• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.307-310
• /
• 2008

Nonlinear Vortex Strength Correction Method is developed for improvement of vortex lattice method which can't calculate the separated flow conditions and the viscous effect. In this method, the vortex strength on the blade surface is determined by matching the lift force from vortex lattice method with the lift force from aerodynamic coefficients table as the same circulation is added to or subtracted from all chord wise vortices. For considering the nonlinearities due to the neighboring blade sections, sophisticated Newton-Rapson algorithm is applied. The validation of this method was done by comparing the simulations with the measurements on the NREL Phase-VI horizontal axis wind turbine(HAWT) in the NASA Ames wind tunnel under uniform conditions. This method gives good agreements with experiments in most cases.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.787-790
• /
• 2004

In this paper, a novel control scheme compensating for source voltage unbalance and current harmonics and power factor correction in unified active power filter systems combined with shunt passive filters is proposed, where no low/high-pass filter are used in deriving the reference voltage for compensation. Using digital all-pass filters, the phase angle and the reference voltages compensating for harmonic current and unbalanced voltage are derived from the positive sequence component of the unbalanced voltage. The amplitude of d-axis current in a series filter is controlled as zero for power factor correction. The validity of the proposed control scheme has been verified by experimental results.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 Asia Navigation Conference
• /
• pp.29-36
• /
• 2004

The paper describes recent experimental results on the development of Digital Magnetic Compass (DMC), which can provide smart automatic correction functions to the magnetic interferences. The design methodology of magnetic sensing circuit with ring-core fluxgate sensor is represented. The performance results of the sensing circuits are discussed with error analysis by polynomial regressions. As test results, the sensing circuit filtered only the second harmonic signal that is proportional to the direction of earth's magnetic field, and it leads to the obtainment of bearing information. In addition, the total residual errors of DMC can be analyzed by the adoption of polynomial regressions. It shown that the possibility of high precise DMC, in the future.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.742-753
• /
• 2014

In this paper, a new continuously and linearly controlled capacitive static VAR compensator is proposed for the automatic power factor correction of inductive single phase loads in 220V 50Hz power system networks. The compensator is constructed of a harmonic-suppressed TCR equipped with a new adaptive current controller. The harmonic-suppressed TCR is a new configuration that includes a thyristor controlled reactor (TCR) shunted by a passive third harmonic filter. In addition, the parallel configuration is connected to an AC source via a series first harmonic filter. The harmonic-suppressed TCR is designed so that negligible harmonic current components are injected into the AC source. The compensator is equipped with a new adaptive closed loop current controller, which responds linearly to reactive current demands. The no load operating losses of this compensator are negligible when compared to its capacitive reactive current rating. The proposed system is validated on PSpice which is very close in terms of performance to real hardware.

• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.794-806
• /
• 2004

본 논문에서는 IEEE 802.11a의 OFDM 통신시스템에 대한 송수신 주파수편차의 교정기법을 연구하고 편차주파 수들의 교정오차에 의한 잡음을 분석한다. 반송주파수편차에 의한 심볼당 회전위상을 짧은 훈련신호(short preamble)의 자기상관에서 추정한다. 잡음의 영향을 줄이기 위하여 짧은 훈련신호(short preamble)를 과도표본화 (over-sampling)한다. 파일롯(pilot) 신호를 도입하여 추정된 반송주파수편차의 오차와 표본화 주파수편차에 의한 OFDM 심볼당 회전위상을 추정한다. 이러한 회전위상의 추정과 교정에 CORDIC(Coordinated Rotational Digital Computer) 프로세서 또는 각도와 복소수의 환산표를 사용하고 이것들의 구현기법과 장단점을 비교한다. 복소수와 위상은 CORDIC 프로세서와 환산표에서 한정된 비트(bit) 개수로 계산되므로 각도양자화 오차가 있게 된다. 비트개수에 따른 각도양자화 오차를 OFDM 신호의 SNR로 나타내고 IEEE 802.11a의 편차주파수 교정에서 요구되는 최소한의 비트 개수를 제시한다. 끝으로, 모의실험을 통하여 짧은 훈련신호로 반송주파수편차를 추정하고 CORDIC 프로세서와 환산표에서 사용된 비트 개수에 따른 양자화 잡음을 검증한다.

