• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.217-226
• /
• 1993

Stream sediment samples were collected in the vicinity of the Sambo Pb-Zn-barite mine in order to investigate dispersion patterns and pollution levels of heavy metals, and to find out their mode of occurrences. Those samples were analyzed for Cd, Cu, Pb, Zn, Fe, and Mn by using partial extraction and sequential extraction methods. Stream sediments of this studied area has been contaminated severely by Pb, Zn, and Cd. Dispersion patterns of heavy metals in those sediments are different according to their pollution source and sampling distance from the mine. The stream sediment pH is generally neutral in control area, and is slightly acidic in the lower part of tailing dam. The main pollution source of stream sediments was confirmed as tailing and mine drainage. Their pollution level depends mainly on inflowed water and distance from the mine. The tolerance index ranges from -0.9 to 0.7. The mode of occurrances of heavy metals in polluted stream sediment are identified as Fe-Mn oxides, organic bounded and carbonate-bounded compound which show high potential of bioavailablity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.885-893
• /
• 2014

This research reports the enhanced Electrokinetic (EK) with $H_2O_2$ and sodium dodecyl surfate (SDS), which are commonly used in Fenton oxidation and soil flushing method, in order to remediate soil contaminated with heavy metals and Total Petroleum Hydrocarbons (TPH) simultaneously. In addition, influences of property of soil and concentration of chemical solution were investigated through experiments of different types of soils and varying concentration of chemical reagents. The results indicated, in the experiments using artificially contaminated soil, the highest removal efficiency of heavy metals using 10% $H_2O_2$ and 20mM SDS as electrolytes. However, in the experiments using Yong-San soils (study area), remediation efficiency of heavy metals was decreased because high acid buffering capacity. Through experiment of 20% $H_2O_2$ and 40mM SDS, increased electric current influences the remediation of heavy metals due to decrease in the soil pH. In the experiments of Yong-San soils, the remediation efficiency of TPH was decreased compared with artificially spiked soils because high acid buffering capacity and organic carbon contents. Furthermore, the scavenger effect of SDS influenced TPH oxidation efficiency under the conditions of injected 40mM SDS in the soils. Therefore, the property of soil and concentration of chemical reagents cause the electroosmotic flow, soil pH, remediation efficiency of heavy metals and TPH.

• Microbiology and Biotechnology Letters
• /
• v.31 no.4
• /
• pp.408-412
• /
• 2003

The purpose of this study was to evaluate the Influence of oil concentration and inoculum size on petroleum biodegradation in soil by Nocardia sp. H17-1, isolated from oil-contaminated soil. To investigate the effect of initial oil concentration on total petroleum hydrocarbon (TPH) degradation, the soil was artificially contaminated with 10, 50 or 100 g of Arabian light oil per kg of soil, respectively. After 50 days, Nocardia sp. H17-1 degraded 78,94 and 53% of the each initial TPH concentration, respectively. Also, it produced 1.35, 4.21, and 5.91 mmol of $CO_2$ per g of soil, respectively. The degradation rate constant (k) of TPH was decreased in proportion to the initial oil concentrations while $CO_2$ production was increased with the concentration. The growth of Nocardia sp. H17-1 was remarkably inhibited when it was inoculated into soil containing 100 g of oil per kg of soil. To evaluate the effect of the inoculum size, the soil was artificially contaminated with 50 g of Arabian light oil per kg of soil, and inoculated with $3${\times}$10^{6}$ , $5${\times}$10^{7}$ , $2${\times}$10^{8}$ cells per g of soil, respectively. After 50 days, the degradation of TPH was remained with similar in all treatment but degradation rate constant (k) and evolved $CO_2$ was increased with increasing the inoculum size.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.5
• /
• pp.81-87
• /
• 2008

In accompany with the transfer of US army bases, recent surveys reported serious contamination of soils by the release of petroleum from storage facilities and heavy metals accumulated in rifle-ranges. These problems have made an increased concerns of cleanup technology for contaminated soils. In this study, a full-scale soil washing process improved by multistage continuous desorption and agitational desorption techniques was examined for petroleum-contaminated soils obtained from three different remedial sites that contained 29.3, 16.6, and 7.8% of silt and clay, respectively. The initial concentrations of total petroleum hydrocarbon (TPH) were 5,183, 2,560, and 4,860 mg/kg for each soil. Pure water was applied to operate washing process, in which water used for washing process was recycled 100% for over 6 months. The results of full-scale washing tests showed that the TPH concentrations for soils (> 3.0 mm) were 50${\sim}$356 mg/kg (85.2${\sim}$98.2% removal rates), regardless of the contents of silt and clay from in A, B and C soil, when the soils were washed at 3.0 kg/$cm^2$ of injection pressure with the method of wet particle separation. Based on the initial TPH concentration, the TPH removal rates for each site were 85.2, 98.2 and 89.9%. For soils in the range of 3.0${\sim}$0.075 mm, the application of first-stage desorption technique as a physical method resulted 834, 1,110, and 1,460 mg/kg of TPH concentrations for each soil, also additional multi-stage continuous desorption reduced the TPH concentration to 330, 385, and 245 mg/kg that were equivalent to 92.4, 90.6, and 90.1% removal rates, respectively. The result of multi-stage continuous desorption for fine soil (0.075${\sim}$0.053 mm) were 791, 885, and 1,560 mg/kg, and additional agitation desorption showed 428, 440, and, 358 mg/kg of TPH concentrations. Compared with initial concentration, the removal rates were 92.0, 93.9 and 92.9%, respectively. These results implied we could apply strategic process of soil washing for varies types of contaminated soils to meet the regulatory limit of TPH.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.85-103
• /
• 2023

