• 한국전기전자재료학회논문지
• /
• 제33권1호
• /
• pp.37-44
• /
• 2020

This study investigated the microstructure and piezoelectric properties of lead-free 0.74(Bi_1/2Na_1/2)TiO₃-0.26SrTiO₃ (BNST26) piezoelectric ceramics sintered using a microwave furnace. For comparison, specimens were also prepared using a conventional furnace sintering (CFS). Average grain sizes of 2.4 ㎛ and 3.2 ㎛ were obtained in the sample sintered at 1,100℃ for 5 min using microwave sintering (MWS) and at 1,175℃ for 2 h using CFS, respectively. To quantify the changes in the microstructures and electrical properties according to the sintering conditions, the polarization hysteresis, bipolar and unipolar strain curves, and temperature dependence of permittivity were evaluated. As a result, it was determined that the P_max (maximum polarization), P_r (remanent polarization) and S_max (maximum strain) values tend to increase with the average grain size. Based on these results, it is concluded that the MWS method can produce lead-free ceramics with superior performance in a relatively short time compared to the conventional CFS method.

• 한국전기전자재료학회논문지
• /
• 제27권6호
• /
• pp.372-376
• /
• 2014

We investigated the effect of excess CuO on the sintering behavior, ferroelectric, and piezoelectric properties of lead-free $Bi_{0.5}(Na_{0.82}K_{0.18})_{0.5}TiO_3$ (BNKT) ceramics. The addition of excess CuO was found to greatly contribute to the densification and grain growth, however, excess CuO over 3 mol% was precipitated at grain boundaries after sintering. BNKT with 1~2 mol% CuO in excess sintered at $975^{\circ}C$ showed piezoelectric properties comparable to those of unmodified BNKT sintered at $1,175^{\circ}C$. These results seem meaningful for its application to low cost multilayer actuators (MLAs) because low firing ceramics make it possible to apply less expensive base metals to the inner electrode of MLAs.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.337-343
• /
• 2020

This study investigated the low temperature sintering with various templates of Bi-based lead-free piezoelectric ceramics. The effects of using CuO-coated Na_0.5Bi_4.5Ti₄O₁₅ templates on the sintering behavior as well as the dielectric, ferroelectric, and piezoelectric properties of Bi_1/2(Na_0.78K_0.22)_1/2TiO₃ (BNKT) ceramics have been examined. In comparison with the specimens sintered with the Na_0.5Bi_4.5Ti₄O₁₅ templates without CuO coating, those sintered with the CuO-coated Na_0.5Bi_4.5Ti₄O₁₅ templates showed larger template sizes as well as a larger electric field induced strain (S_max/E_max) of 422 pm/V after sintering at temperatures as low as 975℃. These results are promising for low-cost multilayer ceramic actuator applications.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.126-129
• /
• 2010

(1-X) $(Na_{0.5}K_{0.5})NbO_3-X$ $K_4CuNb_8O_{23}$ (NKN-X KCN) ceramics were produced using the conventional solid state sintering method, and their sinterability and electric properties were investigated. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCN content and the sintering temperature. In particular, the KCN addition to the NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 2.0 mol% sintered at $1,150^{\circ}C$ possesses the optimum properties (${\varepsilon}_r=241$, $d_{33}=78$, $k_p=0.34$ and $Q_m=1,121$). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.172-173
• /
• 2008

In this study, $0.95(K_{0.5}Na_{0.5})NbO_3$-0.05Li$(Sb_{0.8}Nb_{0.2})O_3$ + $Ag_2O$ + x wt% $MnO_2$ were investigated as a function of the amount of $MnO_2$ addition in order to improve dielectric and piezoelectric properties of Lead-free piezoelectric ceramics. With increasing the amount of $MnO_2$ addition, density and electromechanical coupling factor $(k_p)$ increased up to 0.3wt.% $MnO_2$ and decreased above 0.3wt.% $MnO_2$. At the sintering temperature of 1020 $^{\circ}C$, Electromechanical coupling factor $(k_p)$, density, dielectric constant $({\varepsilon}r)$ and mechanical quality factor $(Q_m)$ of composition ceramics with 0.4wt% $Ag_2O$ addition showed the optimal value of 0.431, 4.33 g/$cm^3$, 820 and 119, respectively.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.29-32
• /
• 2012

