millions of underprivileged children can be provided with health care. Schoolchildren gain the knowledge and behaviors to attain and maintain good oral health in schools. For these reasons, the role of school-based oral health center is not only important but also a necessity.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.38-47
• /
• 2005

Compression, lateral, and opposite woods in a branch of Pinus parviflora S. et Z. were described and compared in the qualitative anatomical aspects through light and scanning electron microscopy. Tracheid transition from earlywood to latewood in the compression wood appeared to be relatively more gradual than in the opposite or lateral wood. Growth ring width and proportion of latewood were thought to be greater in the compression wood than in the lateral or opposite wood. The latewood tracheids of compression wood in transverse surface were mostly round, differently from those of lateral and opposite woods with square to angular shapes. Also, intercellular spaces, helical cavities and checks, and slit-like pit apertures were observed only in the compression wood tracheids. Cross-field pitting in the compression wood appeared not to be used as diagnostic guide because of their severe alteration from normal fenestriform or window-like type to cupressoid to taxodioid types. In tangential surface, fusiform rays in the compression wood were wider but lower than those in the lateral wood or opposite wood. In conclusion, compression wood was different from lateral and opposite woods but lateral and opposite woods were almost identical in qualitative anatomical features.