The in-situ remediation of a solidified stratum containing a large amount of fine-texture material like clay or organic matter in contaminated soil faces limitations such as increased remediation cost resulting from decreased purification efficiency. Even if the soil conditions are good, remediation generally requires a long time to complete because of non-uniform soil properties and low permeability. This study assessed the remediation effect and evaluated the field applicability of a methodology that combines pneumatic fracturing, vacuum extraction, and plasma blasting (the PPV method) to improve the limitations facing existing underground remediation methods. For comparison, underground remediation was performed over 80 days using the experimental PPV method and chemical oxidation (the control method). The control group showed no decrease in the degree of contamination due to the poor delivery of the soil remediation agent, whereas the PPV method clearly reduced the degree of contamination during the remediation period. Remediation effect, as assessed by the reduction of the highest TPH (Total Petroleum Hydrocarbons) concentration by distance from the injection well, was uncleared in the control group, whereas the PPV method showed a remediation effect of 62.6% within a 1 m radius of the injection well radius, 90.1% within 1.1~2.0 m, and 92.1% within 2.1~3.0 m. When evaluating the remediation efficiency by considering the average rate of TPH concentration reduction by distance from the injection well, the control group was not clear; in contrast, the PPV method showed 53.6% remediation effect within 1 m of the injection well, 82.4% within 1.1~2.0 m, and 68.7% within 2.1~3.0 m. Both ways of considering purification efficiency (based on changes in TPH maximum and average contamination concentration) found the PPV method to increase the remediation effect by 149.0~184.8% compared with the control group; its average increase in remediation effect was ~167%. The time taken to reduce contamination by 80% of the initial concentration was evaluated by deriving a correlation equation through analysis of the TPH concentration: the PPV method could reduce the purification time by 184.4% compared with chemical oxidation. However, the present evaluation of a single site cannot be equally applied to all strata, so additional research is necessary to explore more clearly the proposed method's effect.

• Economic and Environmental Geology
• /
• v.27 no.1
• /
• pp.101-113
• /
• 1994

Geochemical investigations based on measurements of water parameters and sampling of stream sediments have been carried out, in the Okdongcheon stream and its tributaries in the Sangdong area of South Korea. There are two main problems occurring in the Okdongcheon stream: an acid mine drainage in the upper reaches and toxic trace metal contamination of the stream sediments mainly in the lower reaches. Acid mine water originating from coal mining was neutralized at the confluence of the Cheonpyongcheon stream whilst suspended solids due to flocculation of iron in water caused turbidity which was undesirable. Sediments in the Okdongcheon stream have been contaminated by mining activites. Iron was heavily concentrated in sediments in the upper Okdongcheon whilst toxic trace metals including Pb, Cu, Zn, Co, Cd, As and Bi were accumulated in sediments at stations draining metallic mining areas and near the tailings dam. There is now a requrement to neutralise the acid mine drainage and to use site-specific analysis of biological communities to ensure the conservation and preservation of aquatic organisms.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.62-67
• /
• 2011

This study has been investigated for characteristic of removal on the effect of changes in soil moisture, microwave power, and temperature through the decomposition of oil-contaminated soil under high temperature conditions with high temperature heating elements and microwave. A lubricating oil having long carbocyclic(C18-C50) commonly known as a non-resolvable material was treated and the efficient for removal of TPH(Total Petroleum Hydrocarbon) obtained 85.2% at 6 kW and $700^{\circ}C$ and thus the contaminant was found to be removed to 1788 mg/kg for 40 minutes. In case of contaminated soil by light oil and gasoline, the amount of removal was achieved with 567 mg/kg at 6 kW, 500 for 20 minutes that corresponds to reach 98.4% of treatment efficient. In addition, non-resolvable materials contaminated by oil reached TPH concentration on 2,000 mg/kg of worrisome level of soil contamination in the 3-zone at 6kW, $700^{\circ}C$, and 30 minutes, and processing cost at this time was about 8,173 won per ton.