• Journal of Electrical Engineering and Technology
• /
• 제7권1호
• /
• pp.1-8
• /
• 2012

The current paper presents a novel control strategy of a three-phase, four-wire Unified Power Quality (UPQC) to improve power quality. The UPQC is realized by the integration of series and shunt active power filters (APF) sharing a common dc bus capacitor. The realization of shunt APF is carried out using a three-phase, four-leg Voltage Source Inverter (VSI), and the series APF is realized using a three-phase, three-leg VSI. To extract the fundamental source voltages as reference signals for series APF, a zero-crossing detector and sample-and-hold circuits are used. For the control of shunt APF, a simple scheme based on the real component of fundamental load current (I $Cos{\Phi}$) with reduced numbers of current sensors is applied. The performance of the applied control algorithm is evaluated in terms of power-factor correction, source neutral current mitigation, load balancing, and mitigation of voltage and current harmonics in a three-phase, four-wire distribution system for different combinations of linear and non-linear loads. The reference signals and sensed signals are used in a hysteresis controller to generate switching signals for shunt and series APFs. In this proposed UPQC control scheme, the current/voltage control is applied to the fundamental supply currents/voltages instead of fast-changing APF currents/voltages, thus reducing the computational delay and the required sensors. MATLAB/Simulink-based simulations that support the functionality of the UPQC are obtained.

• 한국측량학회지
• /
• 제26권6호
• /
• pp.617-624
• /
• 2008

일반적으로 단일기준국을 이용하는 실시간 동적(Real Time Kinematic) GPS는 무선모뎀을 통해 반송파 오차보정량을 이동국으로 전송하여 현장에서 바로 고정밀의 위치를 결정할 수 있다. 하지만 단일기준국 방식은 각 위성마다의 시간대별 반송파 측정값을 지속적으로 제공해야 하며, 전송장해와 모뎀간의 거리 따른 증가 등으로 위치정확도가 저하되는 단점이 있다. 본 논문은 이러한 단점을 보완하기 위해 3대 이상의 다중기준국을 활용한 네트워크 기반의 GPS 반송파 상대측위기술을 구현하였으며, Visual C++로 제작된 실시간 모니터링 프로그램을 이용하여 RTK 네트워크를 구성하였다. 네트워크 구성에서 얻어지는 다중기준국의 오차보정량 가운데 최적의 값을 자동으로 선택하고, GPS buoy 이동국에 적용하여 해수면 관측을 수행하였으며, 이를 통해 얻어진 해수면 변동량을 단일기준국과 비교, 분석하여 결과를 도출하였다.

• 한국음향학회지
• /
• 제40권6호
• /
• pp.546-554
• /
• 2021

수중 탐지를 위한 합성개구소나(Synthetic Aperture Sonar, SAS) 신호처리에서는 탑재플랫폼이 직선경로를 따라 주행한다고 가정한다. 그러나 실제로는 플랫폼의 복잡한 운동에 따른 궤적 교란으로 인해 SAS 영상에 번짐과 같은 왜곡이 발생한다. 본 연구에서는 예인형 SAS 개발을 위해 궤적 교란에 의한 SAS 영상 왜곡을 개선하기 위한 방법으로서, Redundant Phase Center (RPC)을 이용한 예인체 운동 추정 및 영상 보정, 그리고 자동 초점 기법인 Phase Gradient Autofocus (PGA) 기법에 대해 검토하였다. 그리고 시뮬레이션을 통해, sway로 인해 왜곡된 SAS 영상에 이 기법들을 적용하고 그 성능 및 유효성에 대해 살펴보았다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.384-387
• /
• 2000

In this paper Power factor correction circuit of single-phase three-level boost converter is proposed. The advantage of the proposed control scheme for three-level boost converter are low blocking voltage of each power device low THD(Total Harmonic Distortion) and high power factor. The control scheme is based on the current comparator capacitor compensator and region detector, In simulations the proposed system is validated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.659-662
• /
• 1999

As utility pollution take a growing interest, ac/dc converter optimizing utility condition has been vigorously studied in decades. In this paper three phase DCM converter is analyzed and equations for average input currents are presented. Also relationships of voltage gain & duty according to angular velocity are presented and variable frequency controller is implemented using reset integrator which is designed in detail. In result power factor and THD characteristics of 3-stage and 4-stage operation ae compared respectively.