Lead-free $0.98(Na_{0.5},K_{0.5})NbO_3-0.02Li(Sb_{0.17}Ti_{0.83})O_3$ (hereafter 0.98NKN-0.02LST) ceramics doped with $Ag_2O$ were prepared using a conventional mixed oxide method. The specimen showed superior structural and electrical properties when 1 mol% $Ag_2O$ was doped. For the 0.98NKN-0.02LST+1.0mol%$Ag_2O$ ceramics sintered at $1,100^{\circ}C$, piezoelectric constant ($d_{33}$) of sample showed the optimum values of 207 pC/N. The 0.98NKN-0.02LST+1.0 mol%$Ag_2O$ ceramics are a promising candidate for lead-free piezoelectric materials.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.355-359
• /
• 2013

In this paper, the $0.995(Li_{0.04}(Na_{0.56}K_{0.44})_{0.96}(Nb_{0.90}Ta_{0.10})_{0.998}Zn_{0.005}O_3+0.005KNbO_3+xwt%\;TeO_2$ lead-free piezoelectric ceramics for energy harvesting devices were fabricated by the conventional mixed oxide method. The microstructure, dielectric, and piezoelectric properties were investigated as a function of the $TeO_2$ addition. All the specimens showed an orthorhombic phase structure. At the composition ceramics doped with 0.1 wt%$TeO_2$, the optimum values of $d_{33}$= 212 pC/N, $d_{33}{\cdot}g_{33}=9.54pm^2/N$, and kp=0.448 were obtained, respectively. The results indicate that the composition ceramics is a promising candidate for energy harvesting devices applications.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.288-292
• /
• 2015

New lead-free piezoelectric ceramics $0.96[\{Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}\}_{1-x}La_x(Ti_{1-y}Nb_y)O_3]-0.04SrTiO_3$ (BNKT-ST-LN, where $x=y=0.00{\leq}(x=y){\leq}0.015)$ were synthesized using the conventional solid-state reaction method. Their crystal structure, microstructure, and electrical properties were investigated as a function of the La and Nb (LN) content. The X-ray diffraction patterns revealed the formation of a single-phase perovskite structure for all the LN-modified BNKT-ST ceramics in this study. The temperature dependence of the dielectric curves showed that the maximum dielectric constant temperature ($T_m$) shifted towards lower temperatures and the curves became more diffuse with an increasing LN content. At the optimum composition (LN 0.005), a maximum value of remnant polarization ($33C/cm^2$) with a relatively low coercive field (22 kV/cm) and high piezoelectric constant (215 pC/N) was observed. These results indicate that the LN co-modified BNKT-ST ceramic system is a promising candidate for lead-free piezoelectric materials.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.728-732
• /
• 2011

In this study, piezoelectric and dielectric properties of Lead-free $0.97[(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3]+0.03[(Bi_{0.5}K_{0.5})TiO_3]$ (abbreviated as 0.97NKNS-0.03BKT)ceramics synthesized by conventional solid-state reaction process were investigated as a function of $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition. The results indicated that the $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition significantly improved the sinterability, grain growth and piezoelctric properties of 0.97NKNS-0.03BKT ceramics. The optimum values as planar piezoelectric coupling coefficient ($k_p$= 0.355), piezoelectric constant ($d_{33}$= 207 pC/N) and mechanical quality factor ($Q_m$= 128) were obtained when 0.009KCT was added. The electromechanical coupling factor($k_p$) was slightly decreased according to the increasing temperature.

• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.191-196
• /
• 2023

In this paper, for the application of ultrasonic cleaners for cleaning dentures and transparent braces, Pb(Mn_1/3Nb_2/3)O₃-Pb(Ni_1/3 Nb_2/3)O₃-Pb(Zr,Ti)O₃ [PMN-PNN-PZT] system ceramics were manufactured and their dielectric and piezoelectric properties were investigated. Overall the best properties suitable for the device applications such as ultrasonic cleaner were obtained from the ceramics sintered at 920℃: bulk density of 7.8 g/cm³, the dielectric constant (ε_r) of 1,689, piezoelectric charge constant (d₃₃) of 433 pC/N, planar electromechanical coupling factor (k_p) of 0.64, mechanical quality factor (Qm) of 835, S₁₁^E of 13.37 (10^-12 N/m²), and Curie temperature of 315℃ By using the physical properties of this composition, the ultrasonic cleaner was designed and simulated using the commercial ATILA software. For the three-layered ceramics with the dimension of 25 mm × 25 mm × 2.5mm, an excellent displacement of 8.998 10^-3 m) and the sound pressure of 147.68 dB were recorded.