• Microbiology and Biotechnology Letters
• /
• v.35 no.4
• /
• pp.261-271
• /
• 2007

Phytoremediation is an economic and environmentally friendly technique to remediate contaminated-soil. In this study, the effects of plants, rhizobacteria and physicochemical factors on phytoremediation have been reviewed. For successful phytoremediation, the selection of plants is primarily important. To remediate soil contaminated with petroleum hydrocarbon, raygrass (Lolium multiflorum lam), white mustard, vetch (Vicia villosa), tall fescue (Festuca arundinacea), legumes, poplar, and Pine (Pinus densiflora) were mainly applied, and the removal efficiency of petroleum hydrocarbon were ranged 68 to 99%. Corn (Zea mays), raygrass (Lolium multiflorum lam), vetch (Vicia villosa), mustard, clover (Trifolium repens), and tall fescue (Festuca arundinacea) were used for the removal of polycyclic aromatic hydrocarbon, and their removal efficiencies were 50-98%. Rhizobacteria play significant roles for phytoremediation because they can directly participate in the degradation of contaminant as well as promoting plants growth. The following rhizobacteria were preferred for phytoremediation: Azospirillum lipoferum, Enterobactor cloacae, Azospirillum brasilense, Pseudomonas putida, Burkholderia xenovorans, Comamonas testosterone, Pseudomonas gladioli, Azotobacter chroococcum, Bacillus megaterium, and Bacillus subtilis. Pysicochemical factors such as pH, temperature, nutrient, electron acceptor, water content, organic content, type of contaminants are consequential limiting factors for phytoremediation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.228-234
• /
• 2008

The purpose of this study was to predict environmental distribution of anthracene, benzene, benzo[a]pyrene, 1-methylphenanthrene and phenanthrene in a four phase biopile system - air, water, soil and non aqueous phase liquid (NAPL) phase using level I fugacity model. Soil samples used for this study were collected from three sites in the United Kingdom which were historically contaminated with petroleum hydrocarbons. The level I fugacities (f) for the five contaminants were markedly different, however, the fugacities of each contaminant in three soil samples did not show significant difference. NAPL and soil were the dominant phases for all five contaminants. Results of this study indicated that difference in percentage of organic carbon strongly influenced the partitioning behavior of the cntaminants. The presence of benzene calls for an urgent need for risk-based management of air and water phase. Whereas insignificant amount of chemicals leached in the water phase for other organic contaminants showing greatly reduced potential of groundwater contamination. Furthermore, this study helped us to confirm the association of risk critical contaminants with the residual saturation in treated soils. They also can be used to emphasize the importance of accounting for the partitioning behavior of both NAPL and soil phases in the process of the risk assessment of the sites contaminated with petroleum hydrocarbons.

• Economic and Environmental Geology
• /
• v.24 no.2
• /
• pp.97-105
• /
• 1991

Oxygen and sulfur isotope composition of pyrophyllite and pyrite from six pyrophyllite deposits in the Yangsan-Milyang areas (the Cheonbulsan, Dumyong, Dongrae, Youkwang, Sungjin and Milyang mines), and five deposits in the Whasoon-Dado-Haenam areas (the Byuksong, Songseok, Dado, Bugock and Nowha mines) were measured. Pyrophyllite ores both from the Yangsan-Milyang areas and the Dado-Haenam areas are composed mainly of high alumina minerals such as pyrophyllite, sericite and kaolinite. Most of altered rocks show diagnostic chacteristics of bleaching effect. Major minerals of the Songseok ore deposit in the Whasoon area are pyrophyllite, and diaspore with minor amounts of kaolinite and quartz. The Byuksong ores from the Whasoon area were composed mainly of andalusite, kaolinite, pyrophyllite and mica with small amounts of chloritoid, quartz and carbonaceous matter. The Byuksong and Songseok ores show metamorphic textures such as porphyroblastic, and pressure solution textures, and have low whiteness values, The ${\delta}^{18}O$ values of pyrophyllite from the Cheonbulsan and Dumyong mines in the Yangsan area, and the Dado and Nowha mines in the Dado-Haenam areas were in the range of 0.23~5.36%,. The relatively low 8 180 values provide conclusive evidence for hydrothermal activity in these deposits. The ${\delta}^{18}O$ values of pvrophvllite from the Songseok mine in the Whasoon area were measured as 6.70-8.13%, and these higher ${\delta}^{18}O$ values suggest that the Songseok ore deposit have been probably subjected to metamorphism. ${\delta}^{34}$S(pyrito) values from the Cheonbulsan, Dumyong, Youkwang, Dongrae, Sungjin and Milyang deposits in the Yangsan-Milyang areas, and the Dado pyrophyllite deposits in the Dado area range from -5.8 to 2.7%, which means that the pyrite sulfur could be of igneous origin. ${\delta}^{34}$S(pyrito) from the Nohwa mine in the Haenam area is, however, measured as -12.4%" implying the contamination of sulfur derived from the sedimentary country rocks. All of the studied high alumina deposits in the Yangsan-Milyang areas and the Dado-Haenam areas were hydrothermal in origin, whereas the Byuksong and Songseok ore deposits in the Whasoon area were probably of metamorphic origin.