• 동력기계공학회지
• /
• 제1권1호
• /
• pp.106-123
• /
• 1997

In this study, vehicle directional stability is investigated for limit driving for crash avoidance maneuver using a full vehicle dynamic model. The model was analytically validated using typical step steering and lane change simulation. Limit driving condition for the vehicle model was quoted from research results of references. It was demonstrated that instable vehicle motion was caused by not only road conditions but also driving conditions. Also, the simulation showed that braking combined with steering caused very hazardous situation in crash avoidance maneuver. Finally, phase plane plot approach was used to evaluate the dynamic instability.

• Structural Engineering and Mechanics
• /
• 제24권6호
• /
• pp.727-740
• /
• 2006

A simple plane-strain solution is derived in this paper for the functionally graded multilayered isotropic elastic cylinder under static deformation. The solution is obtained using method of separation of variables and is expressed in terms of the summation of the Fourier series in the circumferential direction. While the solution for order n = 0 corresponds to the axisymmetric deformation, that for n = 2 includes the special deformation frequently utilized in the upper and lower bounds analysis. Numerical results for a three-phase cylinder with a middle functionally graded layer are presented for both axisymmetric (n = 0) and general (n = 2) deformations, under either the traction or displacement boundary conditions on the surface of the layered cylinder. The solution to the general deformation case (n = 2) is further utilized for the first time to find the upper and lower bounds of the effective shear modulus of the layered cylinder with a functionally graded middle layer. These results could be useful in the future study of cylindrical composites where FGMs and/or multilayers are involved.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.181-193
• /
• 2010

The paper presents an alternative way to classical stereocorrelation. First, 2D image processing of random patterns is described. Sub-pixel displacements are determined using phase analysis. Then distortion evaluation is presented. The distortion is identified without any assumption on the lens model because of the use of a grid technique approach. Last, shape measurement and shape variation is caught by fringe projection. Analysis is based on two pin-hole assumptions for the video-projector and the camera. Then, fringe projection is coupled to in-plane displacement to give rise to 3D measurement set-up. Metrological characterization shows a resolution comparable to classical (stereo) correlation technique ($1/100^{th}$ pixel). Spatial resolution seems to be an advantage of the method, because of the use of temporal phase stepping (shape measurement, 1 pixel) and windowed Fourier transform (in plane displacements measurement, 9 pixels). Two examples are given. First one is the study of skin properties; second one is a study on leather fabric. In both cases, results are convincing, and have been exploited to give mechanical interpretation.

• Steel and Composite Structures
• /
• 제38권4호
• /
• pp.355-363
• /
• 2021

The present paper attempts to investigate the propagation of plane waves in an isotropic elastic medium under the effect of initial stress and temperature-dependent properties. The modulus of elasticity is taken as a linear function of the reference temperature. The formulation is applied under the thermoelasticity theory with dual-phase-lag; the normal mode analysis is used to obtain the expressions for the displacement components, the temperature, the stress, and the strain components. Numerical results for the field quantities are given in the physical domain and illustrated graphically. Comparisons are made with the results predicted by different theories (Lord-Shulman theory, the classical coupled theory of thermoelasticity and the dual-phase-lag model) in the absence and presence of the initial stress as well as the case where the modulus of elasticity is independent of temperature.

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.339-345
• /
• 2022

In this paper, the effect of porosity on the acoustic phase velocity of the 3D printed Kelvin closed-cell structure was investigated using the spectral phase analysis. Since Kelvin cells bring about the large amount of scattering, acoustic pulses in ultrasonic measurements undergoes a distortion of waveforms due to the dispersion effect. In order to take account on the dispersion, mathematical expressions for calculating the phase velocity of longitudinal waves propagating normal to the plane of the Kelvin structure are suggested by introducing a complex wave number based on Fourier transform. 3D Kelvin structure composed of identical unit-cells, a polyhedron of 14 faces with 6 quadrilateral and 8 hexagonal faces, was developed and fabricated by 3D CAD and 3D printer to represent the micro-structure of porous materials such as aluminum foam and cancellous bone. Total nine samples of 3D Kelvin structure with different porosity were made by changing the thickness of polyhedron. Ultrasonic pulse of 1MHz center frequency was applied to the Kelvin structures for the measurement of the phase velocity of ultrasound using the TOF(time-of-flight) and the phase spectral method. From the experimental results, it was found that the acoustic phase velocity decreased linearly with the porosity.

• 대한전자공학회논문지
• /
• 제19권2호
• /
• pp.38-50
• /
• 1982

이 논문에서는 변형된 디지탈 Costas loop이라고 불리우는 새로운 형의 digital phase-locked loop(DPLL)을 제안하고 성능을 해석하였다. 제안된 DPLL의 주요 특성은 tan-1(·) 함수를 DPLL에 사용함으로써 phase error detector가 선형 특성을 갖게 되고, 따라서 mod-2π 선형 difference equation에 의해서 그 특성을 설명할 수 있다. 본 논문은 2부로 나뉘어져 1부에서는 먼저 제안된 시스템을 설명하고 잡음이 없는 경우 Phase plane방법에 의해서 1차와 2차 loop의 성능을 해석했다. 초기 조건에 관계없이 locking이 될 수 있는 locking 범위의 식을 유도하고, 경우에 따라서 일어날 수 있는 false lock 또는 oscillation 현상을 설명했다. 이론적인 모든 해석은 컴퓨터 시뮬레이션에 의해서 입증되었다. 논문의 2부에서는 잡음이 있을 경우에 제안된 DPLL의 성능을 해석하였다. Chapman-Kolmogorov 방정식을 사용하여 제안된 시스템의 phase error의 steady state probability density함수, mean 및 variance를 얻었다. 이 결과들은 제 2부에 게재 될 것이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1603-1606
• /
• 2007

The TPS (Temperature Programmed Sublimation) technology has been developed to monitor the plane evaporation of the organic films and introduced in SID2007, P53.[4] The Alq3 organic film is deposited on various metal surface such as Cu, Ti, Invar, STS to sublimate. The TPS signal confirms that the Alq3 film consists of nano scale film phase and bulk phase on all the metal plates. The sublimation temperature of the Alq3 film was much lower ($130^{\circ}C$) than the vapor temperature ($265^{\circ}$) of the Alq3 powder.

• Geomechanics and Engineering
• /
• 제31권2호
• /
• pp.159-166
• /
• 2022

The model of two-dimensional plane waves is analyzed in a micropolar-thermoelastic solid with microtemperatures in the context of the three-phase-lag model, dual-phase-lag model, and the Green-Naghdi theory of type III. Harmonic wave analysis is used to hold the solution to the problem. Numerical results of the physical fields are visualized to show the effects of the gravity field, magnetic field, and viscosity. The expression for the field variables is obtained generally and represented graphically for a particular medium.

• 대한전자공학회논문지
• /
• 제20권4호
• /
• pp.55-60
• /
• 1983

입력신호와 비교신호와의 시간오차를 다치 양자화하는 시간 오차 검출기(TED)를 고찰하여 새로운 형태의 디지탈 위상고정회로(DPLL)를 제안하고 성능을 해석하였다. 본 논문에서 고안된 TED는 선형적인 특성을 갖게 되므로 DPLL의 동작은 선형 차분 방정식으로 해석된다. 잡음이 없는 경우에, 유도된 시스템 방정식을 해석하여 제안된 DPLL 입력신호의 초기 시간차이에 관계없이 입력신호의 위상과 주파수를 추적할 수 있는 조건 및 그에 따른 주파수 추적 범위를 구했으며 타이밍 에러 플레인(timing error plane) 방법 및 컴퓨터 시뮬레이션을 통해 앞에서 해석된 결과들이 잘 일치함을 보였다.

• 대한두개안면성형외과학회지
• /
• 제22권1호
• /
• pp.45-51
• /
• 2021

Background: Mandibular deficiency leading to facial asymmetry causes cosmetic deformity as well as psychological stigma for the patient. Correction of these mandibular asymmetries is a major challenge. The study investigates the efficacy of bidirectional mandible distraction for the treatment of mandibular deficiency. Methods: This prospective study included six individuals aged between 17 and 24.4 years. Five patients had hemifacial microsomia and one had unilateral temporomandibular joint ankyloses. All patients underwent mandibular distraction osteogenesis. Postoperative skeletal changes in affected mandible, and changes in occlusal plane and oral commissure cant were evaluated using three-dimensional reconstruction. Patient satisfaction and understanding of the procedure were assessed through three questionnaires administered during pre-distraction, distraction and post-distraction phases. Results: In pre-distraction phase, aesthetic appearance seemed to be the primary indication for surgery. In distraction phase, pain while chewing was the primary handicap. In post-distraction phase all patients were satisfied with the aesthetic outcome. The facial deformity was improved through mandibular distraction osteogenesis. On the affected side in all the patients, height and length of the mandible increased. Canting of the occlusal plane and oral commissure was corrected. Conclusion: Bidirectional mandible distraction is an effective treatment for correction of mandible deformities in adult